Remington D-0422 User manual

If you must use your hair dryer in the bathroom, install a GFCI*
now!
Your local electrician can help you decide which type is best for you – a portable
unit that plugs into the electrical outlet or a permanent unit installed by your
electrician. The National Electrical Code now requires GFCI’s in bathrooms,
garages, and outdoor outlets of all new homes.
Why do you need a GFCI?
Electricity and water don’t mix. If your hair dryer falls in water while it’s plugged
in, the electric shock can kill you– even if the switch is “off.” A regular fuse or
circuit breaker won’t protect you under these circumstances. A GFCI offers you
greater protection.
A GFCI can save your life!
Compared to that, the price is small!
Don’t wait… install one now!
*GFCI is a sensitive device that reacts immediately to a small electric current
leak by stopping the electricity flow.
D-0422
Use and Care Guide
Fast Air Concentrator
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING.
KEEP AWAY FROM WATER.
DANGER
As with most electrical appliances, electrical parts are electrically live even
when the switch is off. To reduce the risk of death by electric shock:
■ Always unplug this appliance from the electrical outlet immediately after using.
■ Do not use while bathing or in the shower.
■ Do not place or store this appliance where it can fall or be pulled into a tub or
sink.
■ Do not place or drop into water or other liquid.
■ If this appliance falls into water, "unplug it" immediately. Do not reach into the
water.
■ Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ This appliance is for household use only.
■ An appliance should never be left unattended when it’s plugged in.
■ Close supervision is necessary when this appliance is used by,
on, or near children or individuals with certain disabilities.
■ Use this appliance only for its intended use as described in this manual. Do not
use attachments not recommended by Spectrum Brands, Inc.
■ Keep the cord away from heated surfaces. Do not wrap the cord around the
appliance.
■ Never operate this appliance if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or if it has been dropped
into water. Return the appliance to a service center for examinatioon and repair.
■
Never drop or insert any object into an opening or hose on the dryer.
■ Do not use outdoors or operate where aerosol (spray) products are being used,
or where oxygen is being administered.
■ Always store this appliance and cord in a moisture-free area.
■ Do not plug or unplug this appliance when your hands are wet.
■ Do not use in countries with 220/240 volt electrical systems; use only with
110/120 volt electrical systems.
■ While using the appliance, keep your hair away from the air inlets.
■ Do not use an extension cord or a voltage converter with this appliance.
■ Never use while sleeping.
■ Do not place appliance on any surface while it is operating.
■ Do not direct hot air toward eyes or other heat-sensitive areas.
■ Attachments may be hot during use.Allow them to cool before handling.
■ Never block the air openings of the appliance or place it on a soft surface,
such as a bed or couch, where the air openings may be blocked. Keep the air
openings free of lint, hair, etc.
■ Household use only.
SAvE ThESE INSTRUCTIONS
ALCI Safety Device
This hair dryer is provided with an appliance leakage circuit interrupter (ALCI)
safety device built into the plug. This device is designed to make the unit inoper-
able under some abnormal conditions, such as accidental immersion in water.
The ALCI safety device is equipped with a test button so that its operation can be
checked. This unit should be tested before each use to confirm that the safety
device is operational.
To test:
After plugging in your hair dryer:
1. Press the reset button on the ALCI device.
2. Press the test button. The reset button will pop out. This verifies that the safety
device is operating properly.
3. Press the reset button to reactivate your ALCI safety device.
4. Your hair dryer is now ready for use.
Note: This unit may automatically trip when unplugged. If so, the unit must be
reset after it is plugged in. If the dryer doesn’t reset after following the above
testing procedure, call 800-736-4648.
1. Should the ALCI safety device trip (i.e., reset button pops out) during use, press
the reset button. Should the hair dryer fail to reset, call 800-736-4648. Never
operate this appliance if it has been dropped in water.
2. The dryer is designed to work on ordinary household current only, 125 volts A.C.,
60 Hz. It is not intended for commercial use.
3. This appliance is equipped with an automatic thermal limiter, which will cycle off
when overheated and come back on when cooled down. If the unit cycles off,
unplug the cord for several minutes before restarting.
4. This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
GROUND FAULT CIRCUIT
INTERRUPTERS CAN
SAvE A LIFE!
SAFETY INSTRUCTIONS
Pure Ceramic Hair Dryer

2 Heats
2 Speeds
Cool Shot
Removable Air Filter
Hang Loop
Professional Slim
Barrel for More
Powerful Airflow
Fast Air Concentrator
for precision styling
Maintenance Instructions
The dryer needs minimum maintenance to ensure the best performance and
long life.
■ Do not attempt to repair the appliance yourself.
■ Keep all intake openings clear of dust
accumulation. See “Cleaning Instructions”
below. No other maintenance or lubrication is required.
■ If the cord becomes twisted due to use, periodically straighten it. Store appliance
and cord where they will not be damaged. Do not wrap cord around dryer.
Cleaning Instructions
The air filter should be cleaned regularly, since a dirty or clogged filter will impair
the efficiency of the dryer.
1. To clean air filter, make sure dryer is turned off and unplugged.
2. Rotate the removable air filter counterclockwise and gently pull it away from the
dryer.
3. Use a soft bristle brush to gently remove any particles that are lodged in filter.
4. If the unit is dirty, wipe it with a damp cloth.
5. To replace the air inlet after cleaning, align locking tabs and rotate the filter
clockwise.
Storage
When not in use, unplug the unit. Allow it to cool, and store out of reach of chil-
dren in a safe, dry location. Never wrap the cord around the appliance, as this
will cause the cord to wear prematurely and break. Handle cord carefully, and
avoid jerking, twisting, or straining it, especially at plug connections.
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a two-year period from the original date of con-
sumer purchase. This warranty does not include damage to the product resulting
from accident or misuse. If the product should become defective within the war-
ranty period, we will replace it free of charge. Please call 800-736-4648 in the U.S.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. ALL IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF FITNESS AND
MERCHANTABILITY, ARE LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL
PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. Some states do not allow the exclusion or limita-
tion of
incidental, special, or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington® branded product,
you are not satisfied and would like a refund, return it with the sales slip indi-
cating purchase price and date of purchase to the retailer from whom it was
purchased. Spectrum Brands, Inc. will reimburse all retailers who accept the
product within 30 days from the date of purchase. If you have any questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S.
125 VAC 60 Hz
Questions or comments: Call 800-736-4648 in the U.S.or visit
www.remington-products.com and/or www.stylewithremington.com
©2009 SBI 04/09 Job# CS37932
® Registered trademark of Spectrum Brands, Inc., or one of its subsidiaries.
Spectrum Brands, Inc.
Madison, WI 53711
MADE IN CHINA
T22-28251
Hair Care Tips
■ Keep the dryer about 8 inches away from your head to avoid burning your scalp
or damaging hair.
■ Always keep the dryer pointed down the hair shaft to smooth the cuticle and
create a silky, shiny style.
Basic Drying Techniques
1. Gently towel dry hair to remove excess water. Avoid rubbing hair with towel –
this creates split ends and frizziness. Detangle hair with a wide-toothed comb.
2. Be sure dryer is turned off. Plug dryer into an electrical outlet.
3. Turn the dryer on and set it to a high heat and speed. Remove some of the
additional moisture from your hair by briskly blow drying it all over, using your
fingers to "comb" through hair.
4. When hair is almost dry, lower the heat and speed to the desired settings and
begin to style.
5. Divide hair into manageable sections. Begin at the nape of your neck and brush hair,
following the movement of the brush with the dryer. Continue working your way
up to your scalp, then to the sides and the front, drying small sections at a time.
Settings
Low - Low Heat, Low Speed
High - High Heat, High Speed
Cool Shot:
The Cool Shot sets the style by blowing a cool stream of air. Press and hold cool
shot button to set style. Release button to return to warm air flow.
For straight, smooth hair:
With the dryer turned off, attach the concentrator to the end of the nozzle. Brush
hair from underneath using a large, round brush or paddle brush. Pull hair down
until the hair is fully extended and taut. Run the dryer slowly down the length
of the hair several times until dry. Repeat
with all sections of hair until it is com-
pletely dried. Lock in the style with Cool Shot.
For curly hair:
Use dryer on a low heat and speed setting and move it quickly about your head.
As you dry your hair, scrunch it with your favorite styling product or twirl strands
of hair around your fingers to add definition. When finished drying, lock in the
style with the Cool Shot.
Thank you for purchasing the Remington® hair dryer . Please carefully read
the instructions contained in this booklet, and keep them in a safe place
for future reference.
Key Features:
PURE CERAMIC PROTECTION
Emits far-infrared, radiant heat to help dry water molecules
inside the hair strand. This fast and efficient process helps
prevent heat damage to the outer cuticle for less frizz and
more shine.
NO FRIZZ, MORE SHINE – IONIC CONDITIONING
Negative ions neutralize positive ions that cause static and
frizz, giving hair a more healthy-looking shine.
FAST AIR PROTECTION – EVEN AIRFLOW PREVENTS
HOT SPOTS
A professional narrow barrel creates a high-speed airflow
to help reduce hot spots and over-drying.
Before
After
Slow-moving
hot air
High speed
airflow
PRODUCT FEATURES
HAIR CARE TIPS
CLEANING AND MAINTENANCE
WARRANTYHOW TO USE ■ To help prevent heat damage and add shine, spritz damp hair with a heat
protection spray before blow drying.
■ To create a style with lots of body, apply volumizing mousse to towel dried hair.
Distribute it evenly from roots to ends, then blow dry as usual. Hair will be soft,
shiny, and full of volume.
■ For a super smooth, salon-like blow dry, finish by running a straightening iron
over dried hair.
■ For a quick touch-up between shampoos, mist hair to dampen it, then style
with dryer.