
Precautions
Important
Before connecting AC power, make sure that the device is in OFF state. This device can only
connect AC household power.
Using AC Power
-Plug one end of the AC power cord into the AC power socket (16) and the other end into a 220V household
power outlet.
-In OFF state, the power supply in the machine is not completely cut off, and the power supply can only be cut off
completely by unplugging the power plug
-When unplugging the AC power cord, you should hold the plug part instead of only pull the power cord
-Never touch the AC power plug when your hands are wet. Otherwise it may cause fire or electric shock
-Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
-When using a socket, do not use too many power plugs at the same time, and do not lengthen the power cord at
will. If the socket is overloaded, it may cause fire or electric shock
-The device for disconnecting it from the grid power supply is the power plug. When using it, make sure that you
can easily access the power plug so that the device can be disconnected from the power supply.
-If an AC power cord is used for power supply, please purchase a certified AC power cord
CD Playback Operation
It supports CD/CDR/ CDRW/M P3/WMA format playback
A.Press Power Button to turn on the device
B.Open the CD door(2) and place a CD disc with CD/CDR/CDRW/MP3/WMA format files on the center spindle
with the correct direction, then close the door
C.Press CD/USB/TF mode selector button (12) to switch to CD play mode, “----” icon shows on the display, after
the detection is completed, the total track and current track number will shows on the LCD display, then shows
the playback time after about 2 seconds.
D.In playback state, press “ ”button to select the next song or press “ ” button to select the previous song to
play, or long press the “ ”or “ ” button for fast forward or backward. Press “ ”to pause playback, and press
this button again to resume playback.
E.Press “■” button to stop playing
F.Press “ ” button to adjust to the desired volume
G.In playback state, press the "REP” button to switch single song repeat or all repeat mode
Remote Control Operation
A.The device will enter Mute mode after pressing “ ” button, press it again to return to the normal working mode
B.Press “ ” or “ ” button to select the next or previous song to play
Use the numeric keys to select a specific song, e.g, if you want to play the 25th track, enter number “2” then “5”,
it will jump to this track to play within 3 seconds.
Note:
Do not use irregularly shaped laser discs, otherwise, it will cause malfunctions
Do not put more than one disc in the CD compartment at the same time
Do not try to open the CD compartment door during the playback
Do not touch the CD head, otherwise, it will cause a malfunction
USB / TF card Playback Operation
A.Insert the USB / TF card that with MP3 format files into the USB(15) / TF Card Socket (17)
B.Press CD/USB/TF mode selector button (12) to switch to USB / TF Card play mode, it will be played after the
detection is completed
Serial No. Name Operating Instructions
22 Program button
05
In CD/USB/TF mode, for example, when the disc stops playing, press this key
to enter.Programming interface, press the up or down key to select the
required sequence of tracks. Sequence completion.
Press this key to confirm. Press the Play key to play in the sorted order. If
needed.
To stop playing, press the Stop button twice. To resume playing, press the
Play button.