Resource Decor Emerson Dining Table User manual

PART LIST
A [ 1] TABLETOP
B [ 2] TABLELEAVES
C [ 1] BASE
Thank you for choosing this quality product. Be sure to check all packaging materials carefully for small parts that may have
become loose during shipment and place all parts on a non-abrasive surface.
IMPORTANT :These parts can be cumbersome and heavy to some people, therefore the assistance of two or more people is
recommended in order to prevent personal injury and ensure the furniture is not damaged during the assembly Process.
EMERSON DINING TABLE
NO D ESC RI PT I O N QTY
1
2
3
4
HARDWARELIST
LOCK WASHER 12
ALLEN HEAD BOLT 12
PLAIN WASHER
ALLEN WRENCH
12
1
INSTRUCTIONS
1. Bring the table top (A) and set it on the base
(C). Align the fixed nuts at the bottom of the
top to the holes on top of the base. Insert Allen
bolts (1) throught to Lock washers (2) and Flat
washers (3) into each fixed nuts through the
holes on top of the base, then tighten them by
using Allen key (4). DO NOT OVER TIGHTEN.
Refer to FIGURE01.
3
2
1
4
FIGURE 01
A
C
Page 1 of 2

2. Align and insert two leaves (B) to
both ends of the table top (A). Secure
these parts with the metal locks. See
FIGURE02 & 03.
3. Check the table leveling, and adjust
the levelers at the bottom of the base
if necessary. See FIGURE 04.
CAREINSTRUCTIONS
1. Dust often using a clean, soft, dry and lint-free cloth.
2. Blot spills immediately and wipe with a clean, damp, cloth.
3. We do not recommend the use of chemical cleansers,
abrasives or furniture polish on our lacquered finish.
IMPORTANT SAFETY INSTRUCTIONS
1. Please read all instructions carefully before assembling.
2. For your safety, assembly by two or more adults is strongly recommended.
3. Keep instructions for future use.
4. Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.
B
Metal lock
FIGURE 02
Fig.02 Fig.03
FIGURE 03
Fig.04
Leveler
FIGURE 04
Page 2 of 2