Redsbaby ARBOUR User manual

REDSBABY.COM.AU

PRODUCT GUIDE

PRODUCT GUIDE

For Your Journey
We are committed to innovating,
crafting and bringing to life the best
in baby products and experiences.
Our products are designed in Australia for
our unique lifestyle. They are as functional
as they are beautiful, serving our core
purpose to enrich your family journey.
REDSBABY.COM.AU

How-to and assembly videos
available at redsbaby.com.au
Scan to Watch
PRODUCT GUIDE

Contents
General Instructions 9
Product Care 10
Safety Standards 11
Warnings and Safety Precautions 11
Getting to Know Your ARBOUR Cot 13
Configurations Based on your Child's Age 14
Components in Your Package 16
Assembly Instructions 18
Installation of Safety Bolts 19
High Position 22
Low Position 29
Toddler Bed 34
Understanding Your Warranty 38
36 Month Warranty 38
Claim Validity 40
Warranty Promise 41
Company Information 42
REDSBABY.COM.AU

PRODUCT GUIDE

Embrace
Your Journey
General Instructions
This document contains
important information and must
be kept for future reference.
Please read thoroughly before
using your Redsbaby ARBOUR
Cot. Incorrect use can be
dangerous and result in serious
injury or even death.
There may be slight variations
in the design of your product to
that shown in the images of this
instruction manual.
Only use the Redsbaby ARBOUR
Cot for children aged between
0-5 years old.
9REDSBABY.COM.AU

Product Care
General Maintenance
• Wipe down with a damp
cloth and use a mild soap
solution if necessary.
• Do not use abrasive cleaners.
• Ensure the furniture is
located or stored in a clean
and dry place.
• Avoid direct sunlight.
• Do not scratch or chip the
wood finish.
• Check metal hardware before
assembly and periodically
during use, for any signs of
damage or wear and tear.
• Contact Redsbaby for
replacement parts, do
not substitute parts.
10 PRODUCT GUIDE

IMPORTANT! READ
CAREFULLYAND
KEEP FOR FUTURE
REFERENCE.
Please follow the assembly instruction in detail to ensure the
safety features of the cot are not compromised.
Safety Standards
Redsbaby ARBOUR Cot is designed to comply with the safety
requirements of AS/NZS 2172:2013 and CPN No.6 of 2005.
Warnings and
Safety Precautions
WARNING: TO PREVENT
FALLS, THE MATTRESS BASE
OF THIS COT SHOULD BE
ADJUSTED TO THE LOWEST
POSITION BEFORE YOUR
CHILD CAN SIT UP.
REDSBABY.COM.AU 11

WARNING: TO PREVENT
FALLS, THE MAXIMUM
MATTRESS THICKNESS
SHOULD NOT EXCEED 150mm.
WARNING: TO PREVENT
SUFFOCATION AND FALLS,
THE RECOMMENDED
MATTRESS SIZE SHOULD BE
690mm WIDE x 1300mm LONG
and 125mm THICK.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which
measures 690mm wide by 1300mm long and 125mm in thickness.
The width and length are specied because it is important that the
gaps between the mattress and the sides and the end of the cot will
not exceed 40mm when the mattress is pushed to one side or end,
and 20mm when the mattress is centered in the cot. The thickness of
the mattress has been specied to ensure that the depth of the cot is
greater than 500mm with the mattress base in the lower position to
minimize the risk of a child climbing or falling out of the cot.
Please ensure the cot is placed at a reasonable distance from curtains,
blinds, heaters, and power points.
Please keep medication, string, elastic, small toys or small items, such
as money, out of reach from any position in the cot.
PRODUCT GUIDE12

Getting to Know
Your ARBOUR Cot
13REDSBABY.COM.AU

Configurations
Based on Your
Child's Age
14 PRODUCT GUIDE

Cot - High Position
Use until your child can sit
up unaided (approximately
5-8 months old).
Cot - Low Position
Use until your child is ready
to transition to a toddler bed
(approximately 18-36 months old).
Toddler Bed
Use until your child
is 5 years old.
15REDSBABY.COM.AU

Components in
Your Package
1 Mattress base
2 Long side panel x2
3 Short side panel x2
4 Toddler bed conversion
5 Allen Key
6 Bracket kit for low position and
toddler bed conversion (K)
7 Screw (A) x8
8 Dowel (B) x4
9 Screw (C) x4
10 Safety bolt (D)* x4
*You cot will come with 4 x Safety bolts (D) assembled
in the low position of the 2 x long side panels (2).
The 4 x Safety bolts (D) must always be assembled
on your cot. This is an important safety requirement
to avoid finger entrapment
16 PRODUCT GUIDE

A
C
C
D
K
1
3
7
8
9
10
2
4
5Ax8
Bx4
Cx4
Dx4
K
Kit includes:
2x L Brackets
4x L Bracket Screw
6
17REDSBABY.COM.AU

Assembly
Instructions
18 PRODUCT GUIDE

Installation
of Safety Bolts
Assembly Instructions
1 Your cot will come with 4 x safety bolts (D) assembled
in the low position of the long side panels on your cot.
IMPORTANT: The 4 x safety bolts (D) must always be
assembled on your cot. This is an important safety
requirement to avoid finger entrapment.
High Position
When the mattress base is in the high position,
the 4 x safety bolts (D) must be assembled in
the low position of the long side panels.
D
D
D
D
Dx 4
19REDSBABY.COM.AU