Renkforce 2266965 User manual

Charging
Connect one end of the USB cable to the USB charg-
ing port on the device and the other end to a suitable
(5 V/DC, 500 mA) power supply.
LED Status
Red on Battery charging
Off Battery fully charged
Red blink 1x
every 3 s Battery low
Pairing
1. Turn the speaker on.
- The status LED will alternate red and blue to
indicate pairing mode is on.
- If pairing mode is not on, press and hold
(3 sec) to enter pairing mode. A voice
prompt will indicate “waiting for pairing”.
2. Enable Bluetooth on your device and select “RF-
BTS-200”. If prompted enter password “0000”.
3. If pairing is successful:
- Blue LED blinks 1x every 6 sec.
- Voice prompts “Bluetooth connected”.
4. Repeat steps 1 and 2 to pair additional Bluetooth
devices.
Tips
• Pairing is open for 2 minutes.
• Max. 8 devices can be paired (2 simultaneously).
• After 8 devices have been paired, any new paired
devices will replace the oldest paired device.
Operation
Button Description
• Press to end call
• Press and hold to reject call
• Answer call
• Press and hold to enter pairing
mode
• Double-press redial last number
• Volume up +/ down -
• Press and hold +(next song)
/ -(previous song)
Play / pause music
• Press for hands-free calling
• Double-press to activate voice
command
Care and cleaning
• Disconnect the product from the mains before
each cleaning.
• Do not use any aggressive cleaning agents, rub-
bing alcohol or other chemical solutions as they
can cause damage to the housing and malfunc-
tioning.
• Clean the product with a dry, bre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full
text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a ag symbol and
enter the product order number in the search box.
You can then download the EU declaration of con-
formity in PDF format.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing of
them in the household waste is prohib-
ited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the do-
mestic waste is forbidden. The designations for the
heavy metals involved are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (name on (rechargeable) batter-
ies, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and contrib-
ute to the protection of the environment.
Technical data
Input voltage / current..... 5 V/DC, 500 mA
Battery type .................... 3.7 V/DC 1200 mAh LiPo
Bluetooth name .............. RF-BTS-200
Password: 0000
Standby time................... 360 hrs
Charging time ................. 3 hrs
Playback / talk time......... max. 24 hrs
Sound pressure .............. max. 80 dB
Voice control................... SIRI, Google Assistant
Multi-device pairing......... max. 8
(2 simultaneously)
Bluetooth ........................ V4.2, HSP V1.2, HFP
V1.5, A2DP V1.2, AVRCP
Class 2
Frequency....................... 2.402 – 2.480 GHz
Transmission power........ 2 dBm
Transmission distance.... max. 10 m (open area)
USB cable....................... 74 cm
Operating / Storage
conditions ....................... -20 to +60 ºC, 20 – 80 %
RH (non-condensing)
Dimensions..................... 200 x 20.6 x 62 mm
(W x H x D)
Weight ............................ 116 g
Operating Instructions
Stereo Bluetooth Speaker
Item No. 2266965
Intended use
The product is a slim Bluetooth speaker with remov-
able vehicle sun visor clip. Hands-free calling and
voice commands are supported.
Contact with moisture must be avoided under all
circumstances.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in or other hazards. Read the instruc-
tions carefully and store them in a safe place. Make
this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Bluetooth speaker
• Clip mount
• USB cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instruc-
tions. Always read this information care-
fully.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about the opera-
tion, safety or connection of the appliance.
• Maintenance, modications and repairs must only
be completed by a technician or an authorised re-
pair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instruc-
tions of any other devices which are connected
to the product.
c) LiPo batteries
• Shield the rechargeable battery against high
or low temperatures or direct sunlight. The re-
chargeable battery power and the battery life
of the hands-free system can considerably de-
crease in low temperatures.
• The rechargeable battery is permanently built into
the product and cannot be replaced.
• Never damage the rechargeable battery. Damag-
ing the casing of the rechargeable battery might
cause an explosion or a re! Unlike conventional
batteries/rechargeable batteries (e.g. AA or AAA
type), the casing of the LiPo rechargeable battery
does not consist of a thin sheet but rather a sensi-
tive plastic lm only.
• Never short-circuit the contacts of the recharge-
able battery. Do not throw the battery or the
product into re. There is a danger of re and
explosion!
• Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery rst.
• Never charge the rechargeable battery of the
product unattended.
• When charging, place the product on a surface
that is not heat-sensitive. It is normal that a cer-
tain amount of heat is generated during charging.
d) Speaker
• If you charge the product while driving, place the
product and the cable where it will not hinder your
ability to operate the vehicle.
• Please follow any legal regulations regarding the
use of hands-free devices and mobile phones in
vehicles.
• Use the product only if it does not interfere with or
endanger other road users.
Operating elements
1357
8
9
10
46
2
1 Hang up / refuse call
2 LED status indicator
3 Answer call
4 Clip mount (removable)
5 Microphone
6 Volume control
7 Play / pause
8 hands-free / voice dialing
9 ON/OFF switch
10 USB charging port
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2266965_v3_0920_02_dh_m_en

Charging
Connect one end of the USB cable to the USB charg-
ing port on the device and the other end to a suitable
(5 V/DC, 500 mA) power supply.
LED Status
Red on Battery charging
Off Battery fully charged
Red blink 1x
every 3 s Battery low
Pairing
1. Turn the speaker on.
- The status LED will alternate red and blue to
indicate pairing mode is on.
- If pairing mode is not on, press and hold
(3 sec) to enter pairing mode. A voice
prompt will indicate “waiting for pairing”.
2. Enable Bluetooth on your device and select “RF-
BTS-200”. If prompted enter password “0000”.
3. If pairing is successful:
- Blue LED blinks 1x every 6 sec.
- Voice prompts “Bluetooth connected”.
4. Repeat steps 1 and 2 to pair additional Bluetooth
devices.
Tips
• Pairing is open for 2 minutes.
• Max. 8 devices can be paired (2 simultaneously).
• After 8 devices have been paired, any new paired
devices will replace the oldest paired device.
Operation
Button Description
• Press to end call
• Press and hold to reject call
• Answer call
• Press and hold to enter pairing
mode
• Double-press redial last number
• Volume up +/ down -
• Press and hold +(next song)
/ -(previous song)
Play / pause music
• Press for hands-free calling
• Double-press to activate voice
command
Care and cleaning
• Disconnect the product from the mains before
each cleaning.
• Do not use any aggressive cleaning agents, rub-
bing alcohol or other chemical solutions as they
can cause damage to the housing and malfunc-
tioning.
• Clean the product with a dry, bre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full
text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a ag symbol and
enter the product order number in the search box.
You can then download the EU declaration of con-
formity in PDF format.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing of
them in the household waste is prohib-
ited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the do-
mestic waste is forbidden. The designations for the
heavy metals involved are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (name on (rechargeable) batter-
ies, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and contrib-
ute to the protection of the environment.
Technical data
Input voltage / current..... 5 V/DC, 500 mA
Battery type .................... 3.7 V/DC 1200 mAh LiPo
Bluetooth name .............. RF-BTS-200
Password: 0000
Standby time................... 360 hrs
Charging time ................. 3 hrs
Playback / talk time......... max. 24 hrs
Sound pressure .............. max. 80 dB
Voice control................... SIRI, Google Assistant
Multi-device pairing......... max. 8
(2 simultaneously)
Bluetooth ........................ V4.2, HSP V1.2, HFP
V1.5, A2DP V1.2, AVRCP
Class 2
Frequency....................... 2.402 – 2.480 GHz
Transmission power........ 2 dBm
Transmission distance.... max. 10 m (open area)
USB cable....................... 74 cm
Operating / Storage
conditions ....................... -20 to +60 ºC, 20 – 80 %
RH (non-condensing)
Dimensions..................... 200 x 20.6 x 62 mm
(W x H x D)
Weight ............................ 116 g
Operating Instructions
Stereo Bluetooth Speaker
Item No. 2266965
Intended use
The product is a slim Bluetooth speaker with remov-
able vehicle sun visor clip. Hands-free calling and
voice commands are supported.
Contact with moisture must be avoided under all
circumstances.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in or other hazards. Read the instruc-
tions carefully and store them in a safe place. Make
this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Bluetooth speaker
• Clip mount
• USB cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instruc-
tions. Always read this information care-
fully.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about the opera-
tion, safety or connection of the appliance.
• Maintenance, modications and repairs must only
be completed by a technician or an authorised re-
pair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instruc-
tions of any other devices which are connected
to the product.
c) LiPo batteries
• Shield the rechargeable battery against high
or low temperatures or direct sunlight. The re-
chargeable battery power and the battery life
of the hands-free system can considerably de-
crease in low temperatures.
• The rechargeable battery is permanently built into
the product and cannot be replaced.
• Never damage the rechargeable battery. Damag-
ing the casing of the rechargeable battery might
cause an explosion or a re! Unlike conventional
batteries/rechargeable batteries (e.g. AA or AAA
type), the casing of the LiPo rechargeable battery
does not consist of a thin sheet but rather a sensi-
tive plastic lm only.
• Never short-circuit the contacts of the recharge-
able battery. Do not throw the battery or the
product into re. There is a danger of re and
explosion!
• Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery rst.
• Never charge the rechargeable battery of the
product unattended.
• When charging, place the product on a surface
that is not heat-sensitive. It is normal that a cer-
tain amount of heat is generated during charging.
d) Speaker
• If you charge the product while driving, place the
product and the cable where it will not hinder your
ability to operate the vehicle.
• Please follow any legal regulations regarding the
use of hands-free devices and mobile phones in
vehicles.
• Use the product only if it does not interfere with or
endanger other road users.
Operating elements
1357
8
9
10
46
2
1 Hang up / refuse call
2 LED status indicator
3 Answer call
4 Clip mount (removable)
5 Microphone
6 Volume control
7 Play / pause
8 hands-free / voice dialing
9 ON/OFF switch
10 USB charging port
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2266965_v3_0920_02_dh_m_en

Charging
Connect one end of the USB cable to the USB charg-
ing port on the device and the other end to a suitable
(5 V/DC, 500 mA) power supply.
LED Status
Red on Battery charging
Off Battery fully charged
Red blink 1x
every 3 s Battery low
Pairing
1. Turn the speaker on.
- The status LED will alternate red and blue to
indicate pairing mode is on.
- If pairing mode is not on, press and hold
(3 sec) to enter pairing mode. A voice
prompt will indicate “waiting for pairing”.
2. Enable Bluetooth on your device and select “RF-
BTS-200”. If prompted enter password “0000”.
3. If pairing is successful:
- Blue LED blinks 1x every 6 sec.
- Voice prompts “Bluetooth connected”.
4. Repeat steps 1 and 2 to pair additional Bluetooth
devices.
Tips
• Pairing is open for 2 minutes.
• Max. 8 devices can be paired (2 simultaneously).
• After 8 devices have been paired, any new paired
devices will replace the oldest paired device.
Operation
Button Description
• Press to end call
• Press and hold to reject call
• Answer call
• Press and hold to enter pairing
mode
• Double-press redial last number
• Volume up +/ down -
• Press and hold +(next song)
/ -(previous song)
Play / pause music
• Press for hands-free calling
• Double-press to activate voice
command
Care and cleaning
• Disconnect the product from the mains before
each cleaning.
• Do not use any aggressive cleaning agents, rub-
bing alcohol or other chemical solutions as they
can cause damage to the housing and malfunc-
tioning.
• Clean the product with a dry, bre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full
text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a ag symbol and
enter the product order number in the search box.
You can then download the EU declaration of con-
formity in PDF format.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing of
them in the household waste is prohib-
ited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the do-
mestic waste is forbidden. The designations for the
heavy metals involved are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (name on (rechargeable) batter-
ies, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and contrib-
ute to the protection of the environment.
Technical data
Input voltage / current..... 5 V/DC, 500 mA
Battery type .................... 3.7 V/DC 1200 mAh LiPo
Bluetooth name .............. RF-BTS-200
Password: 0000
Standby time................... 360 hrs
Charging time ................. 3 hrs
Playback / talk time......... max. 24 hrs
Sound pressure .............. max. 80 dB
Voice control................... SIRI, Google Assistant
Multi-device pairing......... max. 8
(2 simultaneously)
Bluetooth ........................ V4.2, HSP V1.2, HFP
V1.5, A2DP V1.2, AVRCP
Class 2
Frequency....................... 2.402 – 2.480 GHz
Transmission power........ 2 dBm
Transmission distance.... max. 10 m (open area)
USB cable....................... 74 cm
Operating / Storage
conditions ....................... -20 to +60 ºC, 20 – 80 %
RH (non-condensing)
Dimensions..................... 200 x 20.6 x 62 mm
(W x H x D)
Weight ............................ 116 g
Operating Instructions
Stereo Bluetooth Speaker
Item No. 2266965
Intended use
The product is a slim Bluetooth speaker with remov-
able vehicle sun visor clip. Hands-free calling and
voice commands are supported.
Contact with moisture must be avoided under all
circumstances.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in or other hazards. Read the instruc-
tions carefully and store them in a safe place. Make
this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Bluetooth speaker
• Clip mount
• USB cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instruc-
tions. Always read this information care-
fully.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about the opera-
tion, safety or connection of the appliance.
• Maintenance, modications and repairs must only
be completed by a technician or an authorised re-
pair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instruc-
tions of any other devices which are connected
to the product.
c) LiPo batteries
• Shield the rechargeable battery against high
or low temperatures or direct sunlight. The re-
chargeable battery power and the battery life
of the hands-free system can considerably de-
crease in low temperatures.
• The rechargeable battery is permanently built into
the product and cannot be replaced.
• Never damage the rechargeable battery. Damag-
ing the casing of the rechargeable battery might
cause an explosion or a re! Unlike conventional
batteries/rechargeable batteries (e.g. AA or AAA
type), the casing of the LiPo rechargeable battery
does not consist of a thin sheet but rather a sensi-
tive plastic lm only.
• Never short-circuit the contacts of the recharge-
able battery. Do not throw the battery or the
product into re. There is a danger of re and
explosion!
• Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery rst.
• Never charge the rechargeable battery of the
product unattended.
• When charging, place the product on a surface
that is not heat-sensitive. It is normal that a cer-
tain amount of heat is generated during charging.
d) Speaker
• If you charge the product while driving, place the
product and the cable where it will not hinder your
ability to operate the vehicle.
• Please follow any legal regulations regarding the
use of hands-free devices and mobile phones in
vehicles.
• Use the product only if it does not interfere with or
endanger other road users.
Operating elements
1357
8
9
10
46
2
1 Hang up / refuse call
2 LED status indicator
3 Answer call
4 Clip mount (removable)
5 Microphone
6 Volume control
7 Play / pause
8 hands-free / voice dialing
9 ON/OFF switch
10 USB charging port
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2266965_v3_0920_02_dh_m_en

Charging
Connect one end of the USB cable to the USB charg-
ing port on the device and the other end to a suitable
(5 V/DC, 500 mA) power supply.
LED Status
Red on Battery charging
Off Battery fully charged
Red blink 1x
every 3 s Battery low
Pairing
1. Turn the speaker on.
- The status LED will alternate red and blue to
indicate pairing mode is on.
- If pairing mode is not on, press and hold
(3 sec) to enter pairing mode. A voice
prompt will indicate “waiting for pairing”.
2. Enable Bluetooth on your device and select “RF-
BTS-200”. If prompted enter password “0000”.
3. If pairing is successful:
- Blue LED blinks 1x every 6 sec.
- Voice prompts “Bluetooth connected”.
4. Repeat steps 1 and 2 to pair additional Bluetooth
devices.
Tips
• Pairing is open for 2 minutes.
• Max. 8 devices can be paired (2 simultaneously).
• After 8 devices have been paired, any new paired
devices will replace the oldest paired device.
Operation
Button Description
• Press to end call
• Press and hold to reject call
• Answer call
• Press and hold to enter pairing
mode
• Double-press redial last number
• Volume up +/ down -
• Press and hold +(next song)
/ -(previous song)
Play / pause music
• Press for hands-free calling
• Double-press to activate voice
command
Care and cleaning
• Disconnect the product from the mains before
each cleaning.
• Do not use any aggressive cleaning agents, rub-
bing alcohol or other chemical solutions as they
can cause damage to the housing and malfunc-
tioning.
• Clean the product with a dry, bre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full
text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a ag symbol and
enter the product order number in the search box.
You can then download the EU declaration of con-
formity in PDF format.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing of
them in the household waste is prohib-
ited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the do-
mestic waste is forbidden. The designations for the
heavy metals involved are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (name on (rechargeable) batter-
ies, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and contrib-
ute to the protection of the environment.
Technical data
Input voltage / current..... 5 V/DC, 500 mA
Battery type .................... 3.7 V/DC 1200 mAh LiPo
Bluetooth name .............. RF-BTS-200
Password: 0000
Standby time................... 360 hrs
Charging time ................. 3 hrs
Playback / talk time......... max. 24 hrs
Sound pressure .............. max. 80 dB
Voice control................... SIRI, Google Assistant
Multi-device pairing......... max. 8
(2 simultaneously)
Bluetooth ........................ V4.2, HSP V1.2, HFP
V1.5, A2DP V1.2, AVRCP
Class 2
Frequency....................... 2.402 – 2.480 GHz
Transmission power........ 2 dBm
Transmission distance.... max. 10 m (open area)
USB cable....................... 74 cm
Operating / Storage
conditions ....................... -20 to +60 ºC, 20 – 80 %
RH (non-condensing)
Dimensions..................... 200 x 20.6 x 62 mm
(W x H x D)
Weight ............................ 116 g
Operating Instructions
Stereo Bluetooth Speaker
Item No. 2266965
Intended use
The product is a slim Bluetooth speaker with remov-
able vehicle sun visor clip. Hands-free calling and
voice commands are supported.
Contact with moisture must be avoided under all
circumstances.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in or other hazards. Read the instruc-
tions carefully and store them in a safe place. Make
this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Bluetooth speaker
• Clip mount
• USB cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instruc-
tions. Always read this information care-
fully.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about the opera-
tion, safety or connection of the appliance.
• Maintenance, modications and repairs must only
be completed by a technician or an authorised re-
pair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instruc-
tions of any other devices which are connected
to the product.
c) LiPo batteries
• Shield the rechargeable battery against high
or low temperatures or direct sunlight. The re-
chargeable battery power and the battery life
of the hands-free system can considerably de-
crease in low temperatures.
• The rechargeable battery is permanently built into
the product and cannot be replaced.
• Never damage the rechargeable battery. Damag-
ing the casing of the rechargeable battery might
cause an explosion or a re! Unlike conventional
batteries/rechargeable batteries (e.g. AA or AAA
type), the casing of the LiPo rechargeable battery
does not consist of a thin sheet but rather a sensi-
tive plastic lm only.
• Never short-circuit the contacts of the recharge-
able battery. Do not throw the battery or the
product into re. There is a danger of re and
explosion!
• Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery rst.
• Never charge the rechargeable battery of the
product unattended.
• When charging, place the product on a surface
that is not heat-sensitive. It is normal that a cer-
tain amount of heat is generated during charging.
d) Speaker
• If you charge the product while driving, place the
product and the cable where it will not hinder your
ability to operate the vehicle.
• Please follow any legal regulations regarding the
use of hands-free devices and mobile phones in
vehicles.
• Use the product only if it does not interfere with or
endanger other road users.
Operating elements
1357
8
9
10
46
2
1 Hang up / refuse call
2 LED status indicator
3 Answer call
4 Clip mount (removable)
5 Microphone
6 Volume control
7 Play / pause
8 hands-free / voice dialing
9 ON/OFF switch
10 USB charging port
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2266965_v3_0920_02_dh_m_en

Charging
Connect one end of the USB cable to the USB charg-
ing port on the device and the other end to a suitable
(5 V/DC, 500 mA) power supply.
LED Status
Red on Battery charging
Off Battery fully charged
Red blink 1x
every 3 s Battery low
Pairing
1. Turn the speaker on.
- The status LED will alternate red and blue to
indicate pairing mode is on.
- If pairing mode is not on, press and hold
(3 sec) to enter pairing mode. A voice
prompt will indicate “waiting for pairing”.
2. Enable Bluetooth on your device and select “RF-
BTS-200”. If prompted enter password “0000”.
3. If pairing is successful:
- Blue LED blinks 1x every 6 sec.
- Voice prompts “Bluetooth connected”.
4. Repeat steps 1 and 2 to pair additional Bluetooth
devices.
Tips
• Pairing is open for 2 minutes.
• Max. 8 devices can be paired (2 simultaneously).
• After 8 devices have been paired, any new paired
devices will replace the oldest paired device.
Operation
Button Description
• Press to end call
• Press and hold to reject call
• Answer call
• Press and hold to enter pairing
mode
• Double-press redial last number
• Volume up +/ down -
• Press and hold +(next song)
/ -(previous song)
Play / pause music
• Press for hands-free calling
• Double-press to activate voice
command
Care and cleaning
• Disconnect the product from the mains before
each cleaning.
• Do not use any aggressive cleaning agents, rub-
bing alcohol or other chemical solutions as they
can cause damage to the housing and malfunc-
tioning.
• Clean the product with a dry, bre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full
text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a ag symbol and
enter the product order number in the search box.
You can then download the EU declaration of con-
formity in PDF format.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing of
them in the household waste is prohib-
ited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the do-
mestic waste is forbidden. The designations for the
heavy metals involved are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (name on (rechargeable) batter-
ies, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and contrib-
ute to the protection of the environment.
Technical data
Input voltage / current..... 5 V/DC, 500 mA
Battery type .................... 3.7 V/DC 1200 mAh LiPo
Bluetooth name .............. RF-BTS-200
Password: 0000
Standby time................... 360 hrs
Charging time ................. 3 hrs
Playback / talk time......... max. 24 hrs
Sound pressure .............. max. 80 dB
Voice control................... SIRI, Google Assistant
Multi-device pairing......... max. 8
(2 simultaneously)
Bluetooth ........................ V4.2, HSP V1.2, HFP
V1.5, A2DP V1.2, AVRCP
Class 2
Frequency....................... 2.402 – 2.480 GHz
Transmission power........ 2 dBm
Transmission distance.... max. 10 m (open area)
USB cable....................... 74 cm
Operating / Storage
conditions ....................... -20 to +60 ºC, 20 – 80 %
RH (non-condensing)
Dimensions..................... 200 x 20.6 x 62 mm
(W x H x D)
Weight ............................ 116 g
Operating Instructions
Stereo Bluetooth Speaker
Item No. 2266965
Intended use
The product is a slim Bluetooth speaker with remov-
able vehicle sun visor clip. Hands-free calling and
voice commands are supported.
Contact with moisture must be avoided under all
circumstances.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in or other hazards. Read the instruc-
tions carefully and store them in a safe place. Make
this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Bluetooth speaker
• Clip mount
• USB cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instruc-
tions. Always read this information care-
fully.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about the opera-
tion, safety or connection of the appliance.
• Maintenance, modications and repairs must only
be completed by a technician or an authorised re-
pair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instruc-
tions of any other devices which are connected
to the product.
c) LiPo batteries
• Shield the rechargeable battery against high
or low temperatures or direct sunlight. The re-
chargeable battery power and the battery life
of the hands-free system can considerably de-
crease in low temperatures.
• The rechargeable battery is permanently built into
the product and cannot be replaced.
• Never damage the rechargeable battery. Damag-
ing the casing of the rechargeable battery might
cause an explosion or a re! Unlike conventional
batteries/rechargeable batteries (e.g. AA or AAA
type), the casing of the LiPo rechargeable battery
does not consist of a thin sheet but rather a sensi-
tive plastic lm only.
• Never short-circuit the contacts of the recharge-
able battery. Do not throw the battery or the
product into re. There is a danger of re and
explosion!
• Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery rst.
• Never charge the rechargeable battery of the
product unattended.
• When charging, place the product on a surface
that is not heat-sensitive. It is normal that a cer-
tain amount of heat is generated during charging.
d) Speaker
• If you charge the product while driving, place the
product and the cable where it will not hinder your
ability to operate the vehicle.
• Please follow any legal regulations regarding the
use of hands-free devices and mobile phones in
vehicles.
• Use the product only if it does not interfere with or
endanger other road users.
Operating elements
1357
8
9
10
46
2
1 Hang up / refuse call
2 LED status indicator
3 Answer call
4 Clip mount (removable)
5 Microphone
6 Volume control
7 Play / pause
8 hands-free / voice dialing
9 ON/OFF switch
10 USB charging port
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2266965_v3_0920_02_dh_m_en

Charging
Connect one end of the USB cable to the USB charg-
ing port on the device and the other end to a suitable
(5 V/DC, 500 mA) power supply.
LED Status
Red on Battery charging
Off Battery fully charged
Red blink 1x
every 3 s Battery low
Pairing
1. Turn the speaker on.
- The status LED will alternate red and blue to
indicate pairing mode is on.
- If pairing mode is not on, press and hold
(3 sec) to enter pairing mode. A voice
prompt will indicate “waiting for pairing”.
2. Enable Bluetooth on your device and select “RF-
BTS-200”. If prompted enter password “0000”.
3. If pairing is successful:
- Blue LED blinks 1x every 6 sec.
- Voice prompts “Bluetooth connected”.
4. Repeat steps 1 and 2 to pair additional Bluetooth
devices.
Tips
• Pairing is open for 2 minutes.
• Max. 8 devices can be paired (2 simultaneously).
• After 8 devices have been paired, any new paired
devices will replace the oldest paired device.
Operation
Button Description
• Press to end call
• Press and hold to reject call
• Answer call
• Press and hold to enter pairing
mode
• Double-press redial last number
• Volume up +/ down -
• Press and hold +(next song)
/ -(previous song)
Play / pause music
• Press for hands-free calling
• Double-press to activate voice
command
Care and cleaning
• Disconnect the product from the mains before
each cleaning.
• Do not use any aggressive cleaning agents, rub-
bing alcohol or other chemical solutions as they
can cause damage to the housing and malfunc-
tioning.
• Clean the product with a dry, bre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full
text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a ag symbol and
enter the product order number in the search box.
You can then download the EU declaration of con-
formity in PDF format.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing of
them in the household waste is prohib-
ited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the do-
mestic waste is forbidden. The designations for the
heavy metals involved are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (name on (rechargeable) batter-
ies, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and contrib-
ute to the protection of the environment.
Technical data
Input voltage / current..... 5 V/DC, 500 mA
Battery type .................... 3.7 V/DC 1200 mAh LiPo
Bluetooth name .............. RF-BTS-200
Password: 0000
Standby time................... 360 hrs
Charging time ................. 3 hrs
Playback / talk time......... max. 24 hrs
Sound pressure .............. max. 80 dB
Voice control................... SIRI, Google Assistant
Multi-device pairing......... max. 8
(2 simultaneously)
Bluetooth ........................ V4.2, HSP V1.2, HFP
V1.5, A2DP V1.2, AVRCP
Class 2
Frequency....................... 2.402 – 2.480 GHz
Transmission power........ 2 dBm
Transmission distance.... max. 10 m (open area)
USB cable....................... 74 cm
Operating / Storage
conditions ....................... -20 to +60 ºC, 20 – 80 %
RH (non-condensing)
Dimensions..................... 200 x 20.6 x 62 mm
(W x H x D)
Weight ............................ 116 g
Operating Instructions
Stereo Bluetooth Speaker
Item No. 2266965
Intended use
The product is a slim Bluetooth speaker with remov-
able vehicle sun visor clip. Hands-free calling and
voice commands are supported.
Contact with moisture must be avoided under all
circumstances.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in or other hazards. Read the instruc-
tions carefully and store them in a safe place. Make
this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Bluetooth speaker
• Clip mount
• USB cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instruc-
tions. Always read this information care-
fully.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about the opera-
tion, safety or connection of the appliance.
• Maintenance, modications and repairs must only
be completed by a technician or an authorised re-
pair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instruc-
tions of any other devices which are connected
to the product.
c) LiPo batteries
• Shield the rechargeable battery against high
or low temperatures or direct sunlight. The re-
chargeable battery power and the battery life
of the hands-free system can considerably de-
crease in low temperatures.
• The rechargeable battery is permanently built into
the product and cannot be replaced.
• Never damage the rechargeable battery. Damag-
ing the casing of the rechargeable battery might
cause an explosion or a re! Unlike conventional
batteries/rechargeable batteries (e.g. AA or AAA
type), the casing of the LiPo rechargeable battery
does not consist of a thin sheet but rather a sensi-
tive plastic lm only.
• Never short-circuit the contacts of the recharge-
able battery. Do not throw the battery or the
product into re. There is a danger of re and
explosion!
• Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery rst.
• Never charge the rechargeable battery of the
product unattended.
• When charging, place the product on a surface
that is not heat-sensitive. It is normal that a cer-
tain amount of heat is generated during charging.
d) Speaker
• If you charge the product while driving, place the
product and the cable where it will not hinder your
ability to operate the vehicle.
• Please follow any legal regulations regarding the
use of hands-free devices and mobile phones in
vehicles.
• Use the product only if it does not interfere with or
endanger other road users.
Operating elements
1357
8
9
10
46
2
1 Hang up / refuse call
2 LED status indicator
3 Answer call
4 Clip mount (removable)
5 Microphone
6 Volume control
7 Play / pause
8 hands-free / voice dialing
9 ON/OFF switch
10 USB charging port
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2266965_v3_0920_02_dh_m_en