Response CL3622B User manual

CL3622B
Model:
User Manual
Wireless Door Intercom
Telephone and Doorbell System
DECT Telephone and Door Intercom

Congratulations 1
Safety Precautions 1
Unpacking 3
Handset Layout and Keys Function 4
Base Station Layout 5
Outdoor Station Layout 6
Handset Key Description 7
LCD Window Icons Description 9
Installing Batteries 10
Installation Instructions 12
Charging Handset 14
Turning Handset On/Off 15
Part One: Cordless Handset 16
Making a call 16
Receiving a call 17
Contents
Muting the Microphone 18
Adjusting Audio Volume 18
Last Number Redial 19
Caller ID Log (CID) 20
Key Lock 22
Handsfree 24
Flash Signal 24
Ringer Setting 25
Selecting a Language 25
Handset Name 26
Auto Answer 26
Paging 27
Dial Mode 27
Menu Navigation 28
Menu Map 29
Phone Book 30
Base Station (BS) Settings 33

Handset (HS) Settings 35
Registration 39
Calling with more than
one Handset 40
Caller ID on call waiting 42
Part Two: Wireless Doorbell 43
Operating Range 47
Noise Filter 48
Notes 50

CL3622BHSC - Wireless Door Intercom Handset and Charger
(accessory to the CL3622 system)
CL6011B - Wireless Door Intercom System
CL6011BCS - Wireless Door Intercom Charging Dock Station
(accessory to the CL6011 system)
CL3660UM - Door Entry System Unlock Module
(compatible with CL3622 and CL6011 systems)
CLOSPSU - Unlock Module/Outdoor Station Power Supply Unit
Our range of Door Intercom System products include:

1. Connect one end of the phone line cord to the Base Station
and the other end to a standard telephone wall socket,
(may require the adapter provided).
2. Connect the end of the AC Power Adapter to the power
socket of the Base Station, then plug the AC Adapter
into a standard mains socket.
1. Choose a suitable location for the Outdoor Station.
2. Fix the metal mounting bracket on the wall using the fixing kit supplied.
3. Fix the Outdoor Station to the Bracket and secure with fixing screw supplied.

Unlock
Module
Interface
Power Supply
Output: +12V DC
300mA
Outdoor
Station
PGND
Power
CTRL
SGND
GND
12VDC
NO/ NC
Contacts
(Max. rating
240V 10A)
12VDC+
12VDC–
Lock+
Lock–
For activating devices,
e.g. Lock Module
PLEASE NOTE
The optional unlock module must be installed by a competent
installer. Care should be taken to correctly connect the polarity
when using the optional 12 (max) power supply. The unlock
module operates a contact with a maximum rating of 240 10A,
which can be used for automatic locks, switching on lighting
etc. This must be installed by a fully qualified electrician.
Please note: When using an external power supply unit to
power the outdoor station, the batteries inside the outdoor
station must be removed before connecting the power supply.

If the handset is successful in finding a Base Station
the handset eill enter the standby mode, the display
will show hanset number on the handset name (if
you have one saved as described on page 25), signal
icon and current time. If the handset is unsuccessful
in finding a Base Station, the handset will behave
according to the Out or Range condition.
If the handset is unsuccessful in finding a Base Station
or should you need to re-register the handset then
please refer to page 39 ‘Registration’.

Part One: Cordless Handset