Red Arrow LEDPE15-31 User manual

Round LED Panel
Installation Instructions
Red Arrow Trading
Elsworth House, Herries Road South, Sheffield
S6 1QS
T: 0800 195 0006 F: 0870 043 3946
E: [email protected] www.redarrowtrading.com
This installation must be carried out by an electrician.
Please read these instructions carefully before installation.
Leave a copy for the user/maintenance engineer for future reference.
For models: LEDPE15-31, LEDPE15-41, LEDPE15-64,
LEDPWE15-41 & LEDPWE15-64
Specification
• Wattage: 15W
• Voltage: 85-265V 50/60Hz
• Dimensions: Ø 240 x 11mm
• Cut Out Size: Ø 225mm
• Lumen Output: LEDPE15-31: 1117lm
LEDPE15-41 & LEDPWE15-41: 1188lm
LEDPE15-64 & LEDPWE15-64: 1207lm
• CRI: >80
• LED Type: 77pcs of 2835 SMD LED
• Colour Temperatures: 3100K / 4100K / 6400K
• IP40
•
Important Installation Information
•Confirm all products are working before installation.
•There must be at least 100mm distance between the
product and any inflammable material.
•Ensure both high and low voltage electrical cables
are separated.
•The wires behind the lamps can be secured with
cable clips to ensure they are fixed securely.
•After installation, connect the input end of the lamp
to the output end of the switching power supply.
•Connect the LED Panel input to the output of the
power supply, connect the input of the power supply
to the mains. Brown - Live, Blue - Neutral,
Yellow & Green - Earth.
•Do not use the LED driver supplied to power any
other lamps or devices other than the LED Panel
supplied.
Important User Information
•Always switch off the mains supply before servicing,
fitting or maintenance.
General Notice
•Round LED Ceiling light is for indoor use only.
•Before use, please confirm that the Round LED Ceiling Light
has not been damaged during shipping.
•Please keep all packing material away from children.
•Avoid looking directly into the light.
•Do not cover products in any way. Ensure the panel is not
exposed to naked flames, high temperature items, heaters
etc.
•All electrical work installation and maintenance must be
carried out by a qualified electrician.
•When cleaning the product ensure the Round LED Ceiling
Light is switched off and a soft clean cloth is used to clean
any debris away from the fitting. Please do not use any
chemicals on this fitting.

Guarantee
This product is guaranteed for a period of 3 years from the date of purchase. The guarantee is invalid in the case of improper use, tampering, removal of the Q.C. date label, installation
in an improper working environment or installation not according to the current edition of the I.E.E. Wiring Regulations (BS7671). The guarantee is also invalidated if the luminaire has
been Mega tested. Should this product fail during the guarantee period it will be replaced free of charge, subject to correct installation and return of the faulty unit. We do not accept
responsibility for any installation costs associated with the replacement of this product. Your statutory rights are not affected. We reserve the right to alter specifications without prior
notice.
Product complies with
all relevant European
standards
Product is suitable for
mounting on flammable
material
F
Installation Steps as Follows:
1. Drill a hole in the ceiling / wall for installation,
dia = 225mm
2. Place the driver into the ceiling void.
3. Connect AC input of the driver to the mains supply and
DC output to the fitting. The driver should be well
ventilated. Fit the fitting into the hole.
4. Check to ensure the fitting is well fixed and no wires
are trapped between the fitting and the ceiling.
Round LED Panel
Installation Instructions
Red Arrow Trading
Elsworth House, Herries Road South, Sheffield
S6 1QS
T: 0800 195 0006 F: 0870 043 3946
E: [email protected] www.redarrowtrading.com
For models: LEDPE15-31, LEDPE15-41, LEDPE15-64,
LEDPWE15-41 & LEDPWE15-64