Regency 600DR2015 User manual

REGENCYREGENCY
Space SolutionsSpace Solutions
5” DRAWER
W/ STAINLESS STEEL FRONT
600DR2015 • 600DR2020
The included z brackets make this drawer simple to install. This unit is compatible with 24” and 30”
deep Regency tables that are at least 36” long. Improper installation voids any warranty.
• If you bought your table and drawers at the same time, install the drawers before you assemble the
table.
• If you are mounting drawers to an existing table, you can easily remove the tabletop by using an allen
wrench to unscrew the legs from the tabletop’s gussets and lifting it off.
NOTE Set the tabletop upside down on a surface that won’t scratch it before assembling the drawer.
INSTALLATION GUIDE
EASY TO INSTALL
PRIOR TO INSTALLATION
02/2020

INSTALLING THE DRAWER
DO NOT ATTEMPT TO
INSTALL DRAWER WITHOUT
DISASSEMBLING TABLE FIRST.
REGENCYTABLESANDSINKS.COM
1
2
Assemble the table
undershelf and legs.
Attach “Z” clip to drawer frame with screws.
Drill holes on the hat channel and then attach the “Z” clip to the hat
channel with screws.
4Attach the top shelf to the table undershelf and legs.
3 (Optional)