Retro Roller F1 898 User manual

Instruction manual
Retro roller model F1 898
Imported by Van der Meulen.
www.retroroller.eu
PLEASE NOTE! Assembly must be done
by an adult. Keep out of reach of young
children because of the small parts.
IMPORTANT:
1. For the child’s safety, all assembly steps must be
carried out properly. Incorrect assembly could
cause injury.
2. Lubricate moving parts regularly or after long-
term use.
3. Ensure that all nuts and bolts have been tightened
before use. Check nuts and bolts regularly and
tighten where necessary.
4. Components showing signs of wear should be
replaced immediately.
5. The child should never be left unattended when
riding in the vehicle.
1
Tool required: short
or
Part no x Qty
Some parts may hav already been pre-assembled
upon receipt.
2
2
3
HARWARE SET COMPONENTS
No.
*898.8001
*898.8002
*898.8003
*898.8004
*898.8005
*898.8006
Qty
1
8
1
8
4
4
Description
Hexagon locknut
Hexagon locknut
Machine screw
Machine screw
Self tapping screw
Hub cap
Spec.
M4
Ø3/16”
M4x24mm
Ø3/16x13mm
Ø4/13mm
Ø10mm
* Standard hardware items may be purchased locally
(898.001) x1
(898.8001) x1
(898.002) x1 (898.003) x1
(898.004) x1 (898.005) x1
(898.006) x2 (898.007) x1
(898.008) x4 (898.009) x1
(898.010) x1 (898.011) x1
(898.8002) x8 (898.8003) x1
(898.8004) x8 (898.8005) x4 (898.8006) x4

Adult supervision is required! Please make certain that anyone who uses this vehicle has been fully instructed as to the
operations of the vehicle.
WARNING: This vehicle does not have a braking system. Do not ride on steep hills, staircases or on or near water. Never
use vehicle on rough terrain, for jumping or other stunts. No more then one child can be on the vehicle at any time (sin-
gle passenger only). Shoes and helmet should be worn at all times, to prevent injuries.
Suitable for children over 24 months.
© 2014
4
5
(898.8005) x4
(898.8004) x8
(898.8003) x1
(898.8002) x8
(898.8001) x1
short
(898.8006) x4