RedLeaf RLC-BH Series User manual

1

2
INDEX
1. GENERAL INTRODUCTION ...................................................................................................6
1.1. Overview .........................................................................................................................6
1.2. Features...........................................................................................................................6
1.3. SPECIFICATIONS ...............................................................................................................7
1.3.1. Performance .............................................................................................................7
2. STRUCTURE .......................................................................................................................16
2.1. Multiple-function Combination Cable.............................................................................16
2.2. FRAMEWORK AND DIMENSION......................................................................................17
2.3.1. DEVICE-END TO PC-END........................................................................................... 17
2.3.2. PC-END TO THE DEVICE-END ....................................................................................18
2.4. ALARM SETUP................................................................................................................18
3. INSTALLATION ..................................................................................................................20
3.1. Device Installation .........................................................................................................20
3.2. SD Card Installation........................................................................................................20
3.3. Lens Adjustment ............................................................................................................21
3.4. BRACKET ADJUSTMENT..................................................................................................21
4. QUICK CONFIGURATION TOOL .......................................................................................... 22
4.1. Overview .......................................................................................................................22
4.2. Operation ......................................................................................................................22
5. WEB OPERATION .............................................................................................................. 24
5.1. NETWORK CONNECTION ................................................................................................24
5.2. LOGIN AND MAIN INTERFACE.........................................................................................24
6. FAQ ..................................................................................................................................26
APPENDIX TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ................................................27

3
WELCOME
Thank you for purchasing our IP camera! This user’s
manual is designed to be a reference tool for your system.
Please read the following safeguards and warnings
carefully before you use this series product!
Please keep this user’s manual well for future reference!

4
IMPORTANT SAFEGUARDS AND
WARNINGS
1. ELECTRICAL SAFETY
All installations and operations here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra
Low Voltage) and the Limited power source is rated 12V DC in the IEC1-60950.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2. TRANSPORTATION SECURITY
Heavy stress, violent vibration or water splash are not allowed during transportation, storage
and installation.
3. INSTALLATION
Do not apply power to the camera before completing installation. Please install the proper
power cut-off device during the installation connection. Always follow the instruction guide the
manufacturer recommended.
4. QUALIFIED ENGINEERS NEEDED
All the examination and repair work should be done by the qualified service engineers. We are
not liable for any problems caused by unauthorized modifications or attempted repair
5. ENVIROMENT
This series IP camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc. Please keep it away from the electromagnetic
radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation. Do not allow the water and other liquid falling into the
camera. Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding holes of the product are recommended to be grounded to further enhance the
reliability of the camera.
6. DAILY MAINTENANCE
Please shut down the device and then unplug the power cable before you begin daily
maintenance work.
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on
the lens surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water
to dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to
clean the device.

5
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the
camera.
7. ACCESSORIES
Be sure to use all the accessories recommended by manufacturer before installation, please
open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.

6
1. GENERAL INTRODUCTION
1.1. Overview
This series IP camera integrates the traditional camera and network video technology. It
adopts audio and video data collection, transmission together. It can connect to the
network directly without any auxiliary device.
This series RLC uses standard H.264 video compression technology and MJPEG audio
compression technology, which maximally guarantee the audio and video quality.
This series RLC enclosure has the strong resistance capacity, which can guarantee the
proper work performance under heavy strike. It supports real-time monitor and motion
detect function.
It can be used alone or used in a network area. When it is used lonely, you can connect it to
the network and then use a network client-end. Due to its multiple functions and various
uses, this series RLC is widely used in many environments such office, bank, road monitor
and etc.
1.2. Features

7
1.3. SPECIFICATIONS
1.3.1. Performance
Please refer to the following sheet for Red Leaf performance specification.

8

9

10

11

12

13

14

15

16
2. STRUCTURE
2.1. Multiple-function Combination Cable
You can refer to the following figure for multiple-function combination cable information.
See Figure 2-1.
Please refer to the following sheet for detailed information.
Please refer to the follow sheet for detailed I/O port information.

17
2.2. FRAMEWORK AND DIMENSION
Please refer to the following two figures for dimension information. The unit is mm. See
Figure 2-2 and Figure 2-3.
2.3. BIDIRECTIONAL TALK
2.3.1. DEVICE-END TO PC-END
Device Connection
Please connect the speaker or the MIC to the audio input port of the device. Then
connect the earphone to the audio output port of the PC.
Login the Web and then click the Audio button to enable the bidirectional talk function.
You can see the button becomes orange after you enabled the audio talk function. Click
Audio button again to stop the bidirectional talk function.
Listening Operation
At the device end, speak via the speaker or the pickup, and then you can get the audio
from the earphone or sound box at the pc-end.

18
2.3.2. PC-END TO THE DEVICE-END
Device Connection
Connect the speaker or the MIC to the audio input port of the PC and then connect the
earphone to the audio output port of the device.
Login the Web and then click the Audio button to enable the bidirectional talk function.
You can see the button becomes orange after you enabled the audio talk function.
Click Audio button again to stop the bidirectional talk function.
Please note the listening operation is null during the bidirectional talk process.
Listening Operation
At the PC-end, speak via the speaker or the pickup, and then you can get the audio from
the earphone or sound box at the device-end.
2.4. ALARM SETUP
The alarm interface is shown as in Figure 2-4. Please follow the steps listed below for local
alarm input and output connection.
1) Connect the alarm input device to the alarm input port (No.3 pin or No.4 pin) of the I/O
cable.
2) Connect the alarm output device to the alarm output port (No.2 pin) and alarm output
public port (No.1 pin). The alarm output port supports NO (normal open) alarm device only.
3) Open the Web, go to the Figure 2-4. Please set the alarm input 01 port for the first
channel of the I/O cable (No.3 pin). The alarm input 02 is for the 2nd channel of I/O cable
(No.4 pin). Then you can select the corresponding type (NO/NC.)
4) Set the WEB alarm output. The alarm output 01 is for the alarm output port of the device.
It is the No.2 pin of the I/O cable.
Please refer to the following figure for alarm input information. See Figure 2-5.
Alarm input: When the input signal is idle or grounded, the device can collect the different
statuses of the alarm input port. When the input signal is connected to the 5V or is idle, the
device collects the logic “1”. When the input signal is grounded, the device collects the logic
“0”.

19
Please refer to the following figure for alarm output information. See Figure 2-6. Port
ALARM_COM and Port ALARM_NO composes an on-off button to provide the alarm output.
If the type is NO, this button is normal open. The button becomes on when there is an
alarm output.
If the type is NC, this button is normal off. The button becomes off when there is an alarm
output.

20
3. INSTALLATION
3.1. Device Installation
Please follow the steps listed below to install the device. Please refer to Figure 3-1 for
reference.
Please draw the installation holes in the installation surface and then mark three expansion
bolts holes in the surface. Insert three bolts in the hole and secure firmly. Please line up the
installation holes of the bottom of the pendant mount bracket to the installation holes in
the surface. Then insert the three bolts to the holes of the bottom of the bracket. Finally
fasten the device on the installation surface.
3.2. SD Card Installation
Use the inner hex wrench from the installation accessories bag to remove the four inner hex
screws from the rear cover. Please refer to Figure 3-2 to find the SD card slot position. Insert
the SD card and the fix the four screws of the rear cover.
Important
Please make sure the cable connection between the power board and the main board is
firm. Otherwise, it may result in device malfunction.. The rear cover of the device adopts
the waterproof design. Please secure four screws firmly after you complete the SD card
installation.