Redtiger T700 User manual
WARNING: Be careful when using your
camera and its accessories. Always be
caution of your surroundings to avoid
injuring yourself and others.
Make sure to follow all local laws
including all privacy laws which may
restrict recording in certain areas.
Meet your T700
T700 Power Tools
Setting Up Your Camera
Customizing Your T700
Installation
GPS Player ( PC )
Customer Service
Product Information 1
2
3
4
6
11
17
20
MAINTEN YOUR CAMEAR
Do not directly plug and unplug the cable or
SD card, please perform related operations
after camera off.
We do not encourage you connection your
camera with other hardwire kit, but if you insist
to do this, please have a look of those lower
than 6V and higher than 2.5A.
Do not expose to the sun for a long time is the
best, camera will heat on during its working,
any damaged by high temperature will be
added to 1 year free replacement warranty.
T700-Redtiger
Product Information
Product Information
Item Name
Model
Screen Size
Power Interface
Battery
Display Resolution
Recording
Resolution
Front Camera: 3840*2160P,
2560*1440P, 1920*1080P
Rear Camera: 1920*1080P
Loop recording
Recording
method
Screen View
Video Format
Memory Card
11" Stream Media Dash Camera
REDTIGER T700
11" IPS Touch Screen
Type C 5V/3A
Super capacitor
1920x1080P
1/2/3 mins
Normal recording/
Emergency recording
Front + Rearview/
Front view/ Rearview
Video: TS; Still image: JPG
Micro SD card 32G ~ 128G U3
GPS
G-sensor
Audio
Storage
Temperature
Operating
Temperatue
Yes
3 Axis G-sensor
Support sound
recording and
playback
-22°F~ 176°F
-4°F ~ 158°F
1
2
T700
GPSTYPEE-C TFAV-IN
Front Camera
Power Supply
Port
Rear Camera
Port
Micro
SD Card Slot
GPS Port
Fasteners
Screen
Power Button
Record the front
view of the vehicle
Connect the car
charger
Connect the rear view
camera
Insert a Micro SD card
(maximum support 128G)
Connect the GPS receiver
Please use the included
silicone straps
11 inch IPS touch screen
Short press to turn off
the screen, long press to
turn off the power
1
2
3
4
5
6
7
8
3
T700 T700
2. Hardware Kit
(Needed for Parking Mode)
(Not Included, Purchase
Separately)
Speed & Driving Direction: Once GPS is connected,
the information will show
Screen Brightness Adjustment: Slide the bar left and
right to adjust the screen brightness
Settings: Touch to enter the menu setting
File Playback: Playback the video & Photo
Start/ Stop Recording
Front / Rear View Switch: Switch between front view & rear view
Snapshot: Take a Snapshot
Emergency Lock: Lock videos as event files so it won't be
overwritten by loop recording
Recording Status: Yellow flashing
means Lock Recording
Date & Time
Show SD card status
Audio Record is on
Loop Time：Adjust the loop
recording duration
(1Min/2Min/3Min)
4
BL
BL
00:14 AM
2022-07-27 Wed.
:
AM
2022-07-27 Wed.
:
While recording, swiping the
screen up and down adjusts the
angle of view.
While recording, swipe the screen left
or right to switch between front view,
rear view, or split-screen view.
Touch the touchscreen to diaplay
the brightness scrollbar at the
upper center, then slide right or
left to adjust the brightness.
5
00:14
AM
2022-07-27 Wed.
:
00:14
AM
2022-07-27 Wed.
:
BL
00:14
AM
2022-07-27 Wed.
:
With your camera off, insert the SD card into the
card slot with the label facing the back of your
camera.You can eject the card by pressing it into
the slot with your fingernail.
SD CARD
WIRING SET UP
Connect your camera to a Cig charger using the
included cig charge cable.
You'll need a micro SD card (sold separately) to
save your videos and photos. Use a U3 Class 10
SD
T
MCard dedicated or your camera may
malfunction.
SD cards can degrade over time and affect your
camera's ability to save your media. Try swapping
out an older card for a new one if you're having
any problems.
Step 2: Pull out the front lens of the T700 dash cam
to match the rearview mirror of the vehicle.
Step 3: Extend the straps around the back of the
rear-view mirror and attach them to the bottom
retaining hooks.
Route your rear camera's
power cable to the front
of the car.If you'd like,use
a trim removal tool to
pop out the headlining
panel directly above your windshield.Then,run
you cable through the exposed chamber.
Installation
6
Installation Installation
We recommend install the rear camera above
the license plate.
Fix camera with screws
Find a best location, use screws
to fix the rear camera near by
thecarlicenseplate lamp.
Remove the Panel
Remove the inner panel of the
trunk to expose the rear wiring
compartment of the car.Open
the trunk and look for a sturdy inner panel covering
the other side of the license plate installation area.
Then,insert a decorative removal tool or another
thin device behind the panel and pry it apart.
Snake the cable
Use a trim removal tool to pop
out tailgate trim, then run the
cable from outside of the car
into the trunk of your car.
Connect the rear cameras
power cable to the extension
cable.After snaking your rear
camera's extension cable,
connect the power cable to
your rear camera's extension
cord.
※If you need to install a trigger cable to activate
the reversing guidelines, please find the positive
cable of the reversing lamp, or ask a
professional for help.
PLACEMENT OF REAR LENS INSIDE CAR
We suggest to install outside car, not inside
Step 1: Confirm the accessories
1 pc mount bracket (2 pcs black iron sheets)
4 pcs screws (2 pcs small screws, 2 pcs large screws)
7
Installation Installation
Step 2: Place a iron sheet over the rear camera, aim it at
the hole, and screw it on.
Step 3: Join the two iron sheets
together and turn on the screws.
Step 4: Stick the bracke
to the rear windshield
with 3M glue.
PLACEMENT OF REAR LENS OUTSIDE CAR
We suggest to install outside car, not inside
Step 1: Tear off the release paper of 3M sticker on Rear
lens.
Step 2: Paste the rear lens directly above the license plate.
1 2 3 4
How to install
the GPS
GPS front and back
Installation location
Position 1: Considering that the front windshield of
a motor vehicle has a large enough view of the sky,
it is usually recommended that the GPS module be
placed in the central console. At the corners of the
central console and the edge of the windshield,
after adopting hidden wiring, they are fixed with
double-sided tape.
8
Installation Installation
Considering the use effect and installation
convenience, we usually recommend customers to
install it at position 1. Of course, you can also try to
install it in other locations for testing, and choose
the location you think is most suitable.
1) Install the GPS Antenna onto the camera, the
GPS Antenna will start to search for a GPS signal.
2) Once the GPS is installed, the GPS icon on the
home screen will show. After the GPS signal has been
received, it will show direction and speed.
(Prerequisite: "GPS Disp" in the settings is turned on)
Q: Why is my GPS not working? /How to use GPS ?
A: If you cannot receive the signal after inserting the
GPS, please follow the steps below.
1 The vehicle must be within a large area.
2 Insert the GPS plug again.
3 Place the GPS plug upward.
4 Restart
5 It will be recognized after about 40 seconds.
If still cannot receive the signal, it may be a GPS
problem. Please CONTACT US and we will help you
solve this problem.
9
BL
00:14 AM
2022-07-27 Wed.
:
Installation Installation
PREPARE YOUR HARDWIRE KIT
GETTING TO KNOW YORU HARDWIRE KIT
INSTALL YOU HARDWIRE KIT
Since we considered some customers have no
need of Parking Mode, there’s no hardwire kit
included in your packages. You could refer this line
of words to contact us to get a free hardwire kit.
Features:
> Low Voltage Protection
> Multi Input Power
> Universal Compatibility
> Length: 11.5ft
Red wire
Yellow wire
Black wire
POP-UP: You could usually find your fuse box under the
trunk or steering device.
You could cut the head of wires and connect it to your
fuse directly if your fuses is small.
>> ACC >>> power off along the car
>> B+ >>> never power off
>> Ground e.g. screw
10
WARNING: Wrong connection may disable
Voltage Protection and damage your car.
Customizing Your T700 Customizing Your T700
If you turn on the engine (ACC on) while the cigar
power adapter is connected,the power will be
turned on automatically and the opening screen
will be displayed.
Press and hold the power button to turn off the
power during startup,and then briefly press the
power button again to turn on the power of the unit
and display the opening screen.
Briefly press the power button to turn off the screen.
Power ON/OFF
Menu Settings
After powering ON the camera, press the button
to enter the setup process.
11
BL
00:14 AM
2022-07-27 Wed.
:
AM
2022-07-27 Wed.
:
Function Function Description Function
Options
Adjust the brightness
of the rear camera
Adjust the video
recording resolution.
Adjust the loop
recording duration.
Turn On/Off audio
recording.
Movie Clip
Time
Sound
Record
Rear camera
brightness
adjustment
Resolution
On/Off
1munite/
2minutes/
3minutes
High/Middle/
Low
2160P+1080P
1440P+1080P
1080P+1080P
Customizing Your T700 Customizing Your T700
12
Function Function Description Function
Options
AM
2022-07-27 Wed.
:
When this setting is
turned off, the time is
not displayed when in
therecording interface.
Set the common
language, the default
is English.
/
Set the status of the
screen display when
recording.
Flicker
Screen saver
Time always
on
Language
Off: The screen
is always on.
1min/2min/3min:
Automatically close
the screen.
50Hz
60Hz
On/ Off
Latviešu
AM
2022-07-27 Wed.
:
Function Function Description Function
Options
Adjust the sensitivity
of G-sensor ,it is
recommended
to adjust to "Low".
The mode displayed
on the screen
Adjust the volume
No need to set it by default.
If you need to set it manually,
please turn off the GPS to
automatically set the time
before setting it.
Volumn
setting
Clock
Settings
G-Sensor
sensitivity
Default
booting
display
/
/
Off/Low/
Medium/
High
Split Screen/
Front camera/
Rear camera
Customizing Your T700 Customizing Your T700
13
AM
2022-07-27 Wed.
:
Function Function Description Function
Options
/
Time Zone
Set the vehicle speed
display mode.
If you stay in other
interface and forget to
record video, it willforce
to start recording.
Speed Unit
Forced
recording
Time style
Time zone
On/Off
km/h/mph
24H Time style/
12H Time style
UTC -08:00
AM
2022-07-27 Wed.
:
/
Flip the recording
horizontally.
Flip the recording
direction up and
down.
mirror flip of
rear image
Upside down
of rear image
Locked
video loop
Daylight
Saving Time
On/Off
On/Off
Off/On
Off/On
The principle of the loop
recording function is to only
overwritethe unlocked normal
video to record a new video. If
you want tolock the video to be
covered as well, please turn on
this function.
Function Function Description Function
Options
14
Mirror Image
Rear Image
Customizing Your T700 Customizing Your T700
AM
2022-07-27 Wed.
:
Function Function Description Function
Options
All setting will be
deleted
/
Adjust the reversing line
Show
reversing
line
Reversing
line
Format
SD-Card
Reset Setup
/
Off/On
OK/Cancel
OK/Cancel
This feature will allow
you to format inserted
memory card, all
thedata will be deleted.
Customizing Your T700 Customizing Your T700
If your car does not have a reversing system and
you need a backup reversing system as an aid, you
need to connect the red cable of the rear cam to
the positive pole of your reversing lamp. If your car
already has a reversing system, you just ignore the
red cable onthe rear cam.
When you shift to "r" gear, the rear view will
automatically showon the screen with reversing
lines for easy and safe parking. Youcan enter the
"Reversing line" option in the settings, then adjust
the angle of the reversing image and the reversing
line.Also when inreversing, you can adjust the
viewing angle of the image. (This function activate
after the red wire of the rear camera be
connectedto the positive pole of the reversing
light.)
NOTE
15
AM
2022-07-27 Wed.
:
Function Function Description Function
Options
Check the GPS signal
reception details.
(Number, Time,
Longitude, Latitude)
Check the product
model and firmware
version.
GPS
Information
Product
Information
/
/
Customizing Your T700 Customizing Your T700
Playback Mode
Playback menu
CAUTION
When you turn on the power, the dash cam
will start recording automatically. Click to
enter the playback mode.
The front-view video and the rear-view video are
displayed in different file lists.
You need to click to switch between the
front-view video list and the rear-view video list.
16
9/30
CH1-20220727-012123
CH1-20220727-012029
CH1-20220727-012423
CH1-20220727-012723
00:00 00:00
5 6
1
2
3
4
7
8
9
1. Loop recording files
3. Snapshot files
5. List of video files
7. Delete specified file
8. Lock/Unlock specified file
2. Locked video files 6. Play/Pause
9. View videos on fullscreen
4. Switch the front view or
rearview video file list
Other manuals for T700
1
Table of contents
Other Redtiger Dashcam manuals
