6. Precautions for Power Cables5. Product Troubleshooting
Possible Solution
Fault Symptom Items for Inspection
Air purifier not
working
Air outlet is smell
Poor purification
effect
Check if the air is too dry Increase indoor humidity
Change it's position, or
remove obstacles
The filter absorbs too much odor
or fumes Replace a new filter
Check if the power is on Turn on the machine
Plug tightlyCheck if the power plug is loose
●
●
●
●
●
●
●
●
Warning
The air purifier is placed in an
unventilated position or near an
obstacle
Do not use power sources other than the rated voltage (110-240V,
50-60Hz ). (Otherwise it may cause fire, electric shock, etc.)
Do not process, forcibly bend, pull, twist, or bundle the power cable, or
put it near high temperature objects. (Damaged power cable may cause
fire, electric shock, etc.)
Do not load heavy objects or clamp them. (Heavy load may cause fire,
electric shock, etc.)
Do not use the power cable or power plug when it is damaged or
inserted into the power socket loosely. (Otherwise it may cause fire,
electric shock, short circuit, etc.)
Do not insert or remove the power cord with wet hands. (Otherwise it
may cause electric shock, etc.)
When moving it, avoid damage to the power cable caused by your feet.
(Otherwise it may cause electric shock, heat, fire, etc.)
Do not replace the power cord without authorization. However, if it is
damaged and needs to be replaced, please contact the our maintenance
service center for repair.
The dust on the power plug or socket should be cleaned regularly.
(Excessive dust and moisture will cause poor insulation, which may
cause fire and electric shock, etc.)
Non-professionals are not allowed to disassemble the machine without authorization
to prevent the danger of electric shock. Please unplug the power supply first when
replacing or cleaning the filter. If there is a fault, please refer to the troubleshooting
solution in the user manual. If it still can not be eliminated, please contact our agent
or our company.
