Rejuvenation A3119 User manual
1
OUTDOOR SPEAKERS
INSTALLATION INSTRUCTIONS
2
1 2 3
4 5
OUTDOOR SPEAKERS
1. Run wire pigtail from speaker through the mounting
hole in the top of ground stake
2. Place stake into desired position and insert into ground
until flange of stake is flush to grade.
3. Thread 1/2” NPT into stake until secure and tight.
4. Strip the (2) leads from the speaker pigtail wire and
secure white wire from speaker to positive on cable and
black wire from speaker to negative on cable.
5. Secure with silicone wire nuts for outdoor applications.
6. See pages 4-5 for diagram installation images
3
1
1. Mark holes on the wall for placement of the back plate
and drill out the center hole on back plate to feed cable up
through wall to connect to speaker wire. Ax back plate
to wall with anchor and screws for top and bottom holes.
2. Strip the 2 leads from the speaker pigtail wire and secure
white wire from speaker to positive on cable and black wire
from speaker to negative on cable (secure with silicone
wire nuts for outdoor applications)
3. Push cabling back in the wall and place speaker mount on
backplate.
4. Use provided small screws to ax the speaker mount to
the back plate at top and at bottom.
2 3
4
WALL MOUNTED OUTDOOR SPEAKERS
4
2107 Chico Avenue South El Monte, CA 91733 800-414-5109
Red = Positive Black – Negative
Wiring Diagram for Big Boy
L R L R
LV-500A
LV-SRT
INSTALL INSTRUCTIONS FOR SPEAKERS DIRECT TO AUDIO EQUIPMENT.
5
2107 Chico Avenue South El Monte, CA 91733 800-414-5109
Red = Positive Black – Negative
Wiring Diagram Li’l Buddy
L R
INSTALL INSTRUCTIONS TO A WIRELESS AUDIO SYSTEM
This manual suits for next models
5
Table of contents
