RedLeaf RLC-DF series User manual

1

2
INDEX
1. GENERAL INTRODUCTION................................................................................ 6
1.1. Overview............................................................................................................... 6
1.2. Features ................................................................................................................ 7
1.3. SPECIFICATIONS..................................................................................................... 8
1.3.1 Performance ..................................................................................................... 8
2. STRUCTURE ................................................................................................ 15
2.1. Multiple-function Combination Cable .................................................................. 15
2.2. FRAMEWORK AND DIMENSION ........................................................................... 16
2.3. BIDIRECTIONAL TALK ........................................................................................... 16
2.3.1. Device Connection......................................................................................... 16
2.3.2. OPERATION................................................................................................... 17
2.4. ALARM SETUP ..................................................................................................... 17
3. INSTALLATION............................................................................................. 18
3.1. DEVICE INSTALLATION ......................................................................................... 18
3.2. SD CARD INSTALLATION....................................................................................... 21
3.3. LENS ADJUSTMENT............................................................................................... 21
STEP 1......................................................................................................................... 21
5. WEB OPERATION ......................................................................................... 23
5.1. NETWORK CONNECTION...................................................................................... 23
5.2. LOGIN AND MAIN INTERFACE .............................................................................. 24
6. FAQ........................................................................................................... 26
Appendix Toxic or Hazardous Materials or Elements................................................ 27

3
WELCOME
Thank you for purchasing our IP camera! This user’s manual
is designed to be a reference tool for your system. Please
read the following safeguard and warnings carefully before
you use this series product!
Please keep this user’s manual well for future reference!

4
IMPORTANT SAFEGUARDS AND WARNINGS
1. ELECTRICAL SAFETY
All installation and operation here should conform to your local electrical safety codes. The
power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the
Limited power source is rated 12V DC in the IEC1-60950. We assume no liability or
responsibility for all the fires or electrical shock caused by improper handling or installation.
We are not liable for any problems caused by unauthorized modification or attempted
repair.
2. TRANSPORTATION SECURITY
Heavy stress, violent vibration or water splash are not allowed during transportation, storage
and installation.
3. INSTALLATION
Do not apply power to the camera before completing installation. Please install the proper
power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
4. QUALIFIED ENGINEERS NEEDED
All the examination and repair work should be done by the qualified service engineers. We
are not liable for any problems caused by unauthorized modifications or attempted repairs.
5. ENVIROMENT
This series IP camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam
device. Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.

5
Do not allow the water and other liquid falling into the camera. Thunder-proof device is
recommended to be adopted to better prevent thunder. The grounding holes of the product
are recommended to be grounded to further enhance the reliability of the camera.
6. DAILY MAINTENANCE
Please shut down the device and then unplug the power cable before you begin daily
maintenance work.
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on
the lens surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the
water to dilute the mild detergent first and then use it to clean the device. Finally use the dry
cloth to clean the device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use
the camera.
7. ACCESSORIES
Be sure to use all the accessories recommended by manufacturer Before installation, please
open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.

6
1. GENERAL INTRODUCTION
1.1. Overview
This series IP camera integrates the traditional camera and network video
technology. It adopts audio and video data collection, transmission together. It can
connect to the network directly without any auxiliary device.
This series RLC uses standard H.264 video compression technology and MJPEG audio
compression technology, which maximally guarantee the audio and video quality.
This series RLC enclosure has the strong resistance capacity, which can guarantee the
proper work performance under heavy strike. It supports real-time monitor and
motion detect function.
It can be used alone or used in a network area. When it is used lonely, you can
connect it to the network and then use a network client-end. Due to its multiple
functions and various uses, this series RLC is widely used in many environments such
office, bank, road monitor and etc.

7
1.2. Features

8
1.3. SPECIFICATIONS
1.3.1 Performance
Please refer to the following sheet for Red Leaf performance specification.

9

10

11

12

13

14

15
2. STRUCTURE
2.1. Multiple-function Combination Cable
You can refer to the following figure for multiple-function combination cable
information. See Figure 2-1.
Please refer to the following sheet for detailed information.

16
2.2. FRAMEWORK AND DIMENSION
Please refer to the following two figures for dimension information. The unit is mm.
See Figure 2-2 and Figure 2-3.
130
165
2.3. BIDIRECTIONAL TALK
2.3.1. Device Connection
Before the operation, connect the active pickup to the audio input port
of the device. Connect the active speaker to the audio output port
of the device. Please make sure the client-end device has the audio
input and output function. For example, you need to connect the
microphone and then earphone to the PC if you want to implement
the bidirectional talk function.

17
2.3.2. OPERATION
Login the Web and click the bidirectional talk button to enable this
function. Click this button again; you can close current bidirectional
talk.
2.4. ALARM SETUP
The alarm interface is shown as in Figure 2-4. Please follow the steps
listed below for local alarm input and output connection.
1) Connect the alarm input device to the alarm input port (No.3 pin or
No.4 pin) of the I/O cable.
2) Connect the alarm output device to the alarm output port (No.2 pin) and alarm
output public port (No.1 pin). The alarm output port 20 supports NO (normal open)
alarm device only.
3) Open the Web, go to the Figure 2-4. Please set the alarm input 01 port for the first
channel of the I/O cable (No.3 pin). The alarm input 02 is for the 2nd channel of I/O
cable (No.4 pin). Then you can select the corresponding type (NO/NC.)

18
4) Set the WEB alarm output. The alarm output 01 is for the alarm output port of the
device. It is the No.2 pin of the I/O cable.
3. INSTALLATION
This series RLC can be put on the table to realize surveillance. Or you can use the bracket or
the in-ceiling installation to realize the hang function. Please refer to the steps listed below.
3.1. DEVICE INSTALLATION
STEP 1
Use the inner hexagonal wrench (provided) to loose the three inner hexagon screws
in the dome cover and then open the cover. The device is shown as in Figure 3-1.
STEP 2
Use the inner hexagonal wrench (provided) to loose the three inner hexagon screws
in the dome and then remove the device pedestal. See Figure 3-2.

19
Draw out the cable exit and four screw holes in the installation position according to
the device pedestal. Dig the four plastic expansion bolt holes and cable exit. Insert
the four plastic expansion bolts into the screw holes
STEP 3
Adjust the camera pedestal to the proper position and then draw the cable through
the cable exit you just dug in the ceiling (wall). Line up the four screw holes in the
device pedestal to the four plastic expansion bolt holes in the installation position.
Put the four self-tapping screws in the device pedestal and then use the screwdriver
to secure the screws in the four plastic expansion bolts firmly.
STEP 4
Adjust the device position and line up the three inner hexagon screws of the device
to the three holes of the installation position. Put the three inner hexagon screws
into the screw holes at the bottom of the pedestal. Use the inner hexagon
screwdriver to fix firmly. Connect the GND to the ground wires to improve stability.
See Figure 3-3 .
STEP 5
Draw out the cable exit and four screw holes in the installation position according to
the device pedestal. Dig the four plastic expansion bolt holes and cable exit. Insert
the four plastic expansion bolts into the screw holes
STEP 6
Adjust the camera pedestal to the proper position and then draw the cable through
the cable exit you just dug in the ceiling (wall). Line up the four screw holes in the
device pedestal to the four plastic expansion bolt holes in the installation position.
Put the four self-tapping screws in the device pedestal and then use the screwdriver
to secure the screws in the four plastic expansion bolts firmly.

20
STEP 7
Adjust the device position and line up the three inner hexagon screws of the device
to the three holes of the installation position. Put the three inner hexagon screws
into the screw holes at the bottom of the pedestal. Use the inner hexagon
screwdriver to fix firmly. Connect the GND to the ground wires to improve stability.
See Figure 3-3.
e) Put the enclose back after you completed the setup.
Please note, the screws in the following figure are the optical adjustment component.
Please make sure it is outward and do not allow it to touch the X-Y-Z axis module. See
Figure 3-5
STEP 8
Put the dome cover back and then put the three inner hexagon screws into the holes
of the device. Use the inner hexagonal wrench to fasten these three screws. See
Figure 3-6