Reshable MR11B0218 User manual

User Manual
Model Number：MR11B0218
MR11E0219

Dear Customer,
Thankyouforyour purchase.
RESHABLEiscreatedtobe theperfect startingspotforanybarbers.Supplyingtop-quality
barber supplieslike barber chairs, salon stations, rolling makeup cases, styling drawer
cabinets, hair toolholders, and more, we help people to keep their barber store running
with thebest equipment at themost reliable prices.
Whenyoureceive theproduct,pleasemake sure thatall theparts are intact. Thenplease
browsetheentire installation manual before assembly. If problemsoccur unsatisfactorily
as follows:
a. Theouter boxisdamaged.
c. Theparts/accessories/assembly tools are missing.
b. Theproduct isdamaged/bent/cracked whileyou open thebox.
e. Theinstructions are not clear and can notbe referred to.
f. Theproduct has functional problems.
g. Other aspects that you are not satisfied with.
d. Theproduct ishard to assemble.
Please do not hesitate to contact us for help (Be sure to mark the SKU NUMBER, e.g.,
MR11R0246, and the TRACKING NUMBER). Our RESHABLE team with factory direct
after-salesservicewill replywithin24 hoursanddoour best to resolve theproblem foryou.
Our serviceis available at any time.
Sincerely,
RESHABLE Team
RESHABLE
for Profession and Creativity!
2
1
You need
22 persons are needed
A wrench is
required for the
assembly.
(not included)
1Tools required
Backrest Handrest
Footrest
Leg Rest
Towel Hook
Reclining Lever Seat
Foot Bar
Base
Footrest Support

Check the package contents before getting started !
STEP 1
Ｆｏｏｔ ｂａｒ １ＰＣ
First:Install Foot Lever to Pump
Step 1:Place assembled Base and Pump on the floor. Use Allen
Wrench to loosen the screws in the crossbar. See the
diagram beside.Insert Foot Lever into the holes of the
crossbar. (May require to slightly squeeze the ends of
Foot Lever towards each other, and some maneuvering
for the ends to go into place.)
Step 2:Tighten the 2 set screws to firmly hold the Foot Lever in
place.
Note: Please refer to the picture for the assembly direction of the
foot lever. Do not install it in the wrong direction.
3 4
NOTICE:
If your package is missing parts or you are having issues with
the installation, please call us directly or message us. Our
customer service team will address any questions or concerns
you may have.
Have this manual open and ready for reference.
SAFETY:
To reduce risk of injury when installing & using the chair, please
follow these precautions:
·Read the instructions thoroughly before assembling and using
your salon chair.
·It is helpful to have 2 people to install and turn the chair
upright after installing.
·Do not overextend the chair, otherwise it will cause the risk of
falling or tipping and make the occupant over.
Hardware List
１ＰＣ
Backrest １ＰＣ
Seat
Ｆｏｏｔ Bａｒ Ｂａｓｅ
Reclining Lever １ＰＣ Towel Hook １ＰＣ
１ＰＣ １ＰＣ Footrest １ＰＣ
1ＰＣ
Ｈａｎｄｒｅｓｔ
PRODUCT ASSEMBLY
1ＰＣ
Leg Rest
Ｂａｓｅ １ＰＣ
1ＰＣ
Hexagon
Screwdriver 1ＰＣ
Hexagon
Screwdriver
1ＰＣ
Hexagon
Screwdriver
M4 M5
M6
Footrest Support 3ＰＣS

STEP 3
Third:Install Handrest to Seat
6
5
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
STEP 2
Second:Install the Seat onto the Pump Top
１ＰＣ
Seat 1ＰＣ
Ｈａｎｄｒｅｓｔ
Step 1:Locate the slot on the short column under the Seat. Align
this slot with the black pin at the pump top.
Step 2:Set the Seat onto the pump top and press it down.
Step 1:Remove the 4 big bolts and 2 small bolts prefixed in the
seat.
Step 2:Install the handrest to the seat by 4 big bolts and 2 small
bolts removed from the seat.
The circles is the
conncting position
of big bolt or small
bolt

8
7
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
STEP 4
Fourth:Install Leg Rest to Footrest
Step 1:Remove the 2 big bolts prefixed on the leg rest then install the
leg rest to the footrest by the 2 big bolts removed from the leg
rest.
Footrest Support
STEP 5
Fifth:Install Footrest Low Support and Footrest
High Supports to Footrest
Step 1:Install 3Footrest Supports to the bottom of the footrest.
１ＰＣ 1ＰＣ Footrest Support
Footrest Leg Rest 3ＰＣS

109
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
STEP 6
Sixth:Install Footrest to Chair
Step 1:Remove the 2 big bolts prefixed on the footrest.
STEP 7
Seventh:Install Backrest to Chair
１ＰＣ
Backrest
Step 1:Removed 4 bolts prefixed on the backrest.
Step 2:Install the backrest to the chair by the 4 bolts removed from the
backrest.
Step 2:Install the footrest to the chair by the big bolts removed from the
footrest.

12
11
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
STEP 8
Eighth：Install Reclining Lever to Chair
Step 1:Loosen the bolts prefixed on the bottom of Reclining Lever.
Step 2:Set Reclining Lever on to the bent iron bar.
Step 3:Tighten the bolt prefixed on the bottom of Reclining Lever.
STEP 9
Reclining Lever １ＰＣ Towel Hook １ＰＣ
Ninth：Install Towel Hook to Handrest
Step 1:Removed the 2 bolts prefixed on the handrest.
Step 2:Install the towel hook to the handrest by the 2 bolts
removed from the handrest.

Fourth:Recline the Backrest
1.Push the lever backwards （35°- 40°）and push the backrest
back. The backrest will tilt backwards;loosen the lever to get the
tilt degree of the backrest ;turn the lever backwards again （35°-
40°). The backrest can back to the original position. Don't push
the lever too hard or t'll break.
Hold up
14
13
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
First:Lock & Unlock the rotation
1.In the natural state, the upper part of the pump can rotate
freely on the pump rotation axis.
2.Elevate the foot bar to lock the rotating.
Second:Raisethe Chair
1.Step down the foot bar repeatedly to raise the chair to
the desired height.
2.Do not overextend the chair, which will cause the risk of
falling or tipping the chair and make the occupant over.
Third:Lower the Chair
1.Step down foot bar to the bottom and hold it to allow
the chair to lower.

Q:How to maintain the backrest or seat
daily?
Q: How to maintain the hydraulic pump?
A: The PVC leather should be cleaned
regularly. Spray a little of the leather care
solution onto a sponge and then use the
sponge to wipe the leather surfaces
gently.
A: Keep the surfaces of the hydraulic
pump (including the centre shaft) clean.
Sit on and raise/lower the chair
periodically to expel the air inside.
Regularly wipe the hydraulic pump with
anti-rust oil.
Daily Maintenance
16
15
OPERATE THE CHAIR
OPERATE THE CHAIR
Dear Customer, if you have any advice or questions on the installation
or product after receiving, please give us feedback as soon as possible.
We will provide you with professional guidance. Please feel free to use
it.
A: Please check whether the foot lever is
stepped to the lowest. If it's the lowest but
still has the problem, there could be
something wrong with the pump. You need
to replace it.
Q: What if the chair is difficult to rotate?
Q: How to prevent the chair from leaning
forward?
A: In this case, there may be something
wrong with the installation. Please check
whether the mounting direction of the seat
chassis connector is wrong. The direction
of the slot in the seat chassis connector
should be opposite to that of the footrest
(refer to the detail drawing in STEP6).
When it is confirmed, please make sure
whether the hydraulic pump is properly
inserted into the pump pin.
Q: If the chair keeps tilting and cannot be
righted, what should I do?
A: In this case, there may be air in the
pump. Please sit on the chair and raise it to
the highest, then lower it. Repeat the
above action until it can be used normally.
Q: What should I do when the seat cannot
be lifted or lowered normally?
A: When you sit on the chair and lean all
your weight forward deliberately, the chair
will indeed tilt. So please notice this point:
if both your feet are on the footrest, please
sit back as far as you can; meanwhile,
please ask the barber or someone else to
step the foot lever and set the chair to the
lowest when the guest sitting on the chair
is ready to stand up. (Note: please remind
guests not to stand on the footrest with
both feet, please put one foot on the
ground first.)
Frequently Asked Questions
Fifth:Recline the Headrest
1.You can adjust the height of the headrest by pressing
the button on the backrest.