SAFETY INSTRUCTIONS
1. Always use the VERTI-DRAIN with the correct tractor as described in the
technical information
2. The user is responsible for a safe Tractor/VERTI-DRAIN combination. The
combination must be tested for noise, safety, risk and easy usage. It is also necessary
to draw up user instructions.
3. The VERTI-DRAIN is suited exclusively to grass fields.
4. Every VERTI-DRAIN user must be fully informed of the information contained in the
user manual.
5. Inspect the ground where the VERTI-DRAIN is to be applied. Remove loose obstacles,
avoid uneven ground.
6. Never step off the tractor if the engine is still running.
7. Ensure that other people are standing at least 4 mtr. (14' ) away from the
VERTI-DRAIN.
8. Use appropriate clothing. Wear strong shoes with a steel inforced toe cap, long
trousers, tie up long hair. Do not have any loose pieces of clothing.
9. Never try to force the VERTI-DRAIN, a situation which is visible in the partial loosening
of the front roller from the ground and unstable behaviour of the
VERTI-DRAIN.
10. Check the VERTI-DRAIN once a week to ensure there are no loose screws or nuts and
bolts.
11. The VERTI-DRAIN may never be used without protection covers and safety stickers.
12. NEVER crawl underneath the VERTI-DRAIN. If you need to work underneath, turn the
VERTI-DRAIN on its front.
13. Always switch off the engine and uncouple the power take off, before starting any
maintenance, adjustment or repair. Also block the VERTI-DRAIN against sinking and
block it against forward/backward movement or sliding.
14. Use only the original VERTI-DRAIN spare parts/ tines in order to ensure the safe
operation of the machine.
15. Never use the VERTI-DRAIN in the dark, in heavy rain, on frozen ground, stormy
conditions or on slopes greater than 20 degrees.
16. Before operating the machine, also read the instructions and the maintenance
information for the power take off. This component has its own certification mark.
17. Maintain a log book of repairs.
18. If any modifications are carried out on the machine the CE certification mark will be
no longer valid. The User/Dealer himself must then have the machine re-certified.
