Remington B3 Style Series User manual

B3 Style Series
Beard Trimmer
I www.remington.co.uk
MB3000
Register online for an EXTRA year guarantee
Visit uk.remington-europe.com/product-registration You must register within 28 days of purchase.

j
g
k
i
f
e2x
AAA

3
Thank you for buying your new Remington® product. Please read these instructions
carefully and keep them safe. Remove all packaging before use.
IMPORTANT SAFEGUARDS
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been supervised/instructed and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be done by children
unless they are older than 8 and supervised. Keep the appliance and cable
out of reach of children under 8 years.
• The body of this appliance is not washable or water resistant. Do not put
the appliance in liquid.
• Do not use this product if it is not working correctly, if it has been dropped or
damaged, or dropped in water.
• Do not use attachments other than those we supply.
• This appliance is not intended for commercial or salon use.
PARTS
1. On/O switch
2. Zoom wheel
3. Length position indicator
4. Battery compartment
5. Trimmer assembly
6. Adjustable comb
Not shown:
• Pouch
• 2 x AAA batteries
GETTING STARTED
BATTERIES
• Your beard trimmer requires 2 AAA alkaline batteries (rst set included).
• Turn the appliance o.
• Open the battery compartment by pressing in the ridged areas and pulling
downwards.
• Insert batteries so that the (+) and (-) marks on the batteries face the same marks in
the battery compartment.

4
• Remove the batteries if the unit is not in use for long periods.
• Non-rechargeable batteries are not to be recharged.
• Dierent types of batteries or new and used batteries are not to be mixed.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the appliance and safely disposed of.
• The supply terminals are not to be short-circuited.
INSTRUCTIONS FOR USE
FITTING THE ADJUSTABLE COMB
• Hold the trimmer in one hand with your thumb rmly on the zoom wheel
to prevent it from turning. Ensure the length position indicator is at 0.4.
• Slide the comb down the grooves until it clicks into place.
• The comb can only be attached one way.
ADJUSTING THE TRIM LENGTH
• The trimmer comb can be adjusted to give you 17 dierent trim lengths
simply by turning the wheel to the desired setting.
• Select the comb length by rotating the zoom wheel upwards to increase
the length and downwards to decrease the length. Please see the table
below for the dierent length increments.
• The wheel will click into place as it reaches each setting and the setting
number will appear on the length position indicator.
Setting Cutting Length
0.4 0.4 mm
1 1 mm
1.5 1.5 mm
2 2 mm
2.5 2.5 mm
3 3 mm
3.5 3.5 mm
4 4 mm
4.5 4.5 mm
5 5 mm
6 6 mm
8 8 mm
10 10 mm

5
Setting Cutting Length
12 12 mm
14 14 mm
16 16 mm
18 18 mm
Note: trimmer comb must be attached to the product in order to use the hair length
selector.
TO THIN AND TAPER THE BEARD/MOUSTACHE
1. Fit the adjustable comb.
2. Use the zoom wheel to set the comb to the desired length setting.
3. The setting will appear on the length position indicator. If you are trimming for the
rst time start with the maximum trimming length setting.
4. Turn the unit on.
5. Place the at top of the trimmer comb against the skin.
6. Slowly slide through the hair. Repeat from dierent directions as necessary.
7. If hair builds up in the trimmer comb during the trimming process, switch the unit
o, pull the comb and brush the hair o.
Note: Use the beard trimmer without the adjustable comb for trimming hair close to the
skin. This will trim hair to 1mm, holding the blades perpendicular to the skin will trim hair
to 0.4mm.
TRIMMING THE NAPE OF YOUR NECK
Note: you will need a hand mirror for this operation if performing it alone.
1. Remove the adjustable comb.
2. Use your ngers to lift the hair at the base of your head up o the neck. Your index
nger should be covering the roots of the hairs you are lifting to prevent accidental
removal by the beard trimmer.
3. Using your other hand, hold the trimmer to the base of your neck with the cutting
unit facing up and move the trimmer up the length of the neck until it touches your
nger covering the hair roots at the base of your head.
4. Be sure to move the unit slowly when performing this operation and to keep the
roots at the base of your head out of the way of the trimmer.
TO DEFINE THE BEARD/MOUSTACHE LINE
1. Hold the trimmer with the trimmer blade facing you.
2. Start with the edge of beard/moustache line and gently lower the trimmer blade
onto your skin.
3. Use motions towards the edge of the beard/moustache line to trim to desired
locations in facial area and away from beard in neck area.

6
BLADE RELEASE
1. Ensure the trimmer is switched o.
2. Remove the adjustable comb.
3. Remove the blades by pushing your thumb upwards under the blades and move
the blade set away from the trimmer body.
4. To reattach the blades, align the back of the blades with the back housing at the
top of the trimmer and push down until the blade set clicks into place.
TIPS FOR BEST RESULTS
• Beard, moustache and sideburn hairs should be dry.
• Avoid using lotions before use.
• Comb your hair in the direction that it grows.
• Remove the adjustable comb if you are dening hairline edges such as sideburns,
trimming the nape of your neck, or trimming your beard line on front of neck.
CARING FOR YOUR TRIMMER
• To ensure long lasting performance of the trimmer, clean the blades and unit
regularly.
• Do not use harsh or abrasive cleaners on the unit or blades.
• This product has washable blades. Ensure the blades are detached from the
trimmer before washing the blades.
• Wash the blades under a running tap to remove any hair clippings.
• After rinsing under a tap ensure the blades are dry.
• Please note the main body of the trimmer is not washable and should be kept away
from water.
• After each use, it is recommended to clean hair from the blades either by rinsing the
blades or using a cleaning brush.
• We recommend that you oil the blades regularly. Add a few drops on all gliding
surfaces, the cutting area and back pads of the blades.
RECYCLING
WTo avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate ocial recycling/
collection point.

7
SERVICE AND GUARANTEE
Defects aecting product functionality appearing within the
guarantee period will be corrected by replacement or repair at our
option provided the product is used and maintained in accordance
with the instructions. Your statutory rights are not aected.
This warranty shall not be valid where it is contrary to U.S. and other
applicable laws, or where the warranty would be prohibited under
any economic sanctions, export control laws, embargos, or other restrictive trade
measures enforced by the United States or other applicable jurisdictions. This includes,
without limitation, any warranty claims implicating parties from, or otherwise located in,
Cuba, Iran, North Korea, Syria and the Crimea region.
To claim an extra 1 year guarantee, register your product online within 28 days of
purchase.
Register at: https://uk.remington-europe.com/product-registration
Consumables are guaranteed only for their recommended lifecycle. Replacement/spare
parts* are excluded and are only covered by a 1 year warranty.
*Examples include, but are not limited to, adaptors, haircare attachments, grooming accessories, etc.
SERVICE CENTRE
UNITED KINGDOM
G 0800 212 438 (free call mainland UK)
Spectrum Brands (UK) Ltd
Fir Street, Failsworth, Manchester
M35 0HS, UK
www.remington.co.uk
IRELAND
G 142 951 40
Remington Consumer Products,
Unit B12, Ballymount Corporate Park,
Ballymount, Dublin 12
https://ie.remington-europe.com

Ref. No. MB3000
Type No. MB01A
19/UK/ MB3000 T22-7001143 Version 09 /19
Remington® is a Registered Trade Mark of Spectrum Brands, Inc., or one of its subsidiaries.
Spectrum Brands (UK) Ltd
Fir Street,
Failsworth,
Manchester
M35 0HS
www.remington.co.uk
© 2019 Spectrum Brands, Inc.