R&M PRIME-3U-STU User manual

Installationsanleitung PRIME-3/4U-STU/SSU
Installation guide PRIME-3/4U-STU/SSU
Instructions de montage PRIME-3/4U-STU/SSU
A – Montage im PRIME-Gestell / Mounting in PRIME-cabinet
021.6059 / 021.6060
A1
021.6025 / 021.6026
A2
021.6027
«press & click»
A3
021.6028
Einsetzen / Mounting
Öffnen / Opening
«press & pull»
A4
021.6029
PRIME-SSUPRIME-STU

2
B – Kabelzuführung von der Seite / Cable feeding from the side
B1
021.6038
B2
021.6043 / 021.5332
Ø 5mm Schutzschlauch
Ø 5mm Protection tube
B3
12 3 4
4
021.5323 / 021.6044
1
C – Kabelaufteiler / Cable distribution
C1
021.6039 / 021.5329 / 021.5330
C2
021.5334
Ablängen Ø5mm Schutzschlauch
Cutting Ø5mm protection tube

3
C3
021.5335
C4
021.6030 / 021.5189
«press & pull»
C5
021.6041
C6
021.6040
C7
021.6042 / 021.6044
Einführen der Bündelader
Insert loose-tube
C4
021.6034 / 021.6028
«press & pull»

4
D1
021.6069 / 021.5381
D – Montage im 19" Gestell mit frontseitiger Befestigung / Mounting in 19" cabinet with front rail fixation
D2
021.6070 / 021.6044
4
1
1 2 3 4
D3 Einsetzen / Mounting D4
«press & click»
021.6071 021.6072
D5
021.6074 / 021.6028
Öffnen / Opening D6
021.6073
«press & pull»

5
D8
021.6077
021.6078
D7
021.6076
2x
Schutzschlauch montieren
Protection tube fixation
D9
021.6075

6
E – Bündelader und Fasereinführung / Loose-tube and fiber insertion
E2
021.6045
E3
021.6047
E1
021.6045
«click & stop»
E4
021.6048 / 023.0011
E5
021.6049 / 020.1630
E6
020.1650
2x
Band / Tape 1x

7
F1
021.6067 / 021.5367
F2
F – Clip Befestigung (optional) / Clip fixation (optional)
«click» «click»
G – Faser spleissen / Fiber splice
021.6068
G1
021.6051
G3
021.6053
G2
021.6052
4x
G4
021.6054

8
G5
021.6055
ANT G6
021.6056
ANT
4 1
G5
021.6057
HS G6
021.6058
HS
4 1
H – Spleisskassetten / Splice tray
H1
021.6061
Kassette einsetzen / Insert splice tray
1
2
2
«click»
H2
021.6062
Kassette lösen / Remove splice tray
1
2

9
H3
021.6063
Richtungwechsel in der Kassette /
Change of direction in the cassette
H4
021.6064
Beschriftung / Labeling
I – Fasereinlage / Fiber inlay
I1
021.6065
Faserführung A und B (Spleiss/Spleiss) /
Fiber routing A and B (Splice/Splice)
B
A
I2
021.6065
Richtungswechsel im der Fasereinlage /
Change of direction in the fiber inlay
I3
021.6066
Fasereingang von oben /
Fiber in from above
I4
021.6066
Richtungswechsel im Auskreuzbereich /
Change of direction in the crossover area

10
J – Splitter Befestigungspunkte / Splitter mounting points
J1
021.6063
Optionale Position für Splitter 250μm. Max. 1(2) x 8
Optional position for splitter 250μm. Max. 1(2) x 8
J2
021.6066
Optionale Position für Splitter 900μm. Max. 1(2) x 32
Optional position for splitter 900μm. Max. 1(2) x 32
Splitter
Splitter

11
K1
021.6031
K – Einsetzen / Mounting
K2
021.6032 / 021.6025
K3
021.6033
«click»
K4
021.6034 / 021.6028
Öffnen / Opening
«press & pull»
K5
021.6035
Patch Position / Patch position K6
021.6036 / 021.6079
Frontplatte lösen und anheben
Frontplate release and lift
1
2

Please note:
This guide shows the best practices for installation ONLY. R&M expressly disclaims all liability for any damage to material, equipment,
and for any injury or death. Legal health and safety regulations should have priority over best practices as shown in this guide. R&M
does not guarantee this guide to be free of errors. Products included may vary from products shown. Please exercise caution.
Headquarters
Switzerland
Reichle & De-Massari AG
Binzstrasse 32
CHE-8620 Wetzikon
Telephone HQ [phone]
Telefax HQ [phone]
E-Mail [email protected]
www.rdm.com
885733/A/08.2021
K7
021.6037
Vollauszug (Spleisspositon) /
Fully open position (Splice position)
K8
021.6030
«press & pull»
021.5189
Entfernen / Remove
L – Beschriftung / Labeling
L
021.6080