Rectorseal 87018 Operational manual

Page 1 of 3

PRODUCT DATA SHEET

PRO-FIT

™

QUICK CONNECT

Push-to-Connect Refrigerant Fittings

Description

PRO-Fit Quick Connect push-to-connect refrigerant fittings quickly connect copper

and aluminum linesetsfor mini-split and unitary HVAC units. With no flaring orbrazing

involved, refrigerant lines can be securely and safely connected by PRO-Fit Quick Connect

in various environments.

The unique, leak-proof double O-rings sealing design creates a permanent high-pressure

gas seal that prevents connection leaks caused by galling, vibration, pulsation and

extreme temperature changes.

Packaging

NOTE: The units are individually sealed to allow

for resale by a distributor.

USN

Description

Vendor Part No

312969479

RectorSeal PRO-Fit 1/4 in. Quick Connect Union

87018

312969480

RectorSeal PRO-Fit 3/8 in. Quick Connect Union

87019

312969475

RectorSeal PRO-Fit 1/2 in. Quick Connect Union

87020

312969477

RectorSeal PRO-Fit 5/8 in. Quick Connect Union

87021

312969471

RectorSeal PRO-Fit 3/4 in. Quick Connect Union

87022

312969483

RectorSeal PRO-Fit 7/8 in. Quick Connect Union

87023

312969472

RectorSeal PRO-Fit 1/4 in. Quick Connect 90°Elbow

87025

312969474

RectorSeal PRO-Fit 3/8 in. Quick Connect 90°Elbow

87026

312969476

RectorSeal PRO-Fit 5/8 in. Quick Connect 90°Elbow

87027

312969478

RectorSeal PRO-Fit 3/4 in. Quick Connect 90°Elbow

87028

312969467

RectorSeal PRO-Fit 7/8 in. Quick Connect 90°Elbow

87029

312969490

RectorSeal PRO-Fit 1/4 in. Quick Connect Socket

87036

312969491

RectorSeal PRO-Fit 3/8 in. Quick Connect Socket

87037

312969492

RectorSeal PRO-Fit 1/2 in. Quick Connect Socket

87038

312969493

RectorSeal PRO-Fit 5/8 in. Quick Connect Socket

87039

312969488

RectorSeal PRO-Fit Support Kit 1/4 in. - 5/8 in.

87048

312969489

RectorSeal PRO-Fit Support Kit 3/4 in. - 7/8 in.

87049

Applications

•

For HVAC/R upto 870 psi (60 bar)

•Connect refrigerant lines with flame-free fitting

•Prevent refrigerant lineset leaks

Recommendations

•Residential use

•Coated aluminum linesets

•Mini-split HVAC units

•Unitary indoor coils

Characteristics | Features

•Quick and easy push-in

•Flame-free: no flaring or brazing needed

•Single-use with quick-release removal

•Robust, durable and reliable brass body

•Leak-proof double O-rings sealing

•Complete system with all sizesandconfigurations

•High tensile strength

•Vibration and impact resistant

•UV resistant

•Corrosion resistant

•Sight window for connection verification

•Compatible with major refrigerants including

R-410A and R-22

Page 2 of 3

Instructions

TOCONNECTFITTING:

1. Cut the tube.

2. Deburr.

3. Useprep tool (sold separately) to determine depth.

4. Mark insertion depth.

5. Push into fitting.

6. Double check on the fitting through window.

TODISCONNECT FITTING:

The refrigeration system must be isolated or pumped down before disconnecting. Press the release with disconnect clip to remove tubing. Make

sure that the fitting and tube are free from defects. The fitting and tubing should be free ofdamage, foreign object and marks on the outside

diameter. Do not insert fingers in the grip ring inside the fitting.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or

otherreproductive harm.For more information,goto www.P65Warnings.ca.gov.

Foradditional technical information,call toll free 1-800-231-3345.

Limited Warranty Certificate

1. LimitedWarranty

This Limited Warranty is a pass-through warranty from the manufacturer of the product, Essen Tech Co., LTD (“Manufacturer”) to RectorSeal, LLC (“RectorSeal”)

and on to you. Manufacturer warrants that, subject to the terms and conditions set out in this Certificate, the product subject to this sale will be of good quality

and workmanship and free of defects for a period of five (5) years after the date you purchase the products. This LimitedWarranty does not apply to changesto

the product or variations ofcolor (fading),shade or texture ofthe product due to age or fair and ordinarywear and tear.

The foregoing Limited Warranty will be voided under thefollowing conditions or circumstances:

(a)

the product has not been stored, used, installed or maintained in accordance with Manufacturer’s specifications, instructions, operating and maintenance

instructions or in compliance with the use or proper purpose intended by Manufacturer;

(b) the product defect has been caused by negligence, abuse, misuse, unauthorized alteration, repair, tampering, reconstruction or maintenance (including

modification of labels or packaging) or the use of sub-standard consumables or non-approved recommended refrigerants;

(c)

the product defect has been caused by abnormally corrosive conditions, high temperatures, open flame, fire, accidents, entry by vermin or insects or acts

of God, including without limitation, storms, cyclones, floods, earthquakes and other natural disasters;

(d) the product defect or the relevant loss or damage wascaused by good(s) or material(s) that are not manufactured or supplied by Manufacturer;

(e)

the product or any part of the product has been used or combined with good(s) or other material(s), or has been replaced with a part not supplied or ap-

proved by Manufacturer;

(f) the products were installed in multi-family or commercial applications;

(g) the product was not sold to you by RectorSeal’s authorized distributors;

(h) you were capable of preventing the damage or further damage, but did not do so; or

(i) neither Manufacturer nor RectorSeal were provided reasonable access to the product to physically inspect it, perform testing and/or obtain samples after

you filed a warranty claim.

YourExclusive Remedy

This Limited Warranty solely covers replacement of that portion of the product proven to be defective due to a manufacturing defect. You are responsible for

any labor costs associated with replacing the defective part. If replacement product is not available, Manufacturer may provide a product of a similar grade.

Replacement of a product does not re-start the warranty period. Neither Manufacturer nor RectorSeal will be liable under any circumstances for consequential,

incidental, special or punitive damages or losses (including without limitation loss of profits or losses flowing from delays or interruption to business), however,

caused (including through negligence), which you may directly or indirectly suffer in connection with your use of the product.

EXCEPTFORTHELIMITEDWARRANTYSETFORTHHEREIN,NEITHERMANUFACTURER NORRECTORSEALMAKESANYWARRANTYWHATSOEVERWITHRESPECTTO

THE PRODUCT, INCLUDING (A) WARRANTY OF MERCHANTABILITY; OR (B) WARRANTY OF FITNESS FOR APARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED,BY LAW,

COURSEOFDEALING,COURSEOFPERFORMANCE,USAGEOFTRADEOROTHERWISE.

Arbitration

(a)

ARBITRATIONCLAUSE.IMPORTANT.PLEASEREVIEWTHIS ARBITRATIONCLAUSE.ITAFFECTSYOURLEGALRIGHTS.

(b) Parties: This arbitration clause affects your rights against Manufacturer, RectorSeal and any of their respective affiliates or employees or agents, succes-

sors, or assigns, all of whom together are referred to below as “we” or “us” for ease of reference.

(c)

ARBITRATION REQUIREMENT: EXCEPT AS STATED BELOW, ANY DISPUTE BETWEEN YOU AND ANY OF US SHALL BE DECIDED BY NEUTRAL, BINDING ARBITRATION

RATHER THAN IN COURT OR BY JURY TRIAL. “Dispute” will be given the broadest possible meaning allowable by law, and includes any dispute, claim, or contro-

versy arising from or relating to your purchase of the product, any warranty upon the product, or the product’s condition. It also includes determination of the

scope or applicability of this Arbitration Clause. This arbitration requirement applies to claims incontract and tort, pursuant to statute, or otherwise.

(d) CLASS-ARBITRATION WAIVER: ARBITRATION IS HANDLED ON AN INDIVIDUAL BASIS. IF A DISPUTE IS ARBITRATED, YOU AND WE EXPRESSLY WAIVE ANY RIGHT TO

PARTICIPATE AS A CLASS REPRESENTATIVE OR CLASS MEMBER ON ANY CLASS CLAIM YOU MAY HAVE AGAINST US OR WE AGAINST YOU, OR AS A PRIVATE ATTORNEY

GENERAL OR IN ANY OTHER REPRESENTATIVE CAPACITY. YOU AND WE ALSO WAIVE ANY RIGHT TO CLASS ARBITRATION OR ANY CONSOLIDATION OF INDIVIDUAL ARBI-

TRATIONS.

Page 3 of 3

(e)

Discovery and Other Rights: Discovery and rights to appeal in arbitration are generally more limited than in a lawsuit. This applies to both you and us.

Other rights that you orwe would have in court may not be available inarbitration.

(f) Costs of the Arbitration: Each party is responsible for its own attorney, expert, and other fees unless applicable law requires otherwise. Manufacturer will

pay yourshare of the fees charged by the arbitration organizationand arbitrator(s) beyond the first $200. Where permissible by law, you may be required to

reimburse Manufacturer for the fees of the arbitration organization and arbitrator(s) in whole or in part by decision of the arbitrator(s) at the discretion of the

arbitrator(s).

Filing aClaim

Any claim under this Limited Warranty must be notified to RectorSeal in writing within 30 days following the discovery of the alleged defect accompanied with

(a) proof of purchase including date of purchase; (b)the date andsite of installation; and (c) a description of the alleged defect. You must send yourclaims to:

RectorSeal,LLC

2601 Spenwick Road

Houston, TX 77055

Tel: (713) 263-8001

Email:techservice@rectorseal.com

This Limited Warranty givesyou specific legal rights,and you may also have other rights that vary from state to state or province to province.

Manufacturedby

RectorSeal LLC 2601 Spenwick Drive, Houston, TX 77055, USA 800-231-3345 Fax 800-441-0051 rectorseal.com

A CSW Industrials Company. RectorSeal, the logos and other trademarks areproperty of RectorSeal, LLC, its affiliates or its licensor’s and are protected by copyright, trademark and other intellectual property laws,