understanding the monıtor led dısplays
Front LED Display
The front LED display provides
information on the monitor status,
and will give the “green light” to
hit when the device is
ready to measure.
Rear LED Display
The rear LED display provides
information on connectivity and
battery. This display will be especially
important when pairing the app
with the monitor.
Monitor is switched on,
but not ready to measure.
red light ‘‘ not ready ’’
Monitor is ready for hitting. When
appearing after blue light just after a hit:
data is ready to be viewed on app,
and ready for next hit.
Monitor is processing data after a valid hit.
Wait for the green light to appear which
should take only a few seconds.
green light ‘‘ pıtch ’’
blue light ‘‘ processıng ’’
Not connected to RCE, waiting for USB sync.
red light
Successfully connected to RCE through USB.
green light
Warning for low battery, please recharge monitor.
red flashıng light
Switched off, and charging.
amber light
If USB is plugged into a charging device or PC,
it means the battery is fully charged.
off
5
