Ress FM7 User manual
Manual
Monitor FM7
RESS
The Producer
Visual Inspection Sweep Instruments Measuring Instruments
Summary of the contents
Troubleshooting / maintenance / service page 8
Monitor FM7
page 4
page 5
page 7
- Commissioning / Safety Notes
- Start-up
- Working with the device
- Power supply
- Specifications
RESS 3
4 RESS
Monitor FM7
Art.-Nr. 2800
1. Delivery contents
- Monitor FM7
- Charger
2. Safety Notes
- The video inspection system is not waterproof!
- The video inspection system is not for use in the medical field!
- Any kind of reparations on inside of the unit, must be carried out, exclusively by qualified staff!
(If required, contact the RESS-customer service)
- The connection and disconnection, the respective components of the system, must always
be carried out without power supply!
- The video inspection system must be switched off after it has been used!
- To clean the monitor and the housing, please use a damp, clean cloth to prevent
scratches! We recommend a microfibre cloth.
- Please avoid contact with water of any kind.
- Please avoid collisions at any time! (use strap)
- Do not use aggressive cleanser for cleaning!
- Do not use the inspection system near a strong magnetic field!
- Avoid temperatures above 40 degrees Celsius. Only accomplish an inspection if heating is
switched off!
- This product has a certificate of conformity according to the guidelines 2004/108/EG.
3. Start-up
1 monitor
2 cable socket / charging socket
3 on/off slide switches
3 on/off-switch
RESS 5
1
2
5. Working with the device
Never forget to turn the camera off (6) at the end of an inspection, to avoid discharging the
battery unnecessarily! Press the button for 3 seconds.
Advice:
Power supply
At a new purchase of the devices, the battery is empty. The using time with a full charged battery is approxi-mately
4 hours, depending on which camera head is connected. Over the charging socket the monitor will be recharged.
The delivery contents a charger. This will recharge the battery. Charging takes round about 2 hours. The charger
has an over-discharge-protection. It automatically switches off when the battery is fully charged. If the device has
not been used for a long time, it is necessary to check, if the battery voltage has dropped. If this is the case, then
reconnect with charger.
To charge the battery, please switch off the Monitor by pushing the on/off
switch to the right. Connect the charger plug to the socket of the handset.
Connect the power plug with the 230V socket. The LED light of the charger
will shine yellow when connected correctly and will turn orange while
charging.
When charging is completed, the LED light will blink green and orange. After
a while the charger will turn into a standby mode. Then the LED light will turn
green.
Charging battery:
6 RESS
4. Start-up
By using the on/off switch the whole camera
system is put into use.
Slide switch to the left: On
Slide switch to the right: Off
Connect the cable quick plug with the socket of the monitor.
Place the the white arrow with the open lock above the
white mark, connect and lock by a quarter turn clockwise.
To unlock turn anticlockwise.
RESS 7
Monitor FM5:
6. Technical data
Overall dimension:
Weight:
Casing:
Monitor:
Power supply:
Operating time:
Charging time:
ca. 134 x 162 x 33 mm (LxHxW)
ca. 750 g
Synthetic material
5" LCD-TFT-color screen (102 x 73 mm)
Lead acid battery 12V/2100mAh
Approx. 4 hours (depending on the camera head that is being used)
Approx. 2 hours
Monitor does not charge or started to flicker. - The charging function is only possible when monitor
is switched off. Please switch off the Monitor by
pushing the on/off switch to the right.
Troubleshooting / Maintenance / Service
Fault Solution
The device does not turn on. - Maybe the battery is too low? Try again after re-
charging. The device needs a basic voltage,so the
monitor can be started.
- Check the plug connection to the Camera Head.
Care and service
- Please clean on a regular base. Do not use aggressive cleanser of any kind!
- Please avoid contact with water at all times and of any kind!
Attention: Warranty is void when monitor has been open manually.
SERVICE-Hotline: +49 5208/9127-0
8 RESS
RESS GmbH & Co. KG
Am Hasselbruch 28
D-32107 Bad Salzuflen
Tel. ++ 49 52 08 / 91 27 0
Fax ++49 52 08 / 80 30
info@ress.de
Internet-Shop: www.ress.de 12.03.2018
RESS
The Producer
Visual Inspection Sweep Instruments Measuring Instruments
Table of contents
Other Ress Monitor manuals
