RaidSonic Icy Box IB-PCI1901-C32 User manual

Manual IB-PCI1901-C32
USB Type-C™PCIe Controller Card
Handbuch IB-PCI1901-C32
USB Type-C™PCIe Controller Karte

Sicherheitshinweise IB-PCI1901-C32
Zur Vermeidung körperlicher Schäden, sowie von Sach-, Geräteschäden und Datenverlust beach-
ten Sie bitte folgende Hinweise:
Warnstufen
Signalwort und Sicherheitszeichen kennzeichnen die Warnstufe und geben einen sofortigen Hinweis auf Wahr-
scheinlichkeit, Art und Schwere der Folgen, wenn die Maßnahmen zur Vermeidung der Gefahr nicht befolgt werden.
warnt vor einer unmittelbar gefährlichen Situation, die zum Tod oder zu schweren Ver-
letzungen führen wird.
warnt vor einer möglicherweise gefährlichen Situation, die zum Tod oder zu schweren
Verletzungen führen kann.
warnt vor einer möglicherweise gefährlichen Situation, die zu leichten Verletzungen
führen kann.
warnt vor einer möglichen Situation, die zu Sach- und Umweltschäden führen und den
Betriebsablauf stören kann.
1. Gefahren durch elektrische Spannung
Kontakt mit elektrisch leitenden Teilen
Lebensgefahr durch Stromschlag
• vor Benutzung Betriebsanleitung lesen
• vor Arbeiten am Gerät, Spannungsfreiheit sicherstellen
• Kontaktschutzblenden nicht entfernen
• Kontakt mit Spannungsführenden Komponenten vermeiden.
• Steckkontakte nicht mit spitzen und metallischen Gegenständen berühren
• Verwendung nur in dafür vorgesehenen Umgebungen
• Gerät ausschließlich mit Typenschildkonformen Netzteil betreiben!
• Gerät/Netzteil fern von Feuchtigkeit, Flüssigkeit, Dampf und Staub halten
• Eigenständige Modifikationen sind unzulässig
• Gerät nicht während eines Gewitters anschließen
• Geben Sie Ihr Gerät im Reparaturfall in den Fachhandel
GEFAHR
WARNUNG
VORSICHT
ACHTUNG
WARNUNG

Sicherheitshinweise IB-PCI1901-C32
Sicherheitshinweise IB-PCI1901-C32
2. Gefahren während Montage (wenn vorgesehen)
Scharfkantige Bauteile
Finger- oder Handverletzungen bei Zusammenbau (wenn vorgesehen) möglich
• vor Montage, Betriebsanleitung lesen
• Kontakt mit scharfen Kanten oder spitzen Bauteilen vermeiden
• Bauteile nicht mit Gewalt zusammensetzen
• geeignetes Werkzeug verwenden
• nur gegebenenfalls mitgeliefertes Zubehör und Werkzeug verwenden
3. Gefahren durch Wärmeentwicklung
Mangelhafte Belüftung des Geräts/Netzteils
Überhitzung und Ausfall des Geräts/Netzteils
• externe Erwärmung vermeiden und Luftaustausch zulassen
• Lüfter-Auslass und passive Kühlkörper freihalten
• direkte Sonneneinstrahlung auf Gerät/Netzteil vermeiden
• ausreichend Umgebungsluft für Gerät/Netzteil sicherstellen
• keine Gegenstände auf dem Gerät/Netzteil abstellen
4. Gefahren durch Kleinstteile und Verpackung
Erstickungsgefahr
Lebensgefahr durch Ersticken oder Verschlucken
• Kleinteile, Zubehör für Kinder unzugänglich verwahren
• Plastiktüten und Verpackung für Kinder unzugänglich verwahren/entsorgen
• Kleinteile und Verpackungen nicht in Kinderhände geben
5. Möglicher Datenverlust
Datenverlust bei Inbetriebnahme
Unwiederbringlicher Datenverlust möglich
• Unbedingt Hinweise in der Bedienungsanleitung/Schnellinstallationsanleitung beachten
• Produkt nur verwenden, wenn Spezifikationen erfüllt sind
• Datensicherung vor Inbetriebnahme durchführen
• Datensicherung vor Anschluss neuer Hardware durchführen
• dem Produkt beiliegendes Zubehör verwenden
VORSICHT
ACHTUNG
WARNUNG
ACHTUNG

Safety information IB-PCI1901-C32Sicherheitshinweise IB-PCI1901-C32
6. Reinigung des Gerätes
Schädigende Reinigungsmittel
Kratzer, Farbveränderungen, Feuchteschäden oder Kurzschluss am Gerät
• vor Reinigung, das Gerät außer Betrieb nehmen
• aggressive bzw. scharfe Reinigungs- und Lösungsmittel sind ungeeignet
• nach der Reinigung sicherstellen, dass keine Restfeuchtigkeit vorhanden ist
• Reinigung der Geräte am besten mit trockenem Antistatiktuch durchführen
7. Entsorgung des Gerätes
Umweltverschmutzung, Wiederverwertung nicht möglich
Mögliche Umweltbelastung durch Bestandteile, Recyclingkreislauf unterbrochen
Dieses auf dem Produkt und der Verpackung angebrachte Symbol zeigt an, dass dieses
Produkt nicht mit dem Hausmüll entsorgt werden darf. In Übereinstimmung mit der Richtlinie über Elek-
tro- und Elektronik-Altgeräte (WEEE) darf dieses Elektrogerät und ggf. enthaltene Batterien nicht im
normalen Hausmüll oder dem Gelben Sack entsorgt werden. Wenn Sie dieses Produkt und ggf. ent-
haltene Batterien entsorgen möchten, bringen Sie diese bitte zur Verkaufsstelle zurück oder zum Recy-
cling-Sammelpunkt Ihrer Gemeinde.
Bei Fragen kontaktieren Sie gerne unseren Support unter
ACHTUNG
ACHTUNG

Safety information IB-PCI1901-C32
Safety information IB-PCI1901-C32Sicherheitshinweise IB-PCI1901-C32
Please read carefully the following information to prevent injuries, damage to material and device
as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms of the
probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards
are not complied with.
Warns of a directly hazardous situation causing death or serious injury.
Warns of a potentially hazardous situation that may cause death or serious injury.
Warns of a potentially hazardous situation that may cause minor injury.
Warns of a potential situation that may cause material or environmental damage and
disrupt operative processes.
1. Risk of electrical shock
Contact with parts conducting electricity
Risk of death by electrical shock
• Read the operating instructions prior to use
• Make sure the device has been de-energised prior to working on it
• Do not remove contact protection panels
• Avoid contact with conducting parts
• Do not bring plug contacts in contact with pointed and metal objects
• Use in intended environments only
• Operate the device using a power unit meeting the specifications of the type plate only!
• Keep the device/power unit away from humidity, liquid, vapour and dust
• Do not modify the device
• Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs
DANGER
WARNING
CAUTION
IMPORTANT
WARNING

Safety information IB-PCI1901-C32
2. Hazards during assembly (if intended)
Sharp components
Potential injuries to fingers or hands during assembly (if intended)
• Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed components
• Do not force components together
• Use suitable tools
• Use potentially enclosed accessories and tools only
3. Hazards caused by a development of heat
Insufficient device/power unit ventilation
Overheating and failure of the device/power unit
• Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
• Avoid direct sunlight on the device/power unit
• Guarantee sufficient ambient air for the device/power unit
• Do not place objects on the device/power unit
4. Hazards caused by very small parts and packaging
Risk of suffocation
Risk of death by suffocation or swallowing
• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
• Do not hand over small parts and packaging to children
5. Potential data lossData lost during commissioning
Potentially irreversible data loss
• Always comply with the information in the operating instructions/quick installation guide
• Exclusively use the product once the specifications have been met
• Back up data prior to commissioning
• Back up data prior to connecting new hardware
• Use accessories enclosed with the product
CAUTION
IMPORTANT
WARNING
IMPORTANT

Safety information IB-PCI1901-C32
Safety information IB-PCI1901-C32
6. Cleaning the device
Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short circuit in the device
• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
• Make sure there is no residual moisture after cleaning
• We recommend cleaning devices using a dry, anti-static cloth
7. Disposing of the device
Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle interrupted
This icon on product and packaging indicates that this product must not be disposed of as
part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive
(WEEE) this electrical device and potentially included batteries must not be disposed of in conventional,
domestic waste or recycling waste. If you would like to dispose of this product and potentially includ-
ed batteries, please return it to the retailer or your local waste disposal and recycling point.
If you have any questions, please do not hesitate to contact our support at
IMPORTANT
IMPORTANT

Manual IB-PCI1901-C32
Dear Customer,
thank you for choosing an ICY BOX®product.
Product overview
1. High-profile bracket
2. Blue LED indicates power
3. USB 3.2 (Gen 2x2) Type-C™port
4. Blue LED - indicates connection
5. PCI Express Generation 3.0 x4 lanes interface
6. 15 pin SATA power interface
Packing content:
1x IB-PCI1901-C32
1x Additional low-profile bracket
1x Manual
1 2 3 4 5 6

Manual IB-PCI1901-C32
Key features
• Expands your desktop PC to one more USB Type-C™3.2 (Gen 2x2) port
• Supports USB data transfer rates with up to 20 Gbit/s
• PCI express base specification revision 3.0 (x4 lanes)
• Fits in PCIe x4, x8 or x16 slot
• Asmedia ASM3242 and ASM1541 USB 3.2 (Gen 2x2) controllers
• LED indicators show power and connection
System Requirements:
• Windows®
• One available x4, x8 or x16 PCI Express slot. (PCI Express Gen. 3.0 x4 lanes at least)
• Power supply with one free SATA 15 pin power plug
Note:
The IB-PCI1901-C32 adopts the PCIe Gen 3.0 x4 (32 Gbit/s) interface connector design. In order to get
USB 3.2 (Gen 2x2) performance, please use a PCIe slot based on PCI Express Generation 3.0 x4 lanes for card
installation.
However, some PC systems do not support PCIe Gen 3.0 specification, so that IB-PCI1901-C32 cannot support
full-power performances (20 Gbit/s). Please double-check your PC system for system detail information or only
get lower data transfer rates.

Manual IB-PCI1901-C32
Installation
Important: During PCIe card assembly all cabling has to be disconnected from the computer. It may cause electric
shock accident or malfunction. When installing the PCIe card please note the electrostatic! Body‘s static electricity
may cause malfunction of the device. Please touch a metal object to discharge or wear antistatic gloves before the
operation.
Attention!
- The PCB of this device is a precision machinery, please be careful do not collision and please notice the right
direction during installation.
- Be careful the cutting edge inside may cut hand!
Follow the instruction given below to install the PCI Express
card:
• Turn your computer off and remove the power plug
from the plug socket.
• Remove the cover from the computer case.
• Identify an empty PCIe 3.0 x4 slot and remove the as-
sociated metal bay cover on the back of the computer
by unscrewing it.
• Gently insert the card into the free PCI Express slot
• Secure the card in place by screwing the metal bay
screw, which you removed in the previous step, back
into place.

Manual IB-PCI1901-C32
• Carefully plug a SATA power cable (from PC’s power supply) to the add-on card’s SATA power port.
Pay attention to the correct alignment of the SATA plug.
• Place the cover back to the computer.
• Insert the power plug into the plug socket and start your computer
• Connect a supported USB 3.2 (Gen 2x2) enclosure, like the IB-1916M-C32 via USB Type-C™cable to the
USB Type-C™port of the IB-PCI1901-C32.
• When the external enclosure has been plugged correctly the corresponding LED at the back panel of the
PCI card will turn on blue!
Note!
The full USB 3.2 (Gen 2x2) transfer rate can only be achieved with a compatible USB 3.2 (Gen 2x2) external
enclosure. Furthermore, the USB 3.2 drivers must be installed by the operating system. If this is not the case, install
the appropriate drivers for your operating system (Windows®).

Handbuch IB-PCI1901-C32
Sehr geehrter Kunde,
vielen Dank, dass Sie sich für ein ICY BOX®Produkt entschieden haben.
Produktübersicht
1. High-Profile Slotblende
2. Blaue LED für Betrieb
3. USB 3.2 (Gen 2x2) Type-C™Schnittstelle
4. Blaue LED für Verbindung
5. PCI Express Generation 3.0 x4 Lanes Schnittstelle
6. 15 Pin SATA Stromanschluss
Verpackungsinhalt:
1x IB-PCI1901-C32
1x Zusätzliche Low-Profile Slotblende
1x Handbuch
1 2 3 4 5 6

Handbuch IB-PCI1901-C32
Handbuch IB-PCI1901-C32
Hauptmerkmale
• Erweitert Ihren PC um einen externen USB Type-C™3.2 (Gen 2x2) Anschluss
• Unterstützt USB Datenübertragungsraten bis zu 20 Gbit/s
• PCI Express Base Spezifikation Revision 3.0 (x4 Lanes)
• Passt in PCIe x4, x8 oder x16 Steckplatz
• Asmedia ASM1541 und ASM3242 USB 3.2 (Gen 2x2) Controller
• Blaue LEDs zeigen Betrieb und Anschluss an
Systemvoraussetzungen:
• Windows®
• Ein verfügbarer x4, x8 oder x16 PCI Express Steckplatz. (mindestens PCI Express Gen. 3.0 x4 Lanes)
• Netzteil mit einem freien SATA 15 Pin Stromstecker
Hinweis:
Die IB-PCI1901-C32 verwendet das PCIe Gen 3.0 x4 (32 Gbit/s) Schnittstellendesign. Um USB 3.2 (Gen 2x2)
Leistungen zu erzielen, verwenden Sie bitte einen PCIe Steckplatz, der auf der PCI Express Generation 3.0 x4
Lanes basiert.
Einige PC-Systeme unterstützen die PCIe Gen. 3.0 Spezifikation nicht, so dass die IB-PCI1901-C32 nicht die volle
Leistung von bis zu 20 Gbit/s unterstützen würde. Bitte überprüfen Sie Ihr PC-System auf diese System-Detailinfor-
mationen hin, ansonsten erzielen Sie nur niedrigere Datenübertragungsraten.

Handbuch IB-PCI1901-C32
Einbau
Hinweis: Um Schäden oder Fehlfunktionen zu vermeiden, müssen während der Installation der PCIe Karte alle
stromzuführenden Kabel am Computer entfernt werden. Beim Einsetzen der PCIe Karte achten Sie auf mögliche
elektrostatische Entladung, da diese zu Schäden oder Fehlfunktionen führen kann. Berühren Sie vor der Installation
ein „geerdetes“ Metallobjekt oder tragen antistatische Handschuhe.
Achtung!
- Die PCB ist eine sehr empfindliche Komponente. Setzen Sie die PCIe Karte bitte vorsichtig ein und achten auf die
richtige Ausrichtung.
- Gehen Sie behutsam vor, da im Inneren des Gerätes scharfe Kanten vorhanden sind.
Bitte befolgen Sie die Einbauanweisungen wie folgt dar-
gestellt:
• Schalten Sie Ihren Computer und alle angeschlosse-
nen Geräte aus und entfernen das Stromkabel an der
Rückseite Ihres Computers.
• Entfernen Sie die entsprechende Gehäuseabdeckung.
• Identifizieren Sie einen leeren PCIe 3.0 x4-Steck-
platz und entfernen Sie die zugehörige Slotblende
auf der Rückseite des Computers, indem Sie diese
abschrauben.
• Setzen Sie die Karte vorsichtig in den freien PCI-Ex-
press-Steckplatz ein.
• Sichern Sie die PCIe Karte, indem Sie die Schraube,
die Sie im vorherigen Schritt entfernt haben, wieder an
ihren Platz schrauben.

Handbuch IB-PCI1901-C32
Handbuch IB-PCI1901-C32
• Stecken Sie vorsichtig ein SATA-Stromkabel (vom PC-Netzteil) an den SATA-Stromanschluss der Zusatzkarte
an. Achten Sie auf die korrekte Ausrichtung des SATA Steckers.
• Schließen Sie das Computergehäuse.
• Verbinden das Stromkabel und starten Ihren Computer wieder.
• Schließen Sie ein unterstütztes USB 3.2 (Gen 2x2) Gehäuse, wie z.B. die IB-1916M-C32 über ein USB
Type-C™-Kabel an den USB Type-C™-Port der IB-PCI1901-C32 an.
• Wenn das externe Gehäuse korrekt eingesteckt ist, leuchtet die entsprechende LED an der Rückseite der
PCI-Karte blau auf!
Hinweis
Die volle USB 3.2 (Gen 2x2) Transferrate kann nur mit einem angeschlossenen und kompatiblen
USB 3.2 (Gen 2x2) Gehäuse erreicht werden. Des Weiteren müssen die USB 3.2 Treiber seitens des Betriebs-
systems installiert sein. Sollte dies nicht der Fall sein, installieren Sie die passenden Treiber für Ihr Betriebssystem
(Windows®).
Informieren Sie sich hierzu bitte auf www.icybox.de.

© Copyright 2020 by RaidSonic Technology GmbH.
All Rights Reserved.
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes
no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes
in the specifications and/or design of the above mentioned product without prior notice. The diagrams contained in this
manual may also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic
Technology GmbH assumes no responsibility for any differences between the product mentioned in this manual and the
product you may have.
Table of contents
Languages: