Redrover True3Di SDM-080 User manual

SDM-080
SDM-080 SDI
User Guide

2

High Resolution
Stereoscopic 3D Monitor
CONTENTS
True3Di is ...................................................4
Hazardous parts .........................................6
Included Parts .......................................... 12
Button functions description ..................... 14
OSD settings & Monitor Menu settings ...... 19
Trouble shooting ........................................ 29
3

4
True3Di

True3Di USER GUIDE
5
SPECIFICATION
Model SDM-080 SDM-080 SDI
Aspect ratio WVGA WVGA
Resolution 800 X 480 800 X 480
Active Display area
(mm, typ.)
176.64(H) * 99.36(V) 176.64(H) * 99.36(V)
Pixel Pitch(mm) 0.2208(H)*0.2070(W) 0.2208(H)*0.2070(W)
Brightness (nits) 400cd/㎡ 400cd/㎡
Contrast Ratio(typ.) 400 : 1 400 : 1
Color number 262k 262k
Response Time(ms) 10 10
Viewing angle (vertical) 40/50 40/50
Viewing angle (horizontal) 60/60 60/60
Dimensions(WxHxD)(mm) 231 X 208 X 324.8 231 X 208 X 324.8
Input Signal DVI-D,Composite, Component DVI-D, SDI In, SDI Out
Weight(Kg, lbs) 4.5Kg, 9.9lbs 4.5Kg, 9.9lbs
We appreciate users who decide to use True3Di products.

6
Hazardous Parts

True3Di USER GUIDE
7
● Do not dismantle, fix or and modify the product.
▶ It may cause a fire and/or electric shock.
● Disconnect the power cable from outlet and Contact technical support
when the monitor makes unusual noises or smoke.
▶ It may cause a fire and/or electric shock.
● Do not install or place the monitor near oily, smoky, humid or wet
environments. Do not install or place the monitor inside vehicles.
▶ It may cause a fire and/or electric shock.
● Disconnect the power cable from the outlet and contact technical
support when the monitor has been dropped, fallen or damaged.
▶ It may cause a fire and/or electric shock.
Warnings relating Power
※ Caution
● Graphic card
▶ Quadro FX series for Open GL Stereo Software
▶ Geforce 6000 and 7000 series for DirectX Stereo Software
● As using two graphic cards
▶ Please use the same graphic cards for the Quadro FX series, If different
versions of the graphic cards are used, the 3D stereo will not work properly.
● Insertion of a second flat LCD Monitor
▶ Currently, True3Di uses the TN type LCD monitors, so please use of a IPS or S-PVA
type monitor for the second flat LCD monitor is recommended. It will be more
comfortable to use monitor without being blocked.

True3Di USER GUIDE
8
● Disconnect the power cable from the outlet when lightning or thunder
is occuring nearby.
▶ It may cause a fire and/or electric shock.
● Do not drag or move the monitor in any direction holding only the
power cable or any other cables only.
▶ It may cause damage on cables and cause a fire and/or electric shock.
● Do not use damaged or loose cables to power the monitor.
▶ It may cause a fire and/or electric shock.
● Do not touch cables with wet hands. Do not pull the power cable by
holding the cable.
▶ It may cause a fire and/or electric shock.
● Connect the cable with a ground plug.
▶ It may cause an electric shock.
● Connect the power cable firmly and fully inserted.
▶ It may cause a fire.
● Do not bend the cable with force. Do not put heavy articles on top of
the cable.
▶ It may cause a fire and/or electric shock.
● Do not use more than one extension cord from one outlet.
▶ It may cause a fire.

True3Di USER GUIDE
9
● Do not install or place the monitor at the edge of a shelf. Make sure
the monitor is installed or placed fully inside the given space.
▶ It may drop or fall to cause damage or serious injury.
● Do not install or place the monitor where the given space is smaller
than the monitor or on unstable space.
▶ It may drop or fall to cause damage or serious injury.
● Do not install or place the monitor in common areas.
▶ It may cause distractions, damage or serious injury.
● Do not install or place the monitor close to any type of fire or
flammable/combustible articles.
▶ It may cause a fire or explosion.
● Do not install or place the monitor close to any type of high heat
generating article or device.
▶ It may cause a fire and/or electric shock.
● Do not install or place the monitor in a closed space.
▶ It may cause a fire.
● Handle the monitor gently with care.
▶ It may cause damage.
Warnings relating installation

True3Di USER GUIDE
10
● Install or place the monitor at least 10 cm (5 inch) from the wall for
optimum level of ventilation.
▶ It may reduce or damage the life of the parts or the board.
● Disconnect the power cable and other connected cables if connected
from the outlet and the monitor when removing the monitor to different
locations.
▶ It may cause an electric shock.
● Do not place any type of articles which contains chemical properties,
metal products, or wet articles in the monitor.
▶ It may cause a fire and an electric shock and damage the monitor.
● Do not insert or put any type of metal articles and any type of
flammable articles inside or on any input ports of the monitor.
▶ It may cause a fire, electric shock and serious injury.
● Afterimages may remain on the screen when identical images are
being shown for a long period of time.
▶ Make sure to apply power saving mode or screen saving mode.
Warnings related to usage