Mocka Leon User manual

mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Leon Occasional Chair
Thank you for purchasing Leon Occasional Chair. Please follow the
manufacturer’s assembly instructions in detail.
Read instruction carefully. Remove all wrapping material, staples and straps from the
carton. See Hardware and Furniture Parts List for guidance. Be sure you have all parts
before you start assembling. Place all wooden furniture part a clean and flat soft
surface, such as carpet or rug to prevent from being scratched.
CAUTION :
KEEP ALL HARDWARE PART OUT OF REACH OF CHILDREN.
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
HARDWARE SUPPLIED
A
x4
50mm screw
B
x4
30mm screw
C
x8
spring
washer
D E
F
x10
dowel
G H
x6
screw
I
x1
allen key
x4
wood button
x4
screw pin
x4
washer

mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Leon Occasional Chair
1 2
Insert 10 x dowels (G) into legs (1) and stretchers (2) as shown. Attach assembled parts together as shown and secure with 4 x bolts (A),
4 x spring washer (C) and 4 x screw pins (E). Tighten with an Allen Key (H).
L
R
R
1
2
G
G
H
ACE

mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Leon Occasional Chair
3 4
Attach 1 x backrest (I) to assembled frame and secure with 4 x screws (B),
4 x spring washers (C), 4 x washers (D). Tighten with an Allen Key (H). Once
tightened insert 4 x wood buttons (I) as shown.
Attach seat (4) to asembled frame and secure with 6 x screws (F). Tighten with
a screwdriver.
D
C
B
H
I
F
4
2

mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Leon Occasional Chair
5
Once assembled lift furniture into place, do not drag. Ensure unit is
balanced and steady before use. You’re done, enjoy!