Raymedia ROV-1000 User manual

R
R
RO
O
OV
V
V-
-
-1
1
10
0
00
0
00
0
0 (
(
(C
C
CH
H
HA
A
AM
M
ME
E
EL
L
LE
E
EO
O
ON
N
N)
)
)
10.2”Overhead DVD Player
OPERATION MANUAL
Raymedia Co., Ltd
2005. 04. 23

Leading Digital Technology Operation Manual
Rev1.2
- 2 -
Important safety instruction
9Read these instructions
9Keep these instructions
9Heed all warnings
9Follow all instructions
9Do not use benzene, thinner, solvents or any other chemical for cleaning
9Wipe the cabinet with a soft cloth
WARNING :
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet (or back). Refer servicing to
qualified personnel only.
Safety precaution
This symbol indicates “dangerous voltage” inside the product that
presents a risk of electric shock or personal injury
This symbol indicates important instructions accompanying the
product
CAUTION: DVD PLAYERS USE AN INVISIBLE LASER BEAM, WHICH CAN
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO
OPERATE PLAYER CORRECTLY AS INSTRUCTION.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on.

Leading Digital Technology Operation Manual
Rev1.2
- 3 -
FCC Warning Statement
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY
TO OPERATE THE EQUIPMENT.
Disc storage
9Be careful not to harm the disc because the data on these discs is highly
vulnerable.
9Do not keep under direct sunlight.
9Keep in a cool, ventilated area.
9Store vertically.
9Keep in a clean protection jacket.
COPY PROTECTION
Many DVD discs are encoded with copy protection. Because of this, you
should only connect your DVD player directly to your TV, not to a VCR (Video
Cassette Recorder). Connecting to a VCR can result in a distorted picture from
copy -protected DVD discs.
This product incorporates copyright protection technology that is protected by
methods claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only, unless otherwise authorized
by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Regional coding
Both the DVD player and disc are coded by region. These regional codes
must match in order for the disc to play. If the codes do not match, the disc will
not play.
Other regional codes cannot be played in this unit. The unit will display
“WRONG REGION.”

Leading Digital Technology Operation Manual
Rev1.2
- 4 -
Region codes are printed on the DVD disc or protection jacket (rear side)
1. Canada, U.S., U.S.
Territories
2. Japan, Europe, South
Africa, Middle East
(including egypt)
3. Southeast Asia, East
Asia (including Hong
Kong)
4. Australia, New Zealand,
Pacific Islands, Central
America, Mexico, South
America, Caribbean
5. Former Soviet Union,
Indian Subcontinent,
Africa (also North Korea,
Mongolia)
6. China

Leading Digital Technology Operation Manual
Rev1.2
- 5 -
Congratulations on your purchase of the Raymedia Co.,Ltd ROV-
1000(CHAMELEON) 10.2” overhead DVD player. Before operating this 10.2”
overhead DVD player, please read this manual thoroughly and retain it for
future reference.
General features
• World slimmest & most compact 10.2” overhead DVD player (38mm)
• Patent hybrid slot loading mechanism
• Heat prevention from the roof
• Easy access to disc slot
• Anti shock, anti vibration and wide temperature endurance
• 10.2” wide screen TFT LCD panel (16:9 aspect ratio)
• Built-in DVD loader on the backside of LCD panel
• NTCS/PAL auto switching by video source
• Full function remote control with on screen display
•Attachable TV tuner and FM transmitter (optional)
•USB port for external USB device (optional)
•Built-in 6 LED IR transmitters for a wireless headphone
•Two audio/video inputs (composite video)
•Digital audio output for an external amplifier
•Last scene memory function for DVD
•3-way remote sensor eyes (front, rear and external)
•Dual bright dome light

Leading Digital Technology Operation Manual
Rev1.2
- 6 -
Main function descriptions
1. Front IR screen
Transmits audio to wireless headphones and receives remote control signal from the
remote control.
2. POWER button
Turns ROV-1000 (CHAMELEON) on or off
Button backlight is red color
3. PLAY/PAUSE button
Press this button to activate the play mode while a disc is loaded into the disc
compartment.
Press the button again to allow the user to pause the playback

Leading Digital Technology Operation Manual
Rev1.2
- 7 -
Button backlight is green color
4. NEXT/ F.F button
Allows the user to advances to the next chapter, track or scene during playback.
Press the button to allow NEXT and Press the button longer to work fast forward.
Button backlight is green color
5. PREV/ F.R button
Allows the user to goes back to the preceding chapter, track or scene during playback.
Press the button to allow PREV and Press the button longer to work FR.
Button backlight is green color
6. MODE button
Switches input source (DVD, TV, AUX1 or AUX2)
Button backlight is green color
7. EJECT button
Stops play and ejects disc.
Button backlight is green color
8. Dome lights button
Press this button to turn the dome light on.
Press the button again to turn the dome light off
9. LCD release lock button
Press this button the LCD screen drop down slightly
10. LCD detect switch
Turn LCD power off when panel is closed
11. Auxiliary video input.
Auxiliary video input port
12. Auxiliary audio input (left/right).
Auxiliary audio input ports (left/right)
13. Rear remote sensor
For remote control operation only
14. USB port (optional)
For external USB device (memory stick, multi card reader, hard disk, MP3 player and
digital camera)

Leading Digital Technology Operation Manual
Rev1.2
- 8 -
Remote control operation
Battery installation
Before attempting to operate your remote control, install the battery as
described below.
1) Turn the remote control face down. Using a clip and/or fingertip, pull
down the battery cover open.
2) Install one “CR2025” battery as shown. Make sure that proper polarity
(+ or -) is observed.
3) Align the cover tabs with the remote control and press down until the
cover clicks.
If remote doesn’t operate properly
1) Check the polarity +/- of the battery (Coin-Cell).
2) Check if the battery are drained.
3) Check if remote sensor is blocked by obstacles.
4) Check if there is any fluorescent lighting nearby.
Using the remote control
1) Point the remote control at the remote sensor located on the unit.
2) When there is bright ambient light near the unit, the performance of
the infrared remote sensor may be degraded, causing unreliable
operation.
3) The recommended effective distance for remote operation is about
7 meter.
Battery replacement
When battery become weak the operating distance of the remote
control is greatly reduced and you will need to replace the battery.

Leading Digital Technology Operation Manual
Rev1.2
- 9 -
Notes
1) If the remote control is not going to be used for a long time (more than several
weeks), remove the battery.
2) Do not mix ALKALINE, standard ( CARBON-ZINC) or rechargeable (NICKEL-
CADMIUM) battery.
WARNING
Do not dispose of battery in fire, battery may explode or leak.
1) POWER
Turns on or off the DVD player.
2) MODE
Use to select a input source. (DVD/TV/AUX1/AUX2)
3) SETUP
Use to set various functions according to individual preference.
4) EJECT
Open/Close the disc tray or ejecting / loading the disc slot.
5) DIM
Use to LCD backlight adjustment.
6) M.MENU
Use to LCD screen menu.
7) M.MODE
Use to LCD screen mode (3:4, WIDE, ZOOM) select.
8) IR.CH
Use to IR audio transmitter frequency select.
9) FM
Use to FM transmitter frequency select.
10) GOTO
Use to go to specific time or chapter and playing.
11) A - B
Repeats the selected segment.
12) NUMBER (1,2,3...9,0)
Use from the menu to select, title/chapter search, time search
and direct track number.
DIM M.MENU M.MODE
EJECT
IR.CH
FM
3
21
456
GOTO
789
A - B
RETURN/SCAN
0
CLEAR/DEL REPEAT/ADD
MENU
CH+CH-
SEL
TITLE/PBC
R.SLOW F.SLOW DISPLAY
MUTE STOP PLAY/PAUSE STEP
SUBTITLE AUDIO ANGLE ZOOM
VOLUMEPROGRAMSHUFFLE
POWER MODE SETUP

Leading Digital Technology Operation Manual
Rev1.2
- 10 -
13) RETURN/SCAN
Return to the normal operation after using the setup menu.
Use to TV channel scanning, the TV will stop on active channel.
14) CLEAR/DEL
Use when discarding wrong number input or returning to normal play during slow or search.
Use to delete TV preset channel from memory (Erase).
15) REPEAT/ADD
Repeats part all of a chapter, title, track or an entire disc.
Use to add TV preset channel to memory (Store).
16) CH- ( )∥◀◀
Use to move to the previous chapter or track.
Use to flip down through the TV channels.
17) CH+ ( )▶▶∥
Use to move to the next chapter or track.
Use to flip up through the TV channels.
18) MENU
Use to display the contents menu of the loader disc.
19) ▲▼◀▶
Use to selection on the menu screen.
20) SEL
Selects menu items and begins disc play.
21) TITLE/PBC
Use the display the title menu of the loaded DVD disc.
Use to select a particular scene or information of a VCD disc from the menu screen.
22) R.SLOW ( )◀◀
Backwards through the DVD disc from 2X to 64X faster. Forwards through the disc from 2X to
8X faster.
23) F.SLOW ( )▶▶
Forwards through the DVD disc from 2X to 64X faster. Forwards through the disc from 2X to
8X faster.
24) DISPLAY
Shown the information about title, chapter and time.
25) MUTE
Use to mute the audio. Pressing button again restores sound the previously set level.
26) STOP (■)
Stops disc play. When playing a VCD (PBC ON), the previous scene will appear.
27) PLAY/PAUSE ( )▶∥

Leading Digital Technology Operation Manual
Rev1.2
- 11 -
Begins / Pauses disc play.
28) STEP ( )▶┃
Advances playback one frame at a time.
29) SUB TITLE
Changes the current subtitle language to another language or switches of the language
display.
30) AUDIO
Changes the audio language to another available language.
31) ANGLE
Changes the playing angle another available angle (multi angle title only).
32) ZOOM
Zooms in on picture.
33) SHUFFLE
Plays the disc in random order.
34) PROGRAM
Use to CD program function.
35) VOLUME (+)
Use to volume increase.
36) VOLUME (-)
Use to volume decrease.

Leading Digital Technology Operation Manual
Rev1.2
- 12 -
Turning the ROV-1000 (CHAMELEON) on/off
1. Sliding the screen release lock forward will unlock the LCD screen and it will
drop down slightly. The internal hinge will hold the screen in position while the
system is in use.
2. Pressing the power button on the unit or the remote control will turn the system
on or off alternately. When in use the internal backlighting will illuminate the
controls.
Overhead dome lights
The lights integrated into the ROV-1000 (CHAMELEON) are controlled by
push-button switch. Push-button switch to the protruding position will turn the
lights off. And the other position will turn on the lights.
Remote Sensor
The ROV-1000 (CHAMELEON) incorporates three Infrared sensors that
relay signals from the remote control to allow the unit to be controlled simply by
pointing its remote control at the remote sensor eye.
DVD basics
To get the optimum use out of the DVD section, make sure you read this
section completely.
Types of discs your DVD will play
• DVD discs – DVD discs that contain video.
• Audio discs – Audio CDs contain musical or sound content only.
• MP3 discs – A disc that contains audio files (For example, a CD-R with

Leading Digital Technology Operation Manual
Rev1.2
- 13 -
down-loaded MP3 files).
• VCD discs –VCD discs which contain video.
• DVD-Recordable discs- Discs that contain video
• DVD-Rewritable discs- Discs that contain video
Loading and playing discs
Before you load a disc, make sure that it is compatible with the
player.
The following discs cannot be used with this player;
• All 80mm discs CDDA or DVD-Video, DVD-Audio.
• Mini disc(MD).
• Laser disc(LD).
• CD-I, CD-ROM, DVD-ROM, DVD-RAM.
To load and play a disc
Press the power button to turn the unit on. Select DVD mode and
insert the disc (face up) into the disc compartment. (Hybrid slot)

Leading Digital Technology Operation Manual
Rev1.2
- 14 -
Setting and adjustment for LCD
This chapter describes how to set and how to adjust using the on-screen
LCD setup menu.
Main menu
LCD setup menu has graphic user interface and it has four sub-
menu video adjust, OSD setting, video input select and audio setting.
Video adjust menu setup
Video adjust menu allows user to adjust for brightness, contrast,
sharpness, saturation, hue or factory default setup.

Leading Digital Technology Operation Manual
Rev1.2
- 15 -
OSD setting menu setup
OSD (On Screen Display) setting menu allows user to adjust for
LCD monitor position (horizontal or vertical), OSD display timeout, OSD
language or OSD transparency.
6 languages are available (see below picture).
TV function menu setup
TV function menu allows user can control TV function such as MTS,
media, auto-scan, set channel, add / del channel, channel label and
channel tracking.

Leading Digital Technology Operation Manual
Rev1.2
- 16 -
AUTO SCAN menu allows user to set all active channel in
` the particular area to be automatically preset to the memory.

Leading Digital Technology Operation Manual
Rev1.2
- 17 -
SET CHANNEL menu allows user to setting for active channel.
ADD / DEL CHANNEL menu allows user to add current channel to
memory (store) or delete preset channel from memory (erase)

Leading Digital Technology Operation Manual
Rev1.2
- 18 -
CHANNEL LABEL menu allows user to added TV preset channel
with label.
39 characters are available (see below picture)

Leading Digital Technology Operation Manual
Rev1.2
- 19 -
CHANNEL TRACKING menu allows user to adjust TV channel.
Exit to LCD setup menu
Exit to menu allows user to exit to LCD setup menu

Leading Digital Technology Operation Manual
Rev1.2
- 20 -
Settings and adjustments for DVD
This chapter describes how to set and how to adjust using the on-screen
DVD setup menu.
Using the setup menu
Using the setup display, you can do the initial setup, adjust the picture
quality and set the various outputs. You can also set a language for the on-
screen display, the setup display and limit play back by children.
1) Press the SETUP button to display the “setup menu” on the TV screen.
2) Select the main item you want using the▲▼ buttons, and then press
the SEL button.
PIC MODE menu setup
PIC MODE menu allows user to adjust picture state.