page 09
Operation Controls
and Functions
No. Name Function Description
1. Power button
▪ Short press this button to power on the device.
▪ Long press this button for 1 seconds to enter the standby mode.
2. POWER LED
The Power LED will light in green when the product is powered
on, and red when the product is on standby.
3. IN LED
(1~2)
Input signal indicator lights. When the HD 1/2 port connects an
active source device, the corresponding green LED will be on.
Note: Only the LED of the selected input channel will light in
green on single screen display mode; all LEDs will light in
green on multiview mode.
IR signal receving window.
5. INPUT button
Input source switching button, only available on single screen
display mode.
6. Multiview
button
Multiview display mode switching button.
▪ Short press this button to circularly select:
SINGLE - PIP - PBP (1) - PBP (2) .
▪ Long press this button for 3 seconds to select the aspect ratio
for PBP (1) / PBP (2)
7. RES button
Output resolution switching button.
▪Short press the RES button to circularly switch the output
resolution of the HDMI OUTPUT port (Please refer to th output
resolution list of “8. Video & Audio”).
▪Long press the RES button for 3 seconds to switch the output
resolution to 720P60.
