RADLEY 1262-801 User manual
JD3764U
3042597
7.5A 3 X 21"
BL SNE
OWNER’S MANUAL
3 Year Limited Warranty on tool
1
POC SEFCTOS
PRODUCT NAME NA1150000
Rating 120V, 60Hz, AC
Amperes 7.5 A
Sanding belt speed
Sanding belt size 3 x 21"
Weight
NEED ASSISTANCE?
•
•
•
1262-801
7.5A 3 X 21" BELT SANDER
2
TBE F CNET
........................................................................................................... 1
................................................................................................................... 2
....................................................................................................... 3
............................................................................................................. 6
........................................................................................... 7
...................................................................................................................................
..........................................................................................................
.................................................................................................... 10
.......................................................................... 10
.................................................................... 10
....................................................................................................... 11
...................................................................................................... 11
..................................................................................12
....................................................................................13
.................................................................................................13
....................................................................................................13
........................................................
..................................................................................................15
...........................................................................15
..........................................................................................................................16
....................................................................................................................... 17
............................................................................................................................
................................................................................................................................20
3
GNRL SFT ANNS
WARNING:
EYE, EAR & LUNG PROTECTION
SYMBOL MEANING
ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA
Z94.3 or ANSI SAFETY STANDARD Z87.1
Non-compliant eyewear can cause serious injury if broken during
the operation of a power tool.
Use hearing protection, particularly during extended periods of
operation of the tool, or if the operation is noisy.
WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN
OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT.
•
•
•
To avoid electrical hazards, fire hazards or damage to the tool,
use proper circuit protection.
1262-801
7.5A 3 X 21" BELT SANDER
4
WARNING:
WORK AREA SAFETY
ELECTRICAL SAFETY
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication.
Use personal protective equipment. Always wear eye protection.
Prevent unintentional starting. Ensure the switch is in the o position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Remove any adjusting key or wrench before turning the power tool on.
Do not overreach. Keep proper footing and balance at all times.
5
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts.
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your application.
Do not use the power tool if the switch does not turn it on and o.
Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may aect the power tool’s operation. If damaged,
have the power tool repaired before use.
Keep cutting tools sharp and clean.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed.
Hold power tools by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord.
Use clamps or another practical way to secure and support the workpiece to a stable
platform.
SERVICE
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
1262-801
7.5A 3 X 21" BELT SANDER
6
SEFC SFT US
WARNING: Know your belt sander. Read the Owner’s Manual carefully. Learn the
tool’s applications and limitations, as well as the specific potential hazards related to
this tool.
WARNING: Wearing glasses or goggles that do not comply with ANSI Z87.1
could cause serious injury if they break.
DANGER: Always unplug the tool from the power source before
changing the sanding belt or cleaning the tool.
DANGER: Never place hands or fingers near the sanding belt while
the tool is running. Severe injury will result.
WARNING:
WARNING:
the sanding belt.
7
ETNIN CR SFT
Make sure your extension cord is the proper size.
Be sure your extension cord is properly wired and in good condition.
Use a separate electrical circuit for your power tools.
WARNING:
Repair or replace damaged or worn extension cords immediately.
Select the appropriate extension cord gauge
When operating a power tool outdoors, use an outdoor extension cord
marked “WA” or “W”.
WARNING:
Keep the extension cord clear of the working area. Position the cord so it will
not get caught on the workpiece, tools or any other obstructions while you are
working with the power tool.
MINIMUM GAUGE (AWG)
Amperage rating Total length
than
than
0 6 16 16
6 10 16 12
10 12 16 16 12
12 16 12
1262-801
7.5A 3 X 21" BELT SANDER
8
WARNING: Some of the following symbols may appear on the sander. Study these
symbols and learn their meaning. Proper interpretation of these symbols will allow for
VVolts n
~
Three-phase alternating
current with neutral
AAmperes Direct current
Hz Hertz noNo load speed
WWatts Alternating or direct
current
kW Kilowatts Class II construction
Microfarads Splash-proof construction
LLitres Watertight construction
kg Kilograms Protective grounding at
terminal, Class I tools
HHours .../min Revolutions or
reciprocations per minute
N/cm² Newtons per square
centimetre Diameter
Pa Pascals 0
OPM Oscillation per minute Directional arrow
Min Minutes Warning symbol
SSeconds Wear your safety glasses
~or AC Alternating current Wear a dust mask
~
Three-phase
alternating current Wear hearing protection
3042597
JD3764U
This symbol designates that this tool is listed with U.S. requirements by
ETL Testing Laboratories, Inc.
UL62841-1，UL62841-2-4;
CSA C22.2#62841-1，CSA C22.2#62841-2-4.
9
1. Adjustable front handle
2. Clamping holes
3. Speed control wheel
4. Trigger switch lock-on button
5. Rear handle
6. Vacuum port
7. Dust box
8. Motor vents
9. Belt tension release lever on opposite side of base
10. Belt tracking knob
11. Hinged sanding belt cover
12. Adjustable handle latch
13. Clamps
14
235
6
7
8
9
10
12
11
13
1262-801
7.5A 3 X 21" BELT SANDER
10
ASML AD ETN
INSTALLING THE DUST BOX OR ATTACHING A VACUUM HOSE
NOTE:
DANGER: Never use the dust box or vacuum when sanding metal.
Sparks could ignite the collected dust.
EMPTYING THE DUST BOX
NOTE:
DANGER: If you use compressed air to blow the dust out of the dust box you
MUST wear safety goggles to prevent any dust from injuring your eyes.
ON/OFF TRIGGER SWITCH AND LOCKON BUTTON
11
3
2
1
VARIABLE SPEED CONTROL
CHANGING A SANDING BELT
•
•
•
2
3
5
6
1
WARNING:
1262-801
7.5A 3 X 21" BELT SANDER
12
NOTE:
NOTES:
ADJUSTING THE SANDING BELT TRACKING
2
2
1
NOTES:
13
SELECTING THE CORRECT SANDING BELT
• • •
WARNING: For safety reasons, the operator must read the sections of this Owner’s Manual
entitled "GENERAL SAFETY WARNINGS", "POWER TOOL SAFETY", "SPECIFIC SAFETY RULES",
"GUIDELINES FOR EXTENSION CORDS" and "SYMBOLS" before using this belt sander.
Verify the following every time the belt sander is used:
1. Safety glasses, safety goggles, or face shield is being worn.
2. Hearing protection and dust mask are being worn.
3. The sanding belt is in good condition and is the correct type for the workpiece.
4. The sanding belt is tracking in the centre of the rollers.
5. The power cord is clear of the sanding belt path.
6. The workpiece is clear of any foreign materials such as nails.
Failure to observe these safety rules will significantly increase the risk of injury.
ADJUSTING THE FRONT HANDLE
NOTE:
1
2
GENERAL PURPOSE SANDING
WARNING:
WARNING:
1262-801
7.5A 3 X 21" BELT SANDER
14
NOTE:
NOTES:
NOTE:
SANDING ROUGH WOOD SURFACES OR REMOVING PAINT
NOTES:
15
SANDING CONCAVE SURFACES
NOTE:
USING THE SANDER AS A STATIONARY BELT SANDER
13
2
1262-801
7.5A 3 X 21" BELT SANDER
16
MITNNE
WARNING:
WARNING:
WARNING:
LUBRICATION
17
EPDD VE
1
2
3
5
6
7
10
11
16
17
20
21
22
23
25
26
27
15
1312
1
35 36
37
33
32
30
31
57
60
61
70
67
66
65
71
63
62
72 73 75
56
55
53
52
51
50
1262-801
7.5A 3 X 21" BELT SANDER
18
PRS LS
WARNING:
belt sander.
1 2030010067 1
2 3
3 1
2
5 1
6 1
7 1
2020160033 1
2
10 6
11 3011320001 1
12 Snap ring 6mm 1
13 1
Pin ø5x76 1
15 1
16 1
17 1
2030020367 1
1
20
21 1
22 2030020200 1
23 1
2020230001 1
25 2
26 1
19
27 3120060070 1
2050050056 1
1
30 1
31 1
32 1
33 2030020123 1
1
35 1
36 1250010003 1
37 12
2030050002 1
1
1
1230030025 2
2050020027 2
2
1130010266 1
1
1
2030020267 1
2050060263 Spring 1
50 3120100060 1
51 2
52 1
53 1
1
55 3150230010 1
56 1
57
1
3150030023 1
60 2020160032 1
61 3150160256 1
Table of contents
Other RADLEY Sander manuals
Popular Sander manuals by other brands
Ingersoll-Rand
Ingersoll-Rand 317-B Product information
Ryobi
Ryobi ROS300A Original instructions
Dynabrade
Dynabrade 48520 Safety, operation and maintenance
HSS Hire
HSS Hire 878 Operating & safety guide
Flex
Flex PE 14-2 150 Original operating instructions
Festool
Festool ROTEX RO 150 FEQ Original operating manual