Raytec RVi2202 User manual

Application Drawing
RVi2202 Two-port 60W PoE++ Midspan Installation Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Lighting-End Installation
The Global Leader in LED Lighting for Security and Saftey www.rayteccctv.com
Important Safety Warning
- Connect the UTP cables from the IP lamp or other PoE powered device to
the upper RJ45 connectors of RVi2202. The cable must be a cat5/6 with a
maximum length of 100m (328 feet)
Ethernet Switch/NVR-end Installation
- Connect the UTP Cable (cat5/6) from the Ethernet switch to the standard
Ethernet port on the lower RJ45 connector of RVi2202. The total length of
UTP cable from network switch to the powered PoE device should not
exceed 100m (328 feet).
The RVi2202 is able to provide total 60W PoE output using its built-in 65W
power supply.
PoE Output up to 60W:
- Plug the AC power cord provided with the unit to the mains.
PoE Output up to 120W:
Warning: Unplug the AC power cord from the unit and
the mains.
- Connect the UTP Cable (cat5/6) from the Ethernet switch to the standard
Ethernet port on the lower RJ45 connector of RVi2202.
- Connect the the DC output connector of the RVi1120 to the DC input
connector of the Vi2202.
- Connect AC power cord of the RVi1120 to the mains.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should
conform to all local codes.
- DO NOT bundle UTP signal wires in the same conduit as high-voltage
wiring.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on equipment.
- DO NOT install the unit in a place where the operating ambient tempera-
ture exceeds 75° C.
- Make sure that the external power supply output voltage is in the recom
mended range.
- Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The mains plug is used as the disconnect device and shall remain readily
operable.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet through an AC to DC Power supply
when using DC input.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
The Raytec Model RVi2202 is a unique 2-port PoE Midspan designed for
the most demanding power applications of 10/100/1000 Base-T networks.
With the ability to provide up to 65W on a single port, it is the most cost
effective method for powering CCTV Lighting. The Midspan is compliant
IEEE 802.3af, IEEE 802.3at standards and 60W PoE application.
The RVi2202 can virtually meet requirements of any high power PoE
application. Its unique internal control system enables it to handle both
single PD and dual PD PoE devices. A highly reliable internal power supply
can provide up to 65W shared between 2 ports.
The Midspan is equipped with LEDs to provide power status. No IP setting
or configurations are required and it can completely transparent to the
Ethernet network and higher layer protocols.
The RVi2202's compact design dual channel design is smaller, lighter and
easier to fit in environmental enclosures than most single channel power
supplies.

Raytec 5 Year Warranty
The warranty requires return of a product directly to Raytec in the UK. Replacement
of parts or product may be new or refurbished and will meet or exceed specifications
of the original parts or products.
- Registration of the product is required to validate the warranty
- Proof of purchase may be required
- The repair or replacement of a faulty product within the warranty period remains at
the discretion of Raytec
The Raytec warranty covers defects in parts on workmanship but does not cover fair
wear and tear, defect resulting from misuse, unauthorized modification, operation or
storage outside the environment specification for the product or in-transit damage.
The warranty may only be enforced by the I can Ima first installer.
Should you have any questions relating to the Warranty of any Raytec product or
require any technical support please contact Raytec on 613 - 270 - 9990
Technical Specifications*
RoHS
Drawings
Ordering Information
Right View
Top View
Left View
Status LEDs
TEL [phone] • FAX [phone]
800 - 300 Terry Fox Drive Kanata, Ontario Canada K2K 0E3 • [e-mail] • www.rayteccctv.com
LED Name Color Status Function
OFF Power is OFF
ON Power is ON
OFF No PoE output
ON
Power
Electrical
Ethernet Interface Standard 10/100 BaseT
UTP Category-5 (or higher)
Output Power 64W agreagated stand aloane @ 52 VDC
120W agreagated w/Vi1120 external power supply@57 VDC
Input Power AC: 90-264VAC, 50-60 Hz, DC: 52-57VDC up to 130W
Status LEDs Power: Green LED
PoE On: Green LED
Connectors Input Interface: Shielded RJ-45
Output Interface: Shielded RJ-45
Main Power: IEC 320-C14 inlet
External Power Supply: Round 2.5mm Connector
Environmental
Humidity 0 to 90%, non-condensing
Temperature Operating: -10°C to +50°C
Storage: -30°C to +70°C
Mechanical
Dimensions 1.87x2.56x6.17 in., 4.7x6.5x15.3 cm (HxWxL)
Weight 0.95 lb (430 g)
Material Extruded Aluminum
Included Accessories
Molded IEC 7 ft. (200 cm) power cord
*Specifications subject to change without notice.
6.17"
15.3 cm
PoE++ Midspan
RVi2202
Data
Power
PoE 1
PoE 2
Data
Por t 2
Data + Po E
Por t 1
Data + Po E
www.rayteccctv.com
RVi2202
PoE++ Midspan
RoHS
TM
Made in U.S.A.
52-57VDC
Input
90-240VAC 50/60 Hz
2.56"
6.5 cm
1.87"
4.7 cm
Ordering Information
Part No.
RVi2202 Dual port High-Power PoE ++ Midspan
RVi1120 120W External Power Supply
PoE++ Midspan
RVi2202
Data
Power
PoE 1
PoE 2
Data
Port 2
Data + PoE
Port 1
Data + PoE
PoE 1
PoE 2
GREEN
GREEN ON PoE output is enabled
OFF No PoE output
PoE output is enabled
GREEN