RCP ADF-B833 User manual

Wireless Scale –Quick Start Guide
V1.1 REMOTE CARE PARTNERS PAGE 1
Wireless Scale
Quick Start Guide
Model # ADF-B833
Installing the Batteries
New batteries were installed in your device before shipping. Unless instructed by
a support person, skip this section
The scale operates on 3 AAA batteries.
1. Open the battery cover on the back of the scale.
2. Insert the batteries according to the “+” and “-” polarity symbols at the
bottom of the compartment.
3. Replace the battery compartment cover.

Wireless Scale –Quick Start Guide
V1.1 REMOTE CARE PARTNERS PAGE 2
Do not allow other people to use your scale. The scale is
specifically assigned to you and you only. Allowing other
people to use your scale can mislead your provider.
Taking a Measurement
1. Always place the scale on a flat, hard surface. Do not use on carpets.
2. Press lightly on the scale platform and then release it to start. The Scale will
display 0.0 and then the display will turn off. You can now step onto the
scale to get a measurement.
3. The scale will turn off automatically after your measurement is complete.
4. The reading will be automatically transferred to the RCP SmartHub and
sent to your provider.
1 Proper Placement of Feet
Understanding the Results
Your weight will be displayed on the LED readout at the top of the scale. The
display will indicate if it is showing your weight in Pounds or Kilograms. If the unit is
not correct, press the switch on the back of the scale and take another
measurement.
Healthy weight ranges vary by individual. Consult your provider to determine
your optimal weight range.