Radius Belalatus ten User manual

O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s ten_v01.docx S e i t e 1v o n 9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
These operating instructions are valid for the belalatus® fan-shaped
awnings with different dimensions and opening angles
Table of contents:
1 Safety requirements ...................................................................................................................................... 2
1.1 Explanations of symbols and notes.................................................................................................. 2
1.2 General safety instructions............................................................................................................... 2
1.3 Using the fan ..................................................................................................................................... 3
1.4 Scope of delivery............................................................................................................................... 4
1.5 Customer accomplishment............................................................................................................... 4
1.6 Options .............................................................................................................................................. 4
2 Operation....................................................................................................................................................... 5
3 Operation with a smartphone-app................................................................................................................ 5
3.1 Pairing with the Radius smartphone-app ........................................................................................ 5
3.2 Opening and closing the fan............................................................................................................. 6
3.3 Favorite ............................................................................................................................................. 6
3.4 Additional information ..................................................................................................................... 7
4 Operation with a radio handled transmitter................................................................................................. 7
5 Operation with SOMFY Telis RTS................................................................................................................... 8
6 Troubleshooting ............................................................................................................................................ 9

O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s ten_v01.docx S e i t e 2v o n 9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
1 Safety requirements
1.1 Explanations of symbols and notes
Warnings
Attention
General notes
1.2 General safety instructions
Together with the technical information for installation and operation, the safety regulations
form the basis for the safe use of the fan. They must be read, followed and kept for later
use before the fan is installed and used. This also includes the "Vibradorm Installation and
Operating Instructions for the MCTxI-HBC Control Unit".
Failure to observe the safety regulations and instructions in the installation and operating
instructions can result in serious damage to persons and material, for which the
manufacturer expressly disclaims all liability or warranty!
The fan must be closed when the wind picks up or gusts of wind are approaching.
Unattended fans must not be left open unless the purchased system has a wind monitor
that works with the fan. Surprising strong winds could cause serious damage.
As the connection between the control unit (radio remote control or smartphone) and the
control unit is established via Bluetooth, the possibility of external influences influencing this
connection cannot be excluded. Accordingly, the following possibilities of external influence
must be avoided:
Electromagnetic interference (EMC), e.g. also from WLANs, cordless phones or
microwave ovens
Manipulation of the Bluetooth interface by third parties
Unwanted operation of the system by third parties via smartphone (app)
(prerequisite: smartphone with installed operating app near the receiver, smartphone /
controller have to be paired)
With all the possibilities of external influences mentioned, there is a possibility of
unintentional movement of the drives, which can lead to danger to persons.

O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s ten_v01.docx S e i t e 3v o n 9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
1.3 Using the belalatus® ten
When installing and operating the fan awning, the intended use must be observed:
The fan-shaped awning (fan) is to be used exclusively as weather-resistant sun
protection. The wind resistance of the open fan is limited and the information on this
assumes that it is installed according to the instructions.
The wind resistance of the opened fan is limited. The fan must be closed when the wind
picks up or gusts of wind are approaching. Unattended fan awnings must not remain
open. Surprising strong winds could cause serious damage.
Before opening and closing the fan, check that there are no obstacles in the travel range.
The fan awning may not be modified or hung with foreign material.
Only use the sunblind in an undamaged condition and pay attention to possible faults.
Arrange for its professional repair before further use!
Only use original Radius accessories and spare parts to ensure safety, unadulterated
comfort and flawless function.
Where appropriate, a self-standing, stable climbing aid shall be used to attach or remove
a protective cover. Make sure that it cannot tip over or slip away.
The individual fan motors have overload protection. If a motor is moved for 6 minutes, it
is blocked for 18 minutes. Only after this time is further operation possible again.
However, an exception is a "priority signal" from a connected wind monitor or KNX
system.
Conversions or changes to the fan, control unit, remote control, motor and all connecting
cables are prohibited!
The controller may only be operated with the mains voltage specified on the type plate!
It is essential to use the supplied power cord. Operating the control unit with a damaged
power cable is prohibited!
Electrical cables must not be exposed to any danger of crushing, bending or tensile
stress.
It shall be possible to switch the control system on and off by means of an electric switch
which can be operated quickly and easily even in an emergency situation.
If the control unit is exposed to sunlight, it must be protected from direct sunlight
with a well ventilated protective hood. The control unit has an IP 65 water
protection rating.

O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s ten_v01.docx S e i t e 4v o n 9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
1.4 Scope of delivery
An electrically operated fan consists of the following components:
1. Fan-shaped awning
2. Control module
(control box, remote
control and power cable)
3. Antenna
4. Sun and wind sensor
(optional)
1.5 Customer accomplishment
mounting device, console (varies depending on the place of installation)
on-site installation material (sleeves, screws, bases, etc.)
electrical supply lines
mounting the fan
1.6 Options
protective cover
wind monitor with receiver for radio control
well-ventilated protective hood
Example of a
mounting device
Well-ventilated protective hood

O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s ten_v01.docx S e i t e 5v o n 9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
2 Operation
The belalatus® ten is put into operation by the commissioning personnel, for whom basic
knowledge of mechanical and electrical engineering is required.
Once the belalatus® ten has been professionally commissioned, this innovative fan can be
operated conveniently via various options:
Smartphone app (Apple iOS)
Somfy Telis RTS
Somfy wind and sun sensors
KNX home bus system
VIBRADORM radio remote controls
A maximum of 8 Smartphones or Vibradorm handheld transmitters can be taught-in.
3 Operation with a smartphone-app
3.1 Pairing with the Radius smartphone-app
The Radius app can be downloaded free of charge from the Apple Store under Radius
Control.
When using the app for the first time or resetting it, you can proceed step by step using the
menu navigation.
Click «CONTINUE»
This remote control is included in the scope of
delivery. Press the green button to use it later.
Follow the instructions on the
screen and connect the
controller to 230 VAC.
Each controller is delivered with a unique
name. Select the one to be connected. This is
displayed as soon as the connection is
established.
If the installation is only for one fan, press X. The
green tick should only be pressed if more than
one is to be installed at the same time. The
operating screen then appears.

O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s ten_v01.docx S e i t e 6v o n 9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
3.2 Opening and closing the fan
The fan awning can be easily moved to the desired position via the start screen on the app.
a. rotating
b. fan- in and -out
c. tilting
3.3 Favorite
Via "Settings" you can access the expert mode, among others. This mode is
password protected and must NOT be used
The fan moves in this direction as long as the button is
pressed. During commissioning, the zero and maximum
positions were set so that the fan remains limited in its
movements.
Using the memory buttons M1-M4, positions can be
approached automatically (press button for approx. 1
second). If you want to stop this automatic movement,
simply press the Memory button again.
Further options can be selected using the function keys in
the lower menu bar.
a.
b.
c.
Midday position and parking position are permanently
stored positions which are determined by the qualified
personnel during commissioning.
Memory positions 1 - 4 can be assigned individually by
moving to the desired position. Then press the M key and
the desired memory positions. The fan then moves
automatically from one position to the other by pressing
these keys.
The different M positions can be renamed with the pencil
symbol.

O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s ten_v01.docx S e i t e 7v o n 9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
3.4 Additional information
By selecting the "add" button on the control menu, another Radius fan can be selected by
standing near this fan to ensure a strong radio connection (indicated by the green bars).
If a fan cannot be added using the Add button, the app must be reset and the pairing has to
be performed again as described above.
If this does not work in exceptional cases, the controller must be set current-free for about
20 seconds and the pairing process must be carried out afterwards.
If a further fan is added, the others must be disconnected from the power supply (current-
free switching/unplugging). Only the newly programmed sun protection may be connected
to the mains! Otherwise, you risk a malfunction of the fans that are already in operation.
4 Operation with a radio handled transmitter
The keys M1 - M3 are memory keys and any position can
be defined and then moved to automatically as with the
iOS app. Move to the desired position and press the
Memory button 3 times and then the desired memory
position M1-M3.
Use the button to move the fan to the park position
and the button to the midday position.
The fan can be moved manually using the other symbol
function keys.
After a power failure, the handheld transmitter is in teach-
in mode for 2 minutes. It is only ready for operation again
after these 2 minutes.
Additional fans can be connected during
installation in the menu sequence
"Connect to another sunscreen? "menu
sequence by pressing the green ok button
or by repeating the coupling procedure
described above.

O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s ten_v01.docx S e i t e 8v o n 9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
5 Operation with SOMFY Telis RTS
A connected sun and wind sensor can automatically move the fan to the stored midday and
parking position. These positions can also be approached via the Somfy handheld
transmitter by pressing the up and down button. This signal is present at the control unit
until it is replaced by the Somfy signal in the opposite direction, then it is present again.
If the fan is now moved to the middy or park position with the app or the remote control after
the Somfy control was active, the Somfy signal remains present for the control memory.
This means that if, for example, the fan automatically fans out in the sun and is then moved
to the park position by the app, it cannot be opened with the control, because for the
control's memory the fan is already open. To avoid this, you must first press the arrow key
on the somfy remote control in the opposite direction and only then can you open it with the
remote control.
If the fan is opened with the Smartphone App or the Vibradorm handheld transmitter, this
information is not known to the sun and wind monitoring system. If the solar radiation is not
sufficient in such a situation, then the stored position of the fan is "closed" for the sun and
wind monitor system! This means that the system would not close automatically when
the wind comes up, because the position for the system is already "closed.
It must therefore be ensured that when the fan is connected to a sun and wind sensor
system, the Somfy Telis RT arrow key is always pressed downwards when the fan is
opened with the Smartphone App or the Vibradorm remote control.
If the system has been opened with the Somfy remote control or automatically with the wind
and sun sensor, it is no longer possible to move with the Radius App or Vibradorm remote
control for the next 4 minutes. This can be avoided by briefly pressing the stop button (my).
In case of changeable weather and/or gusty wind, the automatic sun protection system
must be switched off and the fan must be retracted. This prevents the fan from being
continuously retracted and extended without great benefit.This is also provided for in our
risk analysis.
Recommendation:
Recommendation: If a sun/wind monitor or a KNX bus system is used, it is recommended
that the midday and parking position is approached by these systems.
Fan moves to midday position (button up)
Motion is stopped
Fan moves into parking position (button down)
By keeping this key pressed, the sun monitor can be switched on and off.
This is then visible by the red LEDs "off" and "on".

O p e r a t i n g i n s t r u c t i o n s - B e l a l a t u s ten_v01.docx S e i t e 9v o n 9
Operating instructions Radius belalatus® ten fan-
shaped awning
for end users
6 Troubleshooting
In case of an unexpected error, please follow the instructions below:
If the fan sail no longer reacts and you do not receive a display message on your
smartphone, then disconnect the system from the mains for approx. 15 seconds and
then switch the mains voltage on again.
Procedure for the following status information on the display:
Duty cycle reached:
Wait about 18 minutes.
Initialization necessary:
proceed according to initialization
G Driver overloaded:
Disconnect the system from the mains for approx. 15 seconds and reconnect it to
the mains.
Error Pulse direction wrong:
Disconnect the system from the mains for approx. 15 seconds and reconnect it to
the mains. If it still does not work, the Radius installer should be notified for
rectification.
If the current fails while the control inputs are active, it cannot be excluded that an
initialization must be done. For this purpose, the following procedure can be carried out
via the radio remote control (without app):
Press the "M" key 11 times in succession to activate the service mode. If no further
key is pressed, the control unit automatically switches off the service mode after 10
seconds.
In service mode, the following functions are now available via the radio handheld
transmitter:
a) 3 x "M" followed by "fan out" (fan opens) Initialisation force is switched off
b) 3 x 'M' followed by 'M1 Virtual limit switches are switched off
c) 3 x "M" followed by "M3" current position of all drives is stored as zero position