raycop RS2 User manual

A doctor’s
work starts by
listening to patients
As a physician, I often heard concerns
about allergies and asthma symptoms caused
primarily by irritants in dust, dirt and pollen. These
are usually unseen by the naked eye, but nevertheless
exist all around your living space. After listening to the needs of my patients, I realized
that I could remedy the problem by developing a fabric purifier called RAYCOP to help
sanitize the surfaces of where we sleep and live.
Based on scientific research, this new purifying technique was designed to apply UV rays
to sanitize and clean fabric surfaces in your home such as bedding and upholstery.
Through continuous research and development, we have been able to develop a
very unique and effective product to effectively trap and help eliminate
dust mite matter, pollen and dirt.
DR. SUNGJIN LEE , Founder of RAY C O P
W
H
Y
T
H
E
R
A
Y
C
O
P
P
U
R
I
F
I
E
R
W
A
S
C
R
E
A
T
E
D
W
H
Y
T
H
E
R
A
Y
C
O
P
P
U
R
I
F
I
E
R
W
A
S
C
R
E
A
T
E
D

Not a vacuum cleaner (vacuums don’t
sanitize) or an electronic gadget, you’ll find your
RAYCOP Purifier instantly useful throughout your home —
everywhere you live, eat and sleep. A quick way to purify your bed
and table linens, you’ll especially love it for fabrics that can’t just
be tossed in the wash, like upholstery, drapes even decorative pillows.
The optimized synergy of UV sanitization, vibration, suction and filtration works
to carefully sanitize even your delicate fabrics. With the RAYCOP Purifier, your
home always looks cleaner and feels fresher (without constantly doing laundry)
and your family always breathes more freely.
E
S
S
E
N
T
I
A
L
T
O
Y
O
U
R
H
O
M
E

The most sacred places
in the home are your bed and couch. They’re also
the likely home for dust mite, bacteria, and pollen.
House dust mite feed on human skin, and flourish in the stable
environment of dwellings. Their matter is a common cause of asthma and
allergic symptoms worldwide. Therefore, removal of house dust mite matter is
a challenging task. Another microscopic intruder, bacteria is commonly found in
public places like gyms and schools, and is easily brought back home to our beds.
RAYCOP Purifier’s patented RayClean Technology®is
uniquely designed to effectively eliminate dust mite
matter, bacteria, pollen and other common allergens
from bedding and other fabric surfaces. Now your
whole home is a fresher and cleaner environment.
W
H
Y
U
S
E
R
A
Y
C
O
P

Delicate
Normal
Heavy
Power Button
Press for a
couple of seconds
Standby and
press again
Start using and
also change modes
DELIC AT E MODE
For delicate and lighter fabrics such
as sheets, curtains, thin blankets
N O RMAL MODE
For blankets, decorative
pillows, and covers
HEA V Y MODE
For sturdier fabric surfaces such
as upholstery and mattresses
The various purifying modes enable the
optimal balance between the bristle power,
suction force, and vibration speed.
Control Panel
Choose from 3 different modes by
pressing on the power button:
Function Names
Alert to Wash Dust Box Filter
Alert to Replace Micro HEPA Filter
Dust Box Lamp
Delicate
Normal
Heavy
Lock Lamp
Purifying Modes
H
O
W
T
O
S
T
A
R
T

How to Use
PLEASE NOTE: The RAYCOP Purifier was designed for home fabric surfaces
and is not recommended on wall to wall carpeting, wood, leather or metal.
RAYCOP Purifiers are designed to be sturdy to ensure stability
and durability, but you’ll quickly see how easily your purifier glides on
the surface. Slowly glide along the surface you want to clean 2 or 3 times.
Once your purifier is laid flat on the surface, the UV light will turn on.
Direct contact on the surface ensures effective cleaning so do not lift or angle your purifier.
RAYCOP was created to be used on various surfaces from heavy to delicate fabrics; the
suction power was specifically calibrated to ensure there’s no damage to fabric surfaces.
Once your purifier is lifted or angled, the UV light will automatically turn off.
H
O
W
T
O
U
S
E
R
A
Y
C
O
P
R
S
2

Dust Box Filter
UV Lamp Indicator Exhaust
Opening
Power Cord
Rewind Button
Micro HEPA
Filter Cover
Micro HEPA
Filter Cover
(Equipped with
HEPA Filter)
UV Lamp
Target Detection Sensor
UV Lamp
Grille/Frame
Target
Detection Sensor
Exhaust
Opening
Power Cord
Grille Hook
Surface Brush
Pulsating Pad
UV Lamp
Grille/Frame
UV Lamp Set
Function
Display Panel
Power Button
(Switch Modes)
Suction Width Guide
Dust Box Filter
Detection Sensor
Dust Box
Indicator
UV Ray Width Approx. 9in (23cm)
Dust Box
REMINDER:
When it’s time to replace your parts,
please use genuine RAYCOP parts.
To order please visit www.raycop.comor
contact us at [e-mail]
G
E
T
T
I
N
G
T
O
K
N
O
W
R
A
Y
C
O
P
R
S
2

End Cap
Filter
Brush
Slide the grille hooks at both ends until the green point appears to remove them.
Remove the surface brush
from the cap side.
Grille Hook
Green Point
Pull out the
dust box as
shown below.
Air dry your filter in a
shaded area, do not use a
dryer. Once dry, secure the
filter back into the dust box.
1
1
Remove the dust box filter by pressing
the protrusions on both sides.
23
Surface Brush
For more maintenance and parts replacement
(such as: the UV-lamp & HEPA filter) information,
please visit raycop.com/maintain
3
To avoid dust from scattering
into the air, submerge both the
dust box and filter in water and
remove the filter from the dust box.
Note: If the filter is clogged, you may
notice that the suction is weaker.
Clean the filter with a mixture of
water:detergent (ratio 9:1).
2
Securely attach the dust box by
pressing it into the cleaner until
the dust box lamp goes out.
4
Detach the cap and
remove house dust or
hairs entangled in the
surface brush. If the
brush is excessively dirty,
wash it with detergent
or soap, rinse with water,
and thoroughly dry.
C
L
E
A
N
I
N
G
Y
O
U
R
R
A
Y
C
O
P
R
S
2

Dust Box Filter Detection Sensor
A safety device that prevents your purifier
from operating without the dust box filter
attached by using a sensor located on the
dust box attachment.
Dust Box Filter Washing Alert
If house dust accumulates on the dust box
filter, starts flashing red to inform you
it’s time to wash the dust box filter.
House Dust Indicator
The house dust indicator is designed
to light up during use so you can easily
check how much dust has accumulated.
This alerts you to clean the dust box
and filter.
Lock Function
A safety function to prevent your purifier
from accidentally operating by locking it
when left for about 1 minute while the
power plug is in an outlet.
Micro HEPA Filter Replacement Alert
Starts flashing in red to inform you it’s
time to replace the micro HEPA filter with
a new one.
Motor Overheating Prevention Device
If your purifier is continuously used for 30
minutes, the motor overheating prevention
device automatically stops suction to
prevent overheating the motor. This may
occur if the dust box or filter is clogged
with house dust.
Run Time Control System
You will hear 5 beeps right before your
purifier automatically stops after running
around 29 minutes.
Target Detection Sensor
A safety device that automatically turns off
the UV lamp when your purifier is moved
away from the target. The UV lamp is
automatically turned back on when your
purifier is moved close to the target again.
UV (ultraviolet light) Blocking Feature
Minimizes UV emitted to areas other than
the area being cleaned.
D
E
S
I
G
N
E
D
F
O
R
S
A
F
E
T
Y

WARNING – To
reduce the risk of fire,
electric shock,
or injury:
• Do not leave appliance when
plugged in. Unplug from outlet
when not in use and before
servicing.
• Do not use outdoors or on
wet surfaces
• Do not allow to be used as
a toy. Close attention is
necessary when used by
or near children.
• Use only as described in this
manual. Use only manufactur-
er’s recommended attachments.
• Do not use with damaged cord
or plug. If appliance is not
working as it should, has
been dropped, damaged, left
outdoors, or dropped into water,
return it to a service center.
• Do not pull or carry by cord, use
cord as a handle, close a door
on cord, or pull cord around
sharp edges or corners. Do not
run appliance over cord. Keep
cord away from heated
surfaces.
• Do not unplug by pulling on
cord. To unplug, grasp the plug,
not the cord.
All RAYCOP products are designed
with the highest safety standards.
IMP O RTA N T S A F E TY I NSTR U C T IONS
Read all instructions before using
• Do not handle plug or
appliance with wet hands.
• Do not put any object into
openings. Do not use with any
opening blocked; keep free of
dust, lint, hair, and anything
that may reduce air flow.
• Keep hair, loose clothing,
fingers, and all parts of body
away from openings and
moving parts.
• Turn off all controls before
unplugging.
• Do not use to pick up
flammable or combustible
liquids, such as gasoline, or
use in areas where they may
be present.
• Always turn off this appliance
before connecting or
disconnecting motorized
nozzle.
• Hold plug when rewinding
onto cord reel.
• Do not allow plug to whip
when rewinding.
• Do not pick up anything that
is burning or smoking, such
as cigarettes, matches, or
hot ashes.
• Do not use without dust box
and/or filters in place.
SAVE THESE
INSTRUCTIONS
To reduce the risk of electric
shock, this appliance has a
polarized plug (one blade is
wider than the other). This plug
will fit in a polarized outlet only
one way. If the plug does not
fit fully in the outlet, reverse
the plug. If it still does not fit,
contact a qualified electrician
to install the proper outlet. Do
not change the plug in any way.
UV Lamp Caution:
• Direct exposure to ultraviolet
radiation can cause serious
skin burns and eyes.
• Do not touch the UV lamp
during or immediately
after use.
• Do Not directly emit the
ultraviolet light from the
UV lamp towards the eyes or
skin of humans and animals.
• UV-C bulbs contain mercury,
which is considered hazardous
waste and is subject to Federal
and/or state hazardous waste
regulations.
- In rare instances, (similar
to standard florescent light
bulbs) mercury leakage
could occur if the bulb
breaks and could cause birth
or reproductive issues.
• Please keep the UV lamp
protective tube clean.
- Inadequate and infrequent
maintenance may lower
the transmission of
ultraviolet light.
Other Precautions:
• Do not use or store heating
appliances such as stoves
or heaters, nor flammable
substances such as combus-
tible sprays near this
product.
• Do not stick knives,
thumbtacks, burning ash,
toner powder or other
inappropriate materials.
• If you notice any abnormal
noise, odors, or smoke
emanating from this
product, immediately
remove the power plug.
• Please visit raycop.com/
maintain for specific
instructions on proper
cleaning and maintenance
practices.
This product is intended for
primarily for household use on
mattresses, bed covers,
bedding, pillows, cushions,
sofas, and other fabric
products.
• Do not use for outdoor
purposes or on metal,
leather, wood, liquids or
other non-fabric surfaces.
S
A
F
E
T
Y
I
N
S
T
R
U
C
T
I
O
N
S

Technical Specifications
Model RS2-100A
Serial Number
Warranty Period 1 year from the date of purchase
(parts and additional products are not included)
Size (mm)
Weight
Power Consumption
UV-C Lamp
Vibration Pads
Surface Brush
Suction Mode
Retractable Power Cord
Air Filtration
UV Light Safety Mechanism
Motor Safety
15 x 17 x 6in (383.1 x 434.8 x 166.4mm)
Approximately 6lbs (2.77kg)
300W
11W (253.7nm)
4,600-5,000 RPM
200mm
3 Modes
3.3ft (3.8m)
Standard Filter + HEPA Filter
Two Built in Sensors for Surface Detection
Heat Detection with Automatic Cutoff Switch
EPA Company No. 92492
EPA Est. No. 92507-KOR-1
Produced For
RAYCOP North America Inc.
3875 Hopyard Road
Pleasanton, CA 94588
866.872.9267
• 3 Different Suction Modes
• 2 Separate Air Filtration System
• Surface Brush to Remove Hair and Debris
• Powerful 11 Watt UV-C Lamp
• 4,600-5,000/Minute Vibration Capability
• Retractable Cord
• Cradle Included for Easy Storage
C
O
M
M
I
T
M
E
N
T
T
O
Q
U
A
L
I
T
Y
R
A
Y
C
O
P
R
S
2

RAYCOP Limited One-Year Warranty
1.
2.
3.
4.
RAYCOP warrants its product to be free from defects in material and
workmanship for a period of one year from the date of the original
purchase from RAYCOP or an authorized RAYCOP distributor.
Proof of purchase is required for all warranty claims.
We thank you for being acustomer of RAYCOP.
This warranty does not cover damage, defects or failure caused by or resulting from accident,
external destruction, alteration, modification, abuse, misuse or misapplication of this product.
Please read all the documentations carefully to ensure RAYCOP was used as intended.
The warranty period is valid one year from the date of original purchase.
Follow the instructions below.
1. Locate original sales receipt and make note of your model and serial number.
2. Call RAYCOP at 866.8RAYCOP or 866.872.9267 from
9am to 5pm M-F PST, or email us at [e-mail].
3. You will be asked to provide your name, address, date of purchase,
model and serial number.
4. RAYCOP will arrange shipping boxes to be sent to your home to recover
the product. Simply follow the instructions inside the box on how to send
the device back to RAYCOP.
C
O
M
M
I
T
M
E
N
T
T
O
Q
U
A
L
I
T
Y

N
O
T
E
S

N
O
T
E
S

www.raycop.com
[email protected]
866.8RAYCOP (872.9267)