Redgum RG63LR User manual

redgumbrand.com.au
USER MANUAL
Please read and keep these instrucons
KATIE LEG REST / STOOL
RG63LR
JANUARY 2020

redgumbrand.com.au
REDGUM Brand owns the copyright to the KATIE LEG REST / STOOL user manual.
Any informaon contained in this user manual shall not be photocopied, reproduced or
translated into any other languages without the prior wrien consent of REDGUM Brand.
REDGUM Brand strives to provide the highest quality products possible.
Products are subject to change without noce.
© Copyright REDGUM Brand 2020
REDGUM Brand is part of FOR-DE Group Pty Ltd

redgumbrand.com.au
CONTENTS
1. INTRODUCTION - INTENDED USE
2. PRODUCT OVERVIEW - FEATURES / SPECIFICATIONS
3. ASSEMBLY - UNPACK and INSPECT SUPPLIED PARTS
4. ASSEMBLY - LEG ATTACHMENT
5. SET UP - PLATFORM HEIGHT / ANGLE ADJUSTMENT
6. USAGE GUIDELINES - DO’s + DON’Ts
7. PRODUCT CARE - INSPECTIONS / CLEANING
8. WARRANTY

redgumbrand.com.au
INTRODUCTION
Thank you for purchasing this quality REDGUM Brand product.
If you have any issues or quesons about the KATIE Leg Rest / Stool
please contact your supplier or REDGUM Brand direct:
T: [phone]
F: [phone]
E: [e-mail]
A: 1 Business Way, Malaga Western Australia 6090
INTENDED USE
This product has limitaons and should be used in accordance to these guidelines.
Failure to follow these guidelines may result in damage to the product and injury
to the user. It is the responsibility of the user to ensure the suitability of this product
for its intended use. The user should consult their appropriate healthcare
professional if unsure of the correct product usage for their unique circumstances.
Only use your KATIE Leg Rest / Stool for the purpose for which it is intended, which
is as a plaorm to support a persons legs or as a small stool.
IMPORTANT NOTE: Do not use as a step!
IMPORTANT NOTE
This equipment MUST be assembled
by a competent person.
1.

redgumbrand.com.au
PRODUCT OVERVIEW
FEATURES
Padded Plaorm
Adjustable Height
Can be set at various angles
Vinyl covered upholstery
Epoxy powder coated frame
Plasc leg ps
Strong lightweight construcon
SPECIFICATIONS
(All dimensions shown are nominal)
RG63LRGR: KATIE Leg Rest - GREY
RG63LRBL: KATIE Leg Rest - BLUE
RG63LRM: KATIE Leg Rest - MUSHROOM
RG63LRBR: KATIE Leg Rest - BROWN
Dimensions:
Plaorm Width: 450mm
Plaorm Depth: 380mm
Height: 325 - 475mm (25mm adjustment increments)
Product Weight: 5kg
Maximum Weight Loading: 120kg - evenly distributed
Please contact REDGUM Brand if you would like any further informaon
on your KATIE Leg Rest / Stool.
2.

redgumbrand.com.au
ASSEMBLY- UNPACK and INSPECT SUPPLIED PARTS
Ensure you have been supplied with the following parts:
PARTS:
IMPORTANT NOTE
Check the product for any visible damage. If you see any damage or suspect a fault, DO NOT
USE YOUR PRODUCT and contact your supplier for support.
3.
FASTENERS (Not shown to scale)
6 x SCREW
TOOLS SUPPLIED
- ALLEN KEY
6 x WASHER
1 x PLATFORM
2 x LEG ASSEMBLY
(includes adjustable legs)

redgumbrand.com.au
4.
ASSEMBLY- LEG ATTACHMENT
The KATIE Leg Rest / Stool requires
some assembly prior to use.
Please follow these steps:
1. Posion plaorm with
underside facing up.
2. Line up holes in leg with
holes in plaorm.
3. Using the allen key provided,
x all 6 washers and screws
in place.
IMPORTANT NOTE:
Ensure all screws are ght
prior to using Leg Rest / Stool.
Whilst the Kae Leg Rest / Stool
is upside down, adjust all 4 legs
to the required seng.
(Refer to next page)

redgumbrand.com.au
SET UP- PLATFORM HEIGHT / ANGLE ADJUSTMENT
The KATIE Leg Rest / Stool can be adjusted
in height and angle to suit the users requirements.
To adjust - please follow these steps:
1. Flip Leg Rest / Stool over.
2. Depress the press buon.
3. Move the inner leg to the required seng.
(Tip: Slightly rotate leg to oset
the press buon to stop it from locang
in every hole). The press buon must locate
in one of the holes on the leg.
4. IMPORTANT NOTE:
The head of the press buon
MUST PROTRUDE OUT
of a leg hole to ensure
proper locaon.
5.
PRESS
BUTTON
LOW
Seng
HIGH
Seng
ANGLED
Seng

redgumbrand.com.au
6.
USAGE GUIDELINES - DO’s + DON’TS
Please follow these guidelines to get the opmal benet from your KATIE Leg Rest / Stool.
Failure to follow these guidelines may result in damage
to the KATIE Leg Rest / Stool and put the user at risk.
The KATIE Leg Rest / Stool is designed
to take 120kg Maximum Load (evenly distributed).
Do not overload the KATIE Leg Rest / Stool.
This product is designed
for INDOOR USE only.
IMPORTANT NOTE:
The KATIE Leg Rest / Stool is designed to be used
as a leg support plaorm or as a small stool.
Do not use this product as a step!
Use in conjuncon with a
KATIE High / Low back Chair Use on its own as a Stool

redgumbrand.com.au
PRODUCT CARE - INSPECTIONS / CLEANING
INSPECTIONS
We suggest that you visually check your KATIE Leg Rest / Stool periodically for signs
of damage or wear prior to use. Overall check that no components are loose or worn.
Withdraw the KATIE Leg Rest / Stool immediately if you suspect damage
or any other fault. If in any doubt, please do not issue or use, but
immediately contact your supplier for service support.
IMPORTANT NOTE
Do not t any parts or accessories to your KATIE Leg Rest / Stool that are manufactured
by another company. To do so will void your warranty and may seriously compromise
your safety.
CLEANING
Clean your KATIE Leg Rest / Stool using a non-abrasive cleaner or mild detergent
with a so cloth.
Abrasive cleaners or abrasive cleaning pads could damage the KATIE Leg Rest / Stool
and should not be used.
7.