Repotec RP-UB215B User manual

High Speed USB Adapter
User Manual
Ver: 1.0

4+1 ports High Speed USB Adapter
Table of Contents
Chapter 1 Introduction.......................................................... 3
1.1 Features....................................................................... 3
1.2 Environments.............................................................. 3
1.3 Package....................................................................... 4
Chapter 2 Installation............................................................ 5
2.1 Installing the USB Card.............................................. 5
2.2 Software Installation .................................................. 5
2

4+1 ports High Speed USB Adapter
Chapter 1 Introduction
Congratulations on your purchase of this USB Card . Instructions for installing
and configuring this product can be found in this manual. Before you install and
use this product, please read this manual carefully for full exploiting the
functions of this product.
This card is designed to work with drives, webcams, and other USB enabled
devices. At up to 40 times faster than USB card, the five USB2.0 ports can
transfer data at 480Mbps. Making it ideal for external storage, backup,
networking and video devices.
1.1 Features
• Provide five downstream USB Type A receptacles. (4 External, 1 Internal)
• Compliance with USB2.0 Standards, Backward Compatible with USB
1.0,USB1.1
• Compliance with UHCI 1.1
• Compliance with EHCI 0.95
• Plug-and-Play installation
• Support PCI Revision2.2
• Support simultaneous connection of up to 127 devices by attaching
peripherals through interconnected external USB hubs
• Each USB port provides electrical power for devices of up to 500mA
• Provide up to 480Mbps Transfer Speeds
• Support PCI-Bus Power Management Interface 1.1
1.2 Environments
• Storage Temperature: -40ºC ~70ºC
• Operating Temperature : 0ºC ~40ºC
• Storage Humidity: 5% ~90% RH Non-condensing
• Operating Humidity: 10% ~90% RH Non-condensing
3

4+1 ports High Speed USB Adapter
1.3 Package
• One USB Card
• One Manual
• The U6212 Drives and Manual on CD-ROM
4

4+1 ports High Speed USB Adapter
Chapter 2 Installation
2.1 Installing the USB Card
1. Shut down the computer, unplug its power cord, and remove the chassis
cover.
2. Insert the contact edge of the USB card into the connector of any available
PCI Bus Master expansion slot. Press the card firmly into the connector
such that the card contacts are fully seated in the connectors
3. Install the bracket screw that secures the card to the computer chassis.
4. Replace the computer chassis cover.
5. Reconnect the computer power cord, and switch computer power on.
2.2 Software Installation
The following instruction set up the LAN card in the computer running windows
XP.
1. Put the U6216 CD-ROM into computer’s CD driver, Double Click the CD driver. Then
the dialog box will appear as follow.
2. Double Click SETUP.EXE, an Installation Wizard will guide you through the
process.
5

4+1 ports High Speed USB Adapter
3. Click the Next button. The dialog box will appear as follow.
4. Select Install USB Driver, then click the Next button.
6

4+1 ports High Speed USB Adapter
5. Click the Finish button, the computer system will be restart.
Note: For Driver Uninstall, the user can remove the Microsoft USB 2.0 Host
Controller Driver by selecting the Uninstall button. This will completely
remove the driver from the system.
7