Remington MB4850 User manual

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances,
especially when children are pres-
ent, basic safety precautions should
always be followed, including the
following:
READ ALL
INSTRUCTIONS
BEFORE USING.
DANGER
As with most electrical appliances,
electrical parts are electrically live
even when switch is off. To reduce
the risk of death by electric shock:
■ Do not reach for a plugged-in
trimmer that has fallen into water.
Unplug immediately.
■Do not place or store trimmer
where it can fall or be pulled into a
tub or sink while plugged in.
■Except when charging, always
unplug this trimmer from the
electrical outlet immediately
after using.
■ Unplug this trimmer before
cleaning.
■Do not use this trimmer with a
damaged or broken cutting unit,
as facial injury may occur.
■Always attach plug to trimmer,
then adapter to outlet. To
disconnect, turn all controls to OFF,
then remove adapter from outlet,
then detach power cord from the
trimmer for storage.
■Always store your trimmer
and adapter in a moisture-free
area. Make sure the cord is
disconnected from the trimmer.
■Keep trimmer out of extreme heat
and cold. Product must be stored
at 0º F to 120º F.
■Dispose of used batteries properly.
Do not incinerate. Batteries may
explode if overheated. Do not wrap
in metal or aluminum foil. Wrap in
newspaper before discarding. It is
suggested that you contact local
town/city officials to determine
proper battery redemption site(s)
in your area.
■For household use only.
■Do not store in tub or shower.
■Do expose the trimmer to liquids
other than water.
WARNING
To reduce the risk of burns, fire,
electric shock or injury to persons:
■ Do not crush, disassemble, expose
to excessive heat or incinerate the
appliance.
■Your trimmer should never be
left unattended when plugged
in, except when charging your
rechargeable trimmer.
■Close supervision is necessary
when this trimmer is used by, on,
or near children or persons with
certain disabilities.
■Use this trimmer only for its
intended use as described
in this manual. Do not use
attachments not recommended
by the manufacturer.
■Keep the cord away from heated
surfaces.
■Never operate this trimmer if it has
a damaged cord or if it is not
working properly, if it has been
dropped or damaged, or dropped
into water while plugged in.
■Never drop or insert any object into
any opening.
■Do not use outdoors or
operate where aerosol (spray)
products are being used or where
oxygen is being administered.
SAVE THESE INSTRUCTIONS
KEEP AWAY FROM CHILDREN
Product Features
Charging/Recharging
To recharge this trimmer, use only
the charging adapter provided.
■ Turn the trimmer off. Insert the
adapter plug into the Power Port,
then plug the adapter into an
electric wall outlet. The Charging
Indicator will blink, indicating
unit is charging. A full charge will
take approx. 3 – 5 hours. The
light will stop blinking and remain
illuminated to indicate that the
trimmer is fully charged.
■You may leave your trimmer
plugged in between uses. However,
if the trimmer is not going to
be used for an extended period
(2 weeks), unplug the unit and
recharge when resuming use.
■Charge the trimmer at
temperatures between 40 – 90°F,
to avoid adversely affecting battery
life.
■In order to preserve the life of
the batteries, they should be fully
discharged every six months and
then fully charged for 3–5 hours.
■Lithium (LiFePO4)batteries are
included in this trimmer (see
battery removal section for proper
disposal of batteries).
■ In cordless mode, your trimmer
will run for 120+ minutes before
additional charging is required.
Corded Operation
In the event that you run out of
cordless power, this trimmer can be
plugged in and used immediately in
corded mode to complete your trim.
Zoom Wheel and Removable
Adjustable Comb
NOTE: Adjustable Comb must be
attached to the trimmer in order to
use the Zoom Wheel.
The Zoom Wheel and Adjustable
Comb ensures precise trimming and
has nine adjustable positions:
Setting Beard Style Length
1 Stubble look 1.5mm
2 2.5mm
3 Short 4mm
4 5.5mm
5 Medium 7mm
6 9mm
7 11mm
8 Long 14mm
9 18mm
Operating Your Trimmer
Register Your New Product Today!
By registering your new Remington®product, you will receive these important benefits:
Proof of Ownership • Product Protection • Product Registration • Special Offers
Register online at: www.RemingtonProducts.com
MB4850
Use and Care Guide
■ To adjust, roll the Zoom Wheel
toward the top of the trimmer for
a longer length, and toward the
bottom of the trimmer for a shorter
length. The wheel will click into
one of nine positions.
■Begin trimming at one of the
longest settings 8 or 9 to avoid
accidentally trimming hair too
short. As you become familiar with
the settings, you can then select
your desired length setting.
Adjustable Comb
Remove Adjustable Comb if you
are: defining hairline edges such as
sideburns, trimming the nape of your
neck, trimming your beard line on
front of neck, or if you want to clean
cutter assembly.
To remove:
■ Be sure the trimmer is in OFF
position.
■While holding trimmer in one hand,
and holding the Zoom Wheel to
prevent it from turning, gently pull
the Adjustable Comb away from
the trimmer.The comb
can be removed and replaced
on any setting.
To replace:
■ Be certain trimmer is in OFF
position.
■While holding the trimmer in one
hand, and holding the Zoom Wheel
to prevent it from turning, slide the
comb over the top of the trimmer
until it “clicks” into position.
NOTE: The Adjustable Comb can only
be placed on the trimmer one way;
if it does not fit properly, remove and
reverse it.
Before Using
Quick Release Blades
Before Using Your Trimmer
■ Before using your trimmer for the
first time, charge the unit 4 hours
for optimal performance.
■ Make sure your face and facial hair
are clean and dry.
■Double check that the Adjustable
Comb is the desired position.
Cutting length is visible in Length
Indicator.
Quick Release Blades
■ The blade assembly can be
removed to change blades or for
easy cleaning.
■To remove blade assembly, press
the Quick Release Button and pull
blade away from trimmer body.
■To replace blade, align the guide
rails of the blade assembly with
the slots on the trimmer body and
snap into place. Make sure blade is
secure before turning on trimmer.
6
8
1
9
10
5
4
3
2
7
11
Feature Checklist
1. Beard Blade
2. Stubble Blade
3. Goatee/Detail Blade
4. Quick Release Button
5. Zoom Wheel
6. Length Indicator
7. Adjustable Comb (1.5-18mm)
8. On/Off Switch
9. Charging Indicator
10. Power Port
11. Cleaning Brush
12. Adaptor (not shown)

How to Use
Trimming Beards
■ Before you begin, comb your hair
in the direction that it grows so
that the hairs are at their maximum
height and facing in the same
direction.
■Determine how much hair you want
to cut and position the hair length
selector accordingly. Remember,
until you are familiar with using the
trimmer, it is always better to select
a longer hair setting initially in order
not to trim too much hair.
To Trim the Beard’s Hair Length
■ Make sure Adjustable Comb and
Beard Blade is on.
■Turn the trimmer so the front of the
cutting unit (Zoom Wheel side) is
facing away from you.
■Start trimming under your chin and,
following your jawbone line, work
toward your ear and upper beard
line using an upward motion. Allow
the Adjustable Comb to follow the
contours of your face. You may trim
either against or with the direction
of beard growth, whichever is
preferred.
To Define the Beard Line
■ Remove Adjustable Comb.
■ Hold trimmer vertically with cutting
blades facing you.
■Start with edge of beard line. With
the cutting blades resting lightly
against your skin, use motions
towards edge of beard line to trim
it to desired location in facial area
and away from beard in neck area.
■ For trimming in tight spots or small
areas attach Goatee Blade.
Creating the “Stubble Look”
■ Adjustable Comb should be on
and set to position 1 (1.5 mm) or
2 (2.5 mm).
■Hold trimmer horizontally with the
cutting unit facing either up or
down.
■Trim hairs using an upward or
downward motion against or
with the direction of hair growth,
whichever is preferred.
■For an even closer “stubble look,”
remove the Adjustable Comb and
repeat the previous two steps
using the Stubble Blade.
To Trim Sideburns
■ Comb sideburns following the
direction of your hair growth.
■Be certain Adjustable Comb
attachment is on.
■Hold trimmer vertically with front of
trimmer facing you.
■Trim sideburns using a downward
motion.
Cleaning and Maintenance Battery Removal and Disposal
Cleaning and Maintaining
Your Trimmer
Clean your trimmer regularly to
ensure that the unit’s operating life
is not prematurely shortened.
■ Unplug adapter from wall outlet
and insure that your trimmer is
turned off.
■Do not use liquid cleaners on
the cutters or harsh or corrosive
chemicals on the unit’s main body.
■ Remove Adjustable Comb. Tap or
blow out any excess hairs that
may be on the comb.
■Use cleaning brush to brush away
excess hair clippings from trimmer
blade.
■The removable blades and
trimmer body can be rinsed under
water. Rinse blade and/or body
under warm running water for
several seconds, making sure hair
debris is removed. Dry any excess
water that may remain on blade
before reattaching. See "Quick
Release Blades" for information on
detaching and reattaching blade
assembly.
■If blade is rinsed, it is
recommended to add 1 or 2 drops
of sewing machine oil to the blade.
Troubleshooting
The trimmer does not work when
turned on:
■ Trimmer must be charged for a
full 4 hours initially.
Trimmer cutters do not move:
■ The cutting unit may be dirty and
clogged. Clean the unit as directed in
Cleaning & Maintenance section.
Trimmer does not hold charge:
■ Fully discharge battery by running
trimmer until it stops; then follow
recharging instructions (see section
on "Operating Your Trimmer").
Trimming the Nape of Your Neck
■ You will need a hand mirror for this
operation if performing it alone. The
mirror is not necessary if trimming
is performed by a second person.
■Remove the adjustable comb: the
beard blade or stubble blade may
be used.
■Use your fingers to lift the hair at
the base of your head up off the
neck. Your index finger should be
covering the roots of the hairs you
are lifting to prevent accidental
removal by trimmer.
■Using your other hand, hold the
trimmer horizontally to the base
of your neck with the cutting unit
facing up, and move the trimmer
along the length of the neck
until the unit touches your finger
covering the hair roots at the base
of your head. Repeat this procedure
for the entire area of the neck. Be
sure to move the unit slowly when
performing this operation and to
keep the hair roots at the base of
your head out of the way of the
trimmer.
■Use the hand mirror to inspect the
results of the operation and ensure
all hairs along the nape of the neck
have been trimmed.
Performance Guarantee
Limited Two-Year Warranty
Spectrum Brands, Inc. is a global
consumer products company with
a diverse portfolio of world-class
brands, including Remington-
branded electric shavers. Spectrum
Brands, Inc. warrants this product
against any defects that are due to
faulty material or workmanship for
a two-year period from the original
date of consumer purchase. This
warranty does not include damage to
the product resulting from accident
or misuse.
If the product should become defec-
tive within the warranty period, we
will replace it free of charge. Return
your product and sales receipt with
your name, address and day time
phone number to: Remington Returns
Center, 507 Stokely Dr., P.O. Box 1,
Deforest, WI 53532. For more infor-
mation call 800-736-4648 in the US
or 800-268-0425 in Canada.
KEEP ORIGINAL SALES RECEIPT
AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.
This warranty does not cover prod-
ucts damaged by the following:
■ Accident, misuse, abuse or
alteration of the product
■Servicing by unauthorized persons
■Use with unauthorized accessories
■Connecting it to incorrect current
and voltage
■Wrapping cord around appliance
causing premature wear and
breakage
■Any other conditions beyond our
control
No responsibility, obligation, or liabil-
ity is assumed for the installation or
maintenance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington®branded product,
you are not satisfied and would like a refund, return it with the sales slip
indicating purchase price and date of purchase to the retailer from whom it was
purchased. Spectrum Brands, Inc. will reimburse all retailers who accept the
product within 30 days from the date of purchase. If you have any questions
concerning the money-back guarantee, please call 800-736-4648 in the US or
800-268-0425 in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington Men’s Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington®branded Men’s Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call
800-736-4648 in the US or 800-268-0425 in Canada.
*Applies to US and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington®branded Men’s Shave and
Groom product:
T22-0003524
100-240 VAC 50/60 Hz
Questions or comments:
Call 800-736-4648 in the US, or
800-268-0425 in Canada, or visit RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada Inc.
131 Saramia Crescent
Vaughan, ON L4K 4P7
® Registered Trademark of Spectrum Brands, Inc.
© 2015 Spectrum Brands, Inc. 6/15 13051-00
Made in China.
a. The Remington®product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
Battery Disposal
This trimmer contains two Lithium Iron Phosphate (LiFePO4) batteries. These
batteries must be disposed of properly and responsibly according to your state and
local regulations.
Battery Removal Instructions
1. Remove the blade cartridge from the trimmer.
2. Remove the 4 screws from the back side of the trimmer body.
3. Pry apart the two halves of the trimmer body to expose the internals.
4. With the top half of the trimmer body removed and the internals facing upward,
pull the end of the charge port upward to release the battery enclosure.
5. Cut the red and black wires which lead into the battery enclosure
6. Pry up the small plastic plate on the end of the battery enclosure that the red
and black wires lead into and move it out of the way
7. Remove the 2 screws from the end of the battery enclosure
8. Pry off the battery enclosure end cap
9. Pull firmly on what remains of the red and black wires to remove the batteries
and circuit board from the battery enclosure
10.Firmly pull the individual batteries away from the circuit board to remove them
from the circuit board and better expose the red and black battery leads.
11.Cut the remaining red and black battery leads to fully disconnect the batteries
12.Dispose of the batteries safely and responsibly according to your state and local
regulations and to the warnings section of this instruction book
U.S. residents: To order accessories call 800-392-6544, visit
www.RemingtonProducts.com, or visit your local retailer.
Canadian residents: To order accessories, please call 800-268-0425, visit
www.RemingtonProducts.com, or visit your local retailer.
Contains a
listed adaptor