RADLEY Random Orbit Sander User manual
5”
1262-171
Onr’s
Mna
READ ALL INSTRUCTIONS BEFORE FIRST USE.
KEEP THIS MANUAL FOR FUTURE REFERENCE.
KEEP AWAY FROM CHILDREN.
WEAR A
FACE MASK
WEAR EAR
PROTECTION
WEAR CSA APPROVED
EYE PROTECTION
120V • 60Hz • 2 Amp
LISTED
3042597
JD2522U
1
5" Rno ri sne - Onr's Mna
PRODUCT SPECIFICATIONS
Rating: 120V, 60Hz, AC
Amperes: 2.0 AMP
No load speed: 12,000 OPM
Disc diameter: 5"
Weight: 3 lb. 6 oz (1.53 kg)
Need Assistance?
Call us on our toll free customer support line:
• Technical questions
• Replacement parts
• Parts missing from package
Technical questions
Replacement parts
Parts missing from package
2
1262-171
TABLE OF CONTENTS
Table of contents
Service
Installing a sanding disc
Cleaning the dust bag
Sanding disc selection
Sanding
Maintenance
Parts listing
………….……………………………………………………………1
………….……………………………………………………………2
………….……………………………………………………………3
………….……………………………………………………………3
………….……………………………………………………………5
………………….…………………………………………………….6
………….……………………………………………………………6
………….……………………………………………………………7
………….……………………………………………………………10
………….……………………………………………………………11
………………………………………………11
……….……………………………………………………………11
………….……………………………………………………………12
………….……………………………………………………………12
……….……………………………………………………………13
………….…………………………………………………………….15
………….……………………………………………………………16
………….……………………………………………………………17
3
5" Rno ri sne - Onr's Mna
GENERAL SAFETY WARNINGS
WARNING:
precautions, safeguards and instructions appearing in this manual are not
meant to cover all possible situations. It must be understood that common
This instruction manual includes the following:
EYE, EAR & LUNG PROTECTION
ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA
REQUIREMENTS or ANSI SAFETY STANDARD Z87.1
WARNING: Non-compliant
ALWAYS WEAR EAR PROTECTION
WARNING:
WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN OPERATING A
POWER TOOL IN A DUSTY ENVIRONMENT.
WARNING:
microscopic particles.
•
•
•
•Operation
•Maintenance
•Accessories
WEAR A
FACE MASK
WEAR EAR
PROTECTION
WEAR CSA APPROVED
EYE PROTECTION
1262-171
ELECTRICAL SAFETY
WARNING:
use proper circuit protection.
POWER TOOL SAFETY
WARNING: Read all safety warnings and instructions
Save all warnings and instructions for future reference.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust.
ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions
•Operation
•Maintenance
•Accessories
WEAR A
FACE MASK
5
5" Rno ri sne - Onr's Mna
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
Do not expose power tools to rain or wet conditions.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of a ground fault circuit inter-
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication.
Use personal protective equipment. Always wear eye protection. Protective
Prevent unintentional starting. Ensure the switch is in the o-position before
connecting to power source and/or battery pack, picking up or carrying the
tool.
Remove any adjusting key or wrench before turning the power tool on. A
6
1262-171
Do not overreach. Keep proper footing and balance at all times. This enables
Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your application.
Do not use the power tool if the switch does not turn it on and o
be repaired.
Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may aect the power tool’s
operation. If damaged, have the power tool repaired before use.
Keep cutting tools sharp and clean.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to
be performed.
intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
7
5" Rno ri sne - Onr's Mna
SPECIFIC SAFETY RULES
WARNING: Know your orbit sander. Do not plug the tool into the power
source until you have read and understand this Instruction Manual. Learn
the tool’s applications and limitations, as well as the specific potential
hazards related to this tool.
WARNING:
WARNING:
WARNING:
extended periods of operation.
WARNING:
be sanded.
the sanding pad.
WEAR CSA
APPROVED
EYE PROTECTION
1262-171
GUIDELINES FOR EXENSION CORDS
WARNING: Keep the extension cord clear of the working area. Position the
nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the
gauge number the heavier the cord.
WARNING: Repair or replace damaged or worn extension cords immediately.
WARNING: Keep the extension cord clear of the working area. Position the
cord so it will not get caught on the workpiece, tools or any other obstructions
while you are working with the power tool.
5" Rno ri sne - Onr's Mna
V Volts
A Amperes
Hz Hertz
W Watts
kW s
Microfarads
kg Kilograms
H Hours
N/cm2
centimeter
Pa Pascals
OPM Oscillations per minut e
Min Minutes
S Seconds
or a.c. Alternatingcurrent
Three-phase alternating
current
Three-phase alternating
Direct current
No load speed
Alternating or direct
current
Class II construction
Splash-proof
construction
Watertight
construction
Protective grounding at
grounding
termin
al,
Class I tools
Revolutions or
reciprocations per
minute
Diameter
Arro
Warn
glasses
SYMBOLS
WARNING:
LISTED
3042597
JD2522U
10
1262-171
KNOW YOUR RANDOM ORBIT SANDER
Dust Bag
Assemb
Palm Grip
le-Hook
and op
sanding base
Motor vents
Hook loop
fastening stem
Motor vents
3 x Hook rs
11
5" Rno ri sne - Onr's Mna
ASSEMBLY AND OPERATING
NOTE: The drawings in the assembly and
operating section of this manual may dier
slightly from the tool you purchased.
INSTALLING A SANDING DISC
NOTES:
a) Place the sanding disc so the holes in the
loop pad.
ON/OFF SWITCH
CONNECTING THE DUST BAG ASSEMBLY TO
THE SANDER
1. Slide the dust bag connector (1) into the dust
NOTE:
2. When the dust bag connector is pressed
bag onto the sander.
Fig.2
12
1262-171
ASSEMBLY AND OPERATING
CLEANING THE DUST BAG
SANDING DISC SELECTION
•Have a diameter of 5"
•
hole pattern in the sander base
•
garnet are too soft for economical use in
operations. The condition of the surface to be
NOTE:
and sand until the surface is uniform. Medium
Fig.5
13
5" Rno ri sne - Onr's Mna
ASSEMBLY AND OPERATING
SANDING
if possible.
WARNING:
complete sanding disc surface is in contact
pressing on the left-hand side of the ON/
the random orbital motion of the sanding disc
Upon completion of the sanding operation, turn
disc comes to a complete stop before removing
WARNING:
this sanding procedure could result in a loose
CLEAN THE DUST BAG OFTEN
NOTE: Hold the sander with one
hand on the hand grip (1) on top of
the sander (Fig. 7). Be careful NOT to
cover the cooling vents (2) with your
hand. Covering the cooling vents could
cause the motor to be damaged by
overheating.
DO NOT FORCE THE SANDER.
remove too much material, making the surface uneven.
before continuing the sanding operation.
Fig. 6
1262-171
MAINTENANCE
GENERAL
WARNING:
create a hazard or cause product damage.
DO NOT
remove dirt, dust, oil, grease etc.
WARNING:
DO NOT
WARNING:
WARNING:
LUBRICATION
life of the unit under normal conditions. Therefore, no further lubrication is required.
15
5" Rno ri sne - Onr's Mna
EXPLODED VIEW
NOTE:
16
1262-171
PARTS LIST
WARNING:
Always order by PART NUMBER, not by key number.
17
5" Rno ri sne - Onr's Mna
WARRANTY
RADLEY RANDOM ORBIT SANDER WARRANTY
1262-171
MADE IN CHINA / FABRIQUÉ EN CHINE
HOME HARDWARE STORES LIMITED
ST. JACOBS, ONTARIO N0B 2N0
ORDER ONLINE / COMMANDE EN LIGNE
EXCLUSIVE TO HOME HARDWARE
For information on the entire line-up of Radley power
tools visit homehardware.ca or your local Home Hardware retail store.
© 07 / 2019 Home Hardware Stores Limited
5”
120V • 60Hz • 2 Amp
Table of contents
Other RADLEY Sander manuals
