Renesas R0E000010CKZ11 User manual

User’s Manual
R20UT0162EJ0200
R0E000010CKZ11 Rev.2.00
Jan 17, 2011
Small Connector Conversion Adapter for the E1 Emulator
1. Outline
The R0E000010CKZ11 adapter is used to connect
the 14-pin 2.54-mm pitch connector on the head of
the E1 specific user-system interface cable to 14-pin
1.27-mm pitch connectors.
Using this conversion adapter can reduce the area
taken up by the connector mounted on your system.
2. Package Components
Before using this product, confirm that the
R0E000010CKZ11 package contains the following items. Figure 1 External View of the R0E000010CKZ11
Table 1 Package Components
Item Qty.
R20UT0162EJ0200 Rev.2.00 Page 1 of 4
Jan 17, 2011
(1) R0E000010CKZ11 1
(2) Connector to be mounted on the user
system
TFM-107-01-L-D (through-hole type)
1
(3) R0E000010CKZ11 User’s Manual
(this document) 1
(4) R0E000010CKZ11 User's Manual
(Japanese) 1
3. Specifications
Table 2 Specifications
Item Description
User-system interface cable for
the E1 (R0E000010KCE00)
Small Connector Conversion Adapter
for the E1 Emulator
(R0E000010CKZ11, i.e. this product)
14-pin connector on the user
system(TFM-107-02-L-D (SMT) or
TFM-107-01-L-D (DIP): manufactured
by Samtec, Inc.)
Pin 1 Pin 13 User system
CN1
CN2
Orientation key
HTST-107-01-T-DV
(manufactured by Samtec, Inc.)
Upper
connector Guaranteed number of times for
insertion and removal: 50
(CN1)
SFM-107-02-L-D-A
(manufactured by Samtec, Inc.)
Lower
connector Guaranteed number of times for
insertion and removal: 50
(CN2)
Figure 2 Usage of the R0E000010CKZ11
4. Usage (See Figure 2)
The R0E000010CKZ11 is connected between the 14-pin connector (2.54-mm pitch) on the head of the user-system
interface cable (for the E1) and a 14-pin connector (1.27-mm pitch) on the user system as shown in Figure 2.
5. Usage Notes
This adapter provides different pin assignment from that of the standard interface connector for the E1 emulator.
Table 3 on the next page shows pin correspondence between CN1 (standard connector for the E1) and CN2 (small
connector). Take this pin assignment into account when designing your own board.

R0E000010CKZ11 User’s Manual
6. To Contact Us
IMPORTANT
Notes on This Product:
zWe cannot accept any request for repair.
zFor inquiries about the product or the contents of this manual, contact your local distributor.
http://www.renesas.com/inquiry
7. Correspondence between Pins of CN1 and CN2
Table 3 Correspondence between Pins
CN1 Pin No. CN2 Pin No.
1 4
2 1, 14
3 8
4 11
5 10
6 12
7 2
8 3
9 13
10 7
11 9
12 1, 14
13 5
14 6
8. Preparations
Figure 3 shows the limit on the heights of components mounted around the connector on the user system (the connector
for the adapter). Take this limit into account when designing your own system.
Figure 3 Limit on Height of Components Mounted around the Connector on the User System (the Connector for the
Adapter)
214
1 13
30mm
7.5mm7.5mm
A
n upper limit (5 mm) applies to the heights of components mounted around the connector on the
user system.
This limit is only applicable with the following types of connector.
Type number : TFM-107-02-L-D (surface-mount type: manufactured by Samtec, Inc.)
: TFM-107-01-L-D (through-hole type: manufactured by Samtec, Inc.)
The emulator is connected from this direction.
Orientation key
A
rea with limit on mounted components
(heights must be no greater than 5 mm)
R20UT0162EJ0200 Rev.2.00 Page 2 of 4
Jan 17, 2011

R0E000010CKZ11 User’s Manual
Regulatory Compliance Notices
European Union regulatory notices
This product complies with the following EU Directive. (This directive is only valid in the European Union.)
Environmental Compliance and Certifications:
・Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
WEEE Marking Notice (European Union Only)
Renesas development tools and products are directly covered by the European Union's Waste
Electrical and Electronic Equipment, (WEEE), Directive 2002/96/EC. As a result, this equipment,
including all accessories, must not be disposed of as household waste but through your locally
recognized recycling or disposal schemes. As part of our commitment to environmental
responsibility Renesas also offers to take back the equipment and has implemented a Tools Product
Recycling Program for customers in Europe. This allows you to return equipment to Renesas for
disposal through our approved Producer Compliance Scheme. To register for the program, click
here “
R20UT0162EJ0200 Rev.2.00 Page 3 of 4
Jan 17, 2011
http://www.renesas.com/weee".

Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or
using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas
Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual
property rights of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are
fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by
such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the
military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products
or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free.
Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas
Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not
use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the
product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless
otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;
personal electronic equipment; and industrial robots.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment
not specifically designed for life support.
"Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or
systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating
supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for
malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a
certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety
measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for
hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures.
Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use
Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other
inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2880 Scott Boulevard Santa Clara,CA 95050-2554, U.S.A.
Tel: [phone], Fax: [phone]
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3,Canada
Tel: [phone], Fax: [phone]
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: [phone], Fax: [phone]
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: [phone], Fax: [phone]
Renesas Electronics (China) Co.,Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District,Beijing 100083, P.R.China
Tel: [phone], Fax: [phone]
Renesas Electronics (Shanghai) Co.,Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120,China
Tel: [phone], Fax: [phone] / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: [phone], Fax: [phone]
Renesas Electronics Taiwan Co., Ltd.
7F, No. 363 Fu Shing North Road Taipei, Taiwan
Tel: [phone], Fax: [phone]
Renesas Electronics Singapore Pte. Ltd.
1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632
Tel: [phone], Fax: [phone]
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18,Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: [phone], Fax: [phone]
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: [phone], Fax: [phone]
SALES OFFICES
If the requirements shown in the "CAUTION"
sentences are ignored, the equipment may cause
personal injury or damage to the products.
Renesas Tools Website http://www.renesas.com/tools
A
ll trademarks and registered trademarks are the property
of their respective owners.
© 2010 Renesas Electronics Corporation and Renesas Solutions Corp. All rights reserved.
Colophon 1.0

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Renesas Electronics:
R5F21284SNSP#U0 R5F21294JSP#U0 R5F21294JSP#W4 R5F21294SNSP#U0 R5F21284JSP#U0
R5F21296KSP#W4 R5F21294SDSP#U0 R5F21282SDSP#U0 R5F21292SNSP#W4 R5F21286JSP#W4
R5F21294KSP#U0 R5F21296JSP#W4 R5F21292SNSP#U0 R5F21292SDSP#U0 R5F21284SYSP#W4
R5F21286KSP#W4 R5F21284JSP#W4 R5F21292SDSP#W4 R5F21284SDSP#U0 R5F21294KSP#W4
R5F21282SNSP#U0 R5F21284KSP#U0 R5F21284SDSP#W4