Rasha Penta Exterior V18 Profile User manual

Penta Exterior V18 Profile(Penta-E18
User Instructions
•RGBAW(5 in 1)-Colors Mixing / Single RGBAW Colors "
•Electronic Dimming 0-100%"
•Strobe(0-100%)"
•Built in Microphone"
•DMX-512 protocol"
•3-Pin DMX Connection"
•Five/Nine DMX Modes:"
•Wireless compatible "
•Built in Microphone"
The Panta V5Profile carries a 1 year limited warranty. Please fill out the enclosed
warranty to validate your purchase. All returned service items whether under
warranty or not, must be freight pre-paid and accompany a return authorization
(R.A.) number. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A. number
must also be written down on a piece of paper included in the shipping carton. If
Penta-V18 Profile Features
Penta-V18 Profile Introduction
Penta-V18 Profile Warranty Registration

the unit is under warranty, you must provide a copy of your proof of purchase
invoice. You may obtain a R.A. number by contacting our customer support
team on our customer support number. All packages returned to the service
department not displaying a R.A. number on the outside of the package will be
returned to the shipper."
The unit should be mounted using a mounting clamp (provided)/keep in plane
surface, affixing it to the mounting bracket that is provided with the unit. Always
ensure that the unit is firmly fixed to avoid vibration and slipping while operating.
Always ensure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times the unit’s weight. Also, always use a
safety cable that can hold times the weight of the unit when installing the fixture."
The equipment must be installed by a professional, and it must be installed in a
place where it is out of the reach of people’s grasp.
Unpacking: Thank you for purchasing the Penta V18 Profile by Rasha®. Every
Penta-V18 Profile has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage that may
have occurred during shipping. If the carton appears to be damaged, carefully
inspect your fixture for any damage and be sure all accessories necessary to
operate the unit has arrived intact. In the case damage has been found or parts
are missing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without first contacting
customer support. "
Introduction: The Rasha® Penta V18 Profile is part of a continuing pursuit to
create high quality intelligent lighting. The Penta V18 Profile is a DMX intelligent,
high-powered LED par fixture. This fixture can be used in a standalone mode or
connected in a Master/Slave configuration. This Profile has five operating modes:
Sound Active mode, Auto mode, RGB+White+ Amber mode, 13 Static Color
mode, and DMX control mode. Color Strobe Effect., Color Change, Color
Dimmer color Jump/Gradually auto change. This has is compactable with
wireless technology or wireless dmx . To optimize the performance of the
product, please read these operating instructions carefully to familiarize yourself
with the basic operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please keep this
manual with the unit, for future reference. "
Customer Support: Rasha provides a customer support line, to provide set
up help and to answer any question should you encounter problems during
your set up or initial operation. You may also visit us on the web at or
www.rashaprofessional.com for any comments or suggestions. Service
Hours are Monday through Friday 8:30 a.m. to 5:30 p.m. Pacific Time Zone
(UTC-08:00) Standard Time. "
Voice: [phone]"
E-mail: [email protected] , Warning! To prevent or reduce the
risk of electrical shock or fire, do not expose this unit to rain or moisture. "
Caution! There are no user serviceable parts inside this unit. Do not attempt
any repairs yourself, doing so will void your manufactures warranty. In the
unlikely event your unit may require service please contact Rasha
Professional A/S ."
•To reduce the risk of electrical shock or fire, do not expose this unit rain or
moisture"
•Do not spill water or other liquids into or on to your unit."
•Do not attempt to operate this unit if the power cord has been frayed or
broken. Do not attempt to remove or break offthe ground prong from the
electrical cord. This prong is used to reduce the risk of electrical shock and fire
in case of an internal short."
•Disconnect from main power before making any type of connection."
•Do not remove the cover under any conditions. There are no user serviceable
parts inside."
•Never operate this unit when it’s cover is removed."
•Never plug this unit in to a dimmer pack"
•Always be sure to mount this unit in an area that will allow proper ventilation.
Allow about 6” (15cm) between this device and a wall."
•Do not attempt to operate this unit, if it becomes damaged."
•This unit is intended for indoor use only, use of this product out` doors voids all
warranties."
•During long periods of non-use, disconnect the unit’s main power."
•Always mount this unit in safe and stable matter."
•Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention
to the point they exit from the unit. "
•Cleaning -The fixture should be cleaned only as recommended by the
manufacturer. "
•Heat -The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that
produce heat."
•The fixture should be serviced by qualified service personnel when: "
A. The power-supply cord or the plug has been damaged. "
B. Objects have fallen, or liquid has been spilled into the appliance. "
C. The appliance has been exposed to rain or water. "
Penta-V18 Profile Installation
Penta-V18-Profile Safety Precautions

D. The appliance does not appear to operate normally or exhibits a marked
change in performance. "
Power Supply: The Rasha Penta V18 Profile contains a switching (Dual Voltage)
voltage switch, which will auto sense the voltage when it is plugged into the
power source. With this switch there is no need to worry about the correct
power voltage; this unit can be plugged in anywhere. Light can recharge and use
at same time. "
DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as
a form of communication between intelligent fixtures and controllers. A wireless
transmitter/ DMX controller sends DMX data instructions from the controller to
the fixture. DMX data is sent as serial data that travels from fixture to fixture via
the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most
controllers only have a DATA “OUT” terminal). "
DMX Linking: DMX is a language allowing all makes and models of different
manufactures to be linked together and operate from a single controller, as long
as all fixtures and the controller are DMX compliant. To ensure proper DMX data
transmission, when using several DMX fixtures try to use the shortest cable path
possible or connect wireless transmission. The order in which fixtures are
connected in a DMX line does not influence the DMX addressing. For example; a
fixture assigned a DMX address of Addr-A001 may be placed anywhere in a
DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture
is assigned a DMX address of A0001, the DMX controller knows to send DATA
assigned to address A001 to that unit, no matter where it is located in the DMX
chain/Controller."
Data Cable (DMX Cable) Requirements (For DMX Operation): The Penta V18 Profile
can be controlled via DMX-512 protocol/Wireless DMX transmitter. The Penta
V18 Profile has 5/9 DMX channel modes, The DMX address is set on the back
panel of the Penta V18 Profile. Your unit and your DMX controller require a
standard 3-pin XLR connector/wireless DMX Transmitter for data input and data
output. We recommend Rasha-Cable DMX cables/Wireless Transmitter. If you
are making your own cables, be sure to use standard 110-120 Ohm shielded
cable (This cable may be purchased at almost all pro lighting stores) or 2.4Mhz
Wireless Transmitter/Receiver. Your cables should be made with a male and
female XLR connector on either end of the cable. Also, remember that DMX
cable must be daisy chained and cannot be split."
Notice: Be sure to follow figures two and three when making your own cables.
Do not use the ground lug on the XLR connector. Do not connect the cable’s
shield conductor to the ground lug or allow the shield conductor to come in
contact with the XLR’s outer casing. Grounding the shield could cause a short
circuit and erratic behavior. "
 "
Special Note: Line Termination. When longer runs of cable are used, you may need
to use a terminator on the last unit to avoid erratic behavior. A terminator is a
110-120 ohm 1/4 watt resistor which is connected between pins 2 and 3 of a
male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR
connector of the last unit in your daisy chain to terminate the line. Using a cable
terminator (Rasha part number R-DMX/T) will decrease the possibilities of erratic
behavior "
 "
5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX-512 data cables
for DATA transmission in place of 3-pin. 5-pin DMX fixtures may be implemented
in a 3-pin DMX line. When inserting standard 5-pin data cables in to a 3-pin line
a cable adaptor must be used, these adaptors are readily available at most
electric stores. The chart below details a proper cable conversion."
"
Penta V18 Profile Set Up
Penta V18 Profile Set Up
Penta V18 Profile Operating Instructions

UP and DOWN buttons to adjust intensity. Flow the below route to set the
fixture from led display "
1. !: 1-512 ( SET DMX ADDRESS)
2. !: ( CHOOSE/SET 5CH/9CH)
3. !: SL1/SL2/Nast- Salve/ Master mode
4. !: (Built in effects and mode)
!(SOUND ACTIVE MODE)
!(COL1 to COL12、STATIC COLOR MODE)
!(0-255 STROBE SPEED)
!(COLOR CHANGE, SPEED SP01 to SP08）
5. Led ( ON/OFF THE DISPLAY SCREEN)
6. diSp( CHANGE THE DISPLAY ANGLE 180 DEG OR 360 DEG)
7.!: ( COLOR MANUAL BRIGHTNESS CONTROL)
!RED (0-255)
!GREEN (0-255)
!BLUE(0-255)
!AMBER (0-255)
!WHITE (0-255)
!TEST FIXTURES COLOR
8. .!: (TOTAL HOURS OF FIXTURE USED)
Operating through a DMX controller gives the user the freedom to create their
own programs tailored to their own individual needs. This function also allows
you to use your fixtures as spot lights. The Penta V18 Profile has 5/9 DMX
Mode (for each modes’ DMX traits See below dmx chart)."
1. This function will allow you to control each individual fixture’s traits with a
standard DMX 512 controller."
2. To run your fixture in DMX mode press the Addr button until “Addr” is
displayed. “ADDR” represents the DMX address setting then choose A001. Use
the UP or DOWN buttons to select your desired DMX address, then press the
SETUP button to select your DMX Channel mode. "
3. Use the UP or DOWN buttons to scroll through the DMX Channel modes.
The Channel modes are listed below: "
To run the 5 Channel Mode, press the CHND button then use UP/ Down Button
unit “5CH” is displayed. This is the 5 Channel DMX Modes. "
To run the Channel Mode, press the CHND button then use UP/ Down Button
unit “9CH” is displayed. This is the 9Channel DMX Mode. "
4. Please see below pages for DMX values and traits."
5. After you have chosen your desired DMX Channel mode plug in the fixture
via the XLR connections to any standard DMX controller."
LED Display Inversion:
After initialization, the unit is ready for setting and working. "
This function will allow you to “flip” the LED display. "
1. Plug the fixture in and press the MENU button until “ADDR” is displayed-
ENTER “A001” represents either DMX Connection Mode"
2. Press the UP or DOWN button to “flip” the display. Press the MENU button
to exit. "
Default Running Mode:"
This is a default running mode. When this mode is activated all modes will
return to their default settings. "
1.Press the MENU button until “ADDR” ENTER- Press A001 and press ENTER
for DMX Mode."
2.Press the UP and DOWN buttons simultaneously. Press the MENU button to
exit. "
3.Press MENU- UP/DOWN-SLDN –NAST(Master mode) SL1(Salve mode) "
4.Press MENU- UP/DOWN –SHND-SOUN for sound active mode "
5.Press MENU- UP/DOWN- SHND-COLO – AUTO to choose auto color mixing"
6.Press MENU- UP/DOWN-SLND-NAST-UP/DOWN-SHND-COLO-CO1 to
CO15 Static color and choose CO12 for the custom color. "
7.Choose NANU then Enter then put the value of each color RGBWA then
Enter, to display the customized color go to CO12 or CO13 then press Enter. "
Penta-V18 Profile DMX Mode
Penta-V18 Profile Operating Instructions
A 0 0 1
Menu down up Enter

Master-Slave Configuration: "
This function will allows you to link units together to run in a Master-Slave mode. In
Master-Slave operation one unit will act as the controlling unit and the others will
react to the controlling unit’s built-in programs. Any unit can act as a Master or as a
Slave however, only one unit can be programmed to act as the “Master.” "
Master and salve connection setting without using the DMX controller "
1. Daisy chain your units via the XLR connector or DMX cable on the rear of the
unit. Use standard XLR data cables to link your units together. Remember
that the Male XLR connector is the input and the Female XLR connector is the
output. The first unit in the chain (master) will use the female XLR connector
only. The last unit in the chain will use the male XLR connector only. "
2. Set first light at “NAST” and rest of fixtures on SL1 Mode. It means first fixture
will be the master fixture which send same operating command to other
fixtures of the network(we call those other fixture on Slave mode or Sl1 or Sl2) "
3. After done this setting of No 2, now all fixtures are connected and ready to go
or ready to get command of the first fixture or master fixture. Now you can set
different operating modes, example: sound active, static color, auto or fade.
Once you set the modes at first master unit other fixtures will start to project
same the effect as master unit did. "
Master and salve connection setting by using the DMX controller
1. Connect the DMX controller and Fixture by using the DMX cable. Link other
units with first fixture and rest of unit, set all fixtures at Sl1 or Sl2 mode. Once
you set the fixture it will appear “A001” or “STBY” it means now fixture ready
to go with DMX controller. "
DMX Control:"
Operating through a DMX controller gives the user the freedom to create their
own programs tailored to their own individual needs. Follow the directions
below to set your DMX Mode and address."
Before connecting to DMX controller, your fixture has different DMX channel
modes, please select your desired mode by pressing the DMX Mode button,
then using the “up” or “down” buttons to scroll through the DMX Channel
Modes. Set the mode Sl1 or Sl2 before you address the fixture. "
How to group fixtures/ project different colors in different fixtures by using same
DMX controller/how to set DMX address so user can control the fixture and project
different color at same time by same DMX controller?
1. First make sure how many groups you are going to create which you are
planning to control by 1 DMX controller. In 1 group you can link minimum 1 to
maximum 33 fixtures. "
2. Link all fixtures with each other by Cable or link each group in DMX splitter.
DMX splitter is a device which helps to split the DMX signals to different
group, DMX splitter will be useful and needed if you are going to control over
33 fixtures at once. In market you can find 8 channels, 16 channels and 32
channel DMX splitter. "
3.Once you made the link or network, Now you can put address value in “Addr”
or “A001”. Remember always that you need to put gap between 1st group and
second group or third group or in each group depends on the DMX channel.
On Panta V5par it has 5/9 DMX channel, let’s say user choose 9 DMX channel
and want to make the 4 group each group it has 10 fixtures. Set first 10 pcs
fixtures to A001, set second group’s all 10pcs fixtures at A0010, set third
group all fixtures at A020 and set all fixtures of the group 4 in A030. It means
that DMX controller feeder 1- 9 it will control fist group, 9-19 DMX controller
feeder it will control group 2, 20-29 DMX controller feeder will control the
group 3 and 30-39 DMX controller feeder it will control the group 4. We put
here gap of the 9 because we set the light at 9 DMX channel mode.
hereA001(01), A010(20), A020(020) and A030(30) those in bracket (01),(10),
(20) and (30) those it will be referred as DMX channel number 1 of each group
also DMX controller’s feeder number. Use the feeder of the DMX controller to
control the fixtures separation. "
5 CH Modes "
Penta-V18 Profile Master-Slave Configuration
Penta-V18 Profile Operation
Penta-V18 Profile DMX Values & Functions
Channel
Value
Description
CH1
0
No action
1-255
RED dimmer
CH2
0
No action
1-255
GREEN dimmer
CH3
0
No action
1-255
BLUE dimmer
CH4
0
No action
1-255
Amber( dimmer -Sharp
CH5
0
No action
1-255
White (0-255 white dimmer)

9 CH Modes "
Listed below are a few common problems the user may encounter, with
solutions."
Unit not responding to DMX:"
1. Check that the DMX cables are connected properly and are wired correctly
(pin 3 is “hot”; on some other DMX devices pin 2 may be ‘hot’). Also, check
that all cables are connected to the right connectors; it does matter which way
the inputs and outputs are connected."
Unit does not respond to sound:"
1. Quiet or high pitched sounds will not activate the unit."
2. Make sure that Sound Active mode is activated. "
Due to fog residue, smoke, and dust cleaning the internal and external optical
lenses must be carried out periodically to optimize light output. "
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing."
2. Clean the external optics with glass cleaner and a soft cloth every 20 days."
3. Always be sure to dry all parts completely before plugging the unit back in."
Cleaning frequency depends on the environment in which the fixture operates
(i.e. smoke, fog residue, dust, dew). "
A. Rash Professional A/S (Rasha Lights). Hereby warrants, to the original purchaser, Rasha products to be free of
manufacturing defects in material and workmanship for a prescribed period from the date of purchase This
warranty shall be valid only if the product is purchased within the United States, including possessions and
territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at
the time service is brought. "
B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product.
Contact Rasha Professional. Service Department at 001-323-6037059. Send the product only to the Rasha
Professional A/S. service department . All shipping charges must be pre-paid. If the requested repairs or service
(including parts replacement) are within the terms of this warranty. No accessories should be shipped with the
product. If any accessories are shipped with the product, Rasha Professional A/S LLC. shall have no liability
whatsoever for loss of or damage to any such accessories, nor for the safe return thereof. Visit
(www.rashaprofessional.com/warranty-registration/) for details This warranty is void if the serial number has been
altered or removed; if the product is modified in any manner which Rasha Professional A/S. concludes, after
inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other
than the Rasha Professional A/S Co. factory unless prior written authorization was issued to purchaser by Rasha
Professional A/S LLC if the product is damaged because not properly maintained as set forth in the instruction
manual. "
C. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up.
During the period specified above, Rasha Professional A/S LLC will replace defective parts at its expense with
new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects
in material or workmanship."
D. Rasha Professional A/S LLC. Reserves the right to make changes in design and/or improvements upon its
products without any obligation to include these changes in any products theretofore manufactured. IN NO
EVENT SHALL RASHA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT OR
PUNITIVE LOSS OR DAMAGE OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR
REVENUES, LOSS OF USE OF THE PRODUCT OR ANY OTHER GOODS OR ASSOCIATED EQUIPMENT,
DAMAGE TO ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE PRODUCTS,
FACILITIES OR SERVICES, DOWN TIME COST, INSTALLATION OR LABOR COSTS, OR CLAIMS OF THE
PURCHASER’S CUSTOMERS, WHETHER BASED ON WARRANTY, CONTRACT OR NEGLIGENCE, ARISING IN
CONNECTION WITH THE SALE, USE OR REPAIR OF THE PRODUCT. RASHA’S MAXIMUM LIABILITY SHALL
NOT, IN ANY CASE, EXCEED THE PURCHASE PRICE OF THE PRODUCT THAT GIVES RISE TO THE CLAIM.
EXCEPT FOR THE LIMITED WARRANTY SET FORTH HEREIN, ALL PRODUCTS SOLD BY RASHA ARE SOLD
“AS IS” WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT
Channel
Value
Description
CH1
0
No action(blackout)
1-255
RED dimmer--Bright
CH2
0
No action (blackout)
1-255
GREEN dimmer--Bright
CH3
0
No action (blackout)
1-255
BLUE dimmer--Bright
CH4
0
No action (blackout)
1-255
Amber dimmer-Bright
CH5
0
No action (blackout)
1-255
White Dimmer-Bright
CH6
0
No action(blackout)
128-255
RGBAW dimmer-Bright
CH7
0-127
No action (blackout)
128-255
Strobe from slow to fast
CH8
0
No action (blackout)
1-255
Auto Run from slow to fast
CH9
0
No action (blackout)
1-255
Auto Run Normal
Penta-V18 Profile Trouble Shooting
Penta V18 Profile Cleaning
Penta-V18-Profile Warranty

NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ALL OF WHICH ARE EXPRESSLYAND SPECIFICALLY DISCLAIMED BY RASHA."
This warranty is the only written warranty applicable to Rasha Professional A/S LLC., Products and supersedes
all prior warranties and written descriptions of warranty terms and conditions heretofore published"
Auto Sensing Voltage: This fixture contains a automatic voltage switch, which will
auto sense the voltage when it is plugged into the power source.
Please Note: Specifications and improvements in the design of this unit and this
manual are subject to change without any prior written notice."
©Rasha Professional A/S. "
375 W W Esplanade Ave, San Jacinto CA-92583-USA"
TEL: [phone] Fax: [phone]"
Web: www.rashalight.com / E-mail: [email protected],
[email protected]/ [e-mail] "
Panta-V18-Profile Specifications
Model: Panta-E5 Profile-V2.0 "
Voltage: 100V ~ 240V/50~60Hz "
LEDs: 18 x 15W High Brightness 5-in-1 – RGBWA Color "
Beam Angle: 25/35/45 Degrees "
Working Position: Any safe working position "
Power Draw: 75W(24Voltage) "
Power Cord Daisy Chain: 33 Fixtures Max. "
Fuse: 500mA "
Weight: 3.3Kgs. "
Dimensions: 26 (L) x35 (W) x 26 CM "
Colors: RGB+Amber +White Color Mixing and single color"
Color: 16.7 million kinds of color change"
DMX Channels: 5/9 DMX"
Compactable: 2.4 MHZ wireless Signal receiver(sell separately)"
Control Mode: Stand alone/Maser slave/DMX/Auto "
Warranty: 2Year (365 days)"