Razer Wolverine Ultimate User manual

How To
1. Connect the controller to a PC using the USB to Micro-USB cable.
2. Wait until the Xbox One controller drivers are auto atically installed. You can also
anually update the drivers through the Device Manager.
See the answer below for ore details.
How to connect the Razer Wolverine Ulti ate to PC
1. Pull out the installed agnetized interchangeable D-pad or thu b stick.
2. Line up the new one and slot it in.
1. Select your profile then “Edit”.
2. Select “Assign Buttons”.
3. Select the button you want to edit.
4. Select a new function.
5. Select “Done” once re- apping is co plete.
See the answer below for ore details.
How to re ap or disable the ulti-function buttons on a Razer Wolverine controller
1. Unplug all connections and switch off your controller.
2. Use a lint-free icrofiber cloth with an alcohol-based cleaning solution.
3. Wipe the surface of your controller.
4. Use co pressed air to blow dust away fro the controller’s hard-to-reach areas.
See the answer below for ore details.
How to clean your Razer devices
Troubleshooting
Input the co plete part or product nu ber that atches the serial nu ber. See the answer below
for ore details.
I cannot register y Razer device because either the serial nu ber or part nu ber is not
recognized
Scenarios:
Unable to use the profile switch and button re apping function while the app is active or
ini ized.

Unable to switch profiles via the Quick Control Panel after quitting the Razer Controller
Setup for Xbox app.
To recover the onboard function:
1. Press the enu button on your controller.
2. Select "Exit".
To recover the switch profile button:
1. Unplug your controller.
2. Re-plug your controller.
Note: Button re apping and profile selection can be done through the app. This is to provide the
best user experience. Also, onboard profile switch and button re apping will not function when
the app is active or ini ized
Razer is aware of this and is working closely with Microsoft for a resolution. In the eanti e,
do the following:
1. Update the Razer Controller Setup for Xbox app to v1.7.31.0 (PC).
2. Navigate the app with a keyboard or ouse.
General Information
Yes. The Razer Wolverine Ulti ate works with the Razer Controller Setup for Xbox app to
access countless custo ization options for your controller such as:
Lighting effects
Button re apping
Thu b stick sensitivity adjust ent
Vibration intensity
Note: The Xbox button is not re appable.
Download the Razer Controller Setup for Xbox app fro Microsoft Store.
No. The Chro a on Razer Wolverine Ulti ate is designed especially for opti al console user
experience. Therefore, it does not sync up with other Razer Chro a-enabled PC peripherals.
Yes. The Razer Wolverine is recognized by Stea as an Xbox One controller.
No. Macro recording is not allowed as the controller is designed for tourna ent usage and
co ply with tourna ent rules and regulations.

Yes. The "Quick Control Panel" functions on your Razer Wolverine Ulti ate work regardless
you are using it on your PC or Xbox One.
No. The Razer Wolverine Ulti ate is a wired controller. It is designed specifically for
co petitive esports which requires stable connection and ini al latency.
Note: The detachable wire is for portability.
See the answer below to find a replace ent for lost or da aged Razer parts.
Where to buy Razer replace ent parts and accessories
1. Check out our co prehensive list of options to recycle your Razer device.
2. Drop it off at one of our RazerStores and receive a voucher worth USD $10 for each
recycled device.
3. Visit the DNA Group for progra s to recycle your Razer devices for free.
4. Find your local recycling resource fro Earth911.
5. Check out the list of official govern ent e-waste sites for your country.