Reshable MR11N0190 User manual

User Manual

Dear Customer,
a. Theouter boxisdamaged.
c. Theparts/accessories/assembly tools are missing.
b. Theproduct isdamaged/bent/cracked whileyou open thebox.
e. Theinstructions are not clear and can notbe referred to.
f. Theproduct has functional problems.
g. Other aspects that you are not satisfied with.
d. Theproduct ishard to assemble.
Thankyouforyour purchase.
RESHABLEiscreatedtobetheperfect startingspot forany barbers. Supplyingtop-quality
barber supplies like barber chairs, salon stations, rolling makeup cases, styling drawer
cabinets, hair tool holders, and more, we help people to keep their barber store running
with thebest equipment at themost reliable prices.
Whenyou receive theproduct,pleasemake sure thatall the parts are intact. Thenplease
browsetheentire installation manual before assembly. If problemsoccur unsatisfactorily
as follows:
Please do not hesitate to contact us for help (Be sure to mark the SKU NUMBER, e.g.,
MR11R0246, and the TRACKING NUMBER). Our RESHABLE team with factory direct
after-salesservicewill replywithin24 hoursanddoour best to resolve theproblem foryou.
Our serviceis available at any time.
Sincerely,
RESHABLE Team
RESHABLE
for Profession and Creativity!
2
1
You need
22 persons are needed
A wrench & an
allen key are
required for the
assembly of the
product. (not included)
1Tools required

3 4
Hardware List

6
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
5

8
7
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY

109
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY

11 12
PRODUCT ASSEMBLY PRODU CT ASS EMBLY

13 14
The slot direction of the seat chassis connector should be
consistent with the foot bar. Please remove the pre-installed screws before re-
installation.
PRODUCT ASSEMBLY PRODU CT ASS EMBLY

15 16
PRODUCT ASSEMBLY PRODU CT ASS EMBLY

17 18
PRODUCT ASSEMBLY PRODU CT ASS EMBLY

20
19
Q:
A: When you sit on the chair and lean all
your weight forward deliberately, the chair
will indeed tilt. So please notice this point:
if both your feet are on the footrest, please
sit backward as far as you can;
meanwhile, please ask the barber or
someone else to step the foot bar and set
the chair to the lowest when the guest
sitting on the chair is ready to stand up.
(Note: please remind guests not to stand
on the footrest with both feet, please put
one foot on the ground first.)
What if the chair is difficult to rotate?
Q: If the chair keeps tilting and cannot be
A: In this case, there may be something
wrong with the installation. Please check
whether the mounting direction of the seat
chassis connector is wrong. The slot
direction of the seat chassis connector
should be consistent with the foot bar.
When it is confirmed, please make sure
whether the hydraulic pump is properly
inserted into the pump pin.
righted, what should I do?
Frequently Asked Questions
Q: What is the weight limit ? A: 330 lbs.
Q: Can the chair be rotated 360 degrees?
A: Yes.
Q: What if the chair is difficult to rotate? A: Step to lift up the chair and then rotate it.
Q:How to maintain the backrest and seat
daily?
A: The PVC leather should be cleaned
regularly. Spray a little of the leather care
solution onto a sponge and then use the
sponge to wipe the leather surfaces
Q: How to maintain the hydraulic pump?
gently.
A: Keep the surfaces of the hydraulic
pump clean (including the centre shaft).
Periodically load up and down the chair
to expel the air inside. Add some anti-rust
oil to the cloth and then use the cloth to
wipe the centre shaft gently.
Daily Maintenance
Dear Customer, if you have any advice or questions on the
installation or product after receiving, please give us
feedback as soon as possible. We will provide you with
professional guidance. Please feel free to use it.
Q: What should I do when the seat cannot
be lifted or lowered normally?
A: Please check whether the pump is
getting air, whether it has hydraulic oil,
and whether the shaft is rust. Find out the
problem first and then repair or replace it.
PRODUCT ASSEMBLY