Reolink RLC-823A User manual

RLC-823A
Reolink RLC-823A is smart enough to distinguish person, vehicle, or pet from other
objects. It frees your mind by offering accurate detection and greatly reducing the
false alarms on trivial objects' movements.
1. Specs
1
Metal Aluminum Case
2
Daylight Sensor
3
4 IR LEDs
4
High Definition Lens
5
3 Spotlights

1
Micro SD Card Slot
1
Power
2
Reset Button
3
Earth Wire
4
Network
5
Waterproof Lid

2. Setup and Install
Set up the Camera
What’s in the Box
Note: The package content may vary and update with different version and
platforms, please take the below information only for a reference. And the actual
package content are subject to the latest information on the product selling page.
RLC-823A
Set up the Camera on the App
Here is a guide on how to initially set up the camera via Reolink App.
Step 1. Tap the icon in the top right corner.
Surveillance Sticker*1
Pack of Screws*1
Mounting Template *1
RLC-823A*1
Quick Start Guide*1
1m Network
Cable*1
Waterproof Lid *1
Power Adapter *1

Note: If you've enabled the Add Device Automatically option on the App's
Settings page, you can tap this device on the Devices page and turn to Step
3directly.
Step 2. Scan the QR code on the back of the camera. You may tap Light to enable
a flashlight when setting up the camera in a dark environment.
If the phone doesn't respond, please tap Input UID/IP and then manually type in
the UID (16-digit characters under the QR code of the camera). Then tap Next.

Step 3. Create a login password for your camera. Then tap Next.
Step 4. Name your camera. Then tap Next.
Step 5. Initialization finished! You can start live viewing now.

Install the Camera
Please follow the steps below to install the camera.
Step 1. Drill holes in accordance with the mounting hole template (included in the
product box).
Note: Use the drywall anchors included in the package if needed.
Step 2. Install the mount base with screws included in the package.

Notes:
Run the cable through the cable notch on the mount base.
As for the WiFi camera, it is recommended that the antennas be installed upward
or horizontally for better WiFi connection.
Step 3. You may control the camera to pan and tilt via Reolink App or Client to
change the camera's direction.