Redrover SDM-080 User manual

SDM-080
User Guide

High Resolution
Stereoscopic 3D Monitor
TRUE3Di
CONTENTS
Parts Included .............................................3
Function for each part and button ............. 5
Installation guide ........................................ 8
Stereoscopic driver installation guide ........ 13
Check list after turn computer on ............. 26

Parts Included

TRUE3Di USER GUIDE
4
※ Parts included and its manufacturer may vary upon subject.
Parts Included
Polarized glassesPower cable and adapter
8 ″Monitor

Function for each part
and button

TRUE3Di USER GUIDE
6
① Power button : turn on and off monitor
② Menu / Exit button : Open menu window or when menu window is already open,
exit current menu and return to previous menu selection
③ Sel/ Auto button :
☞ Auto adjust function - PC mode
☞ Execute selection when pressed when menu window is already open
④ CH (+) button :
☞ Move up selection when menu window is already open or increase value or
parameter of selection
Function for each part and button
INPUT CH(+) CH(-) SEL/AUTO MENU POWER 3D MODE
Corresponding buttons are on front of the bottom part
1. Function for each button

Function for each part and button
7
⑤ CH (-) button :
☞ Move dwon selection when menu window is already open or decrease value or
parameter of selection
⑥ Input button : Change the input type
(PC, Component(YPbPr), RGB, Composite Video, S-Video, TV input)
⑦ Component (YPbPr) : Component Input
⑧ Composite : Video Input
⑨ RGB : Conventional connection cable to graphics card from computer
⑩ S-video : S-Video Input
⑪ Power : Power cable
POWER
RGB
S-VIDEO
Composite
Component

Installation guide

Installation guide
9
Monitor and computer image which would be shown
throughout this manual for the installation of monitor.
Front image of a monitor and a computer
Rear image of a monitor and a computer
Front image of back panel. Graphics card shown at the bottom
( For the specification of our monitor, graphics card must be compatible with “Dual output”)
(Images for computer shown here may differ from each user’s computer.)

TRUE3Di USER GUIDE
10
1) When using 2 RGB-RGB cables to connect from computer to monitor
2) When using 2 DVI-RGB cables to connect from computer to monitor
① Connect left DVI port from computer to left RGB port from monitor using RGB-
RGB cable with gender. Connect right DVI port from computer to right RGB port
from monitor using RGB-RGB cable with gender.
① Connect left DVI port from computer to left RGB port from monitor using DVI-
RGB cable. Connect right DVI port from computer to right RGB port from monitor
using DVI-RGB cable.
1. For Dual DVI output graphics card