REV calix 844 User manual

pairing instructions
1Connect wireless set-top box to power
and wait until a prompt appears asking
you to connect.
2Press OK on the wireless set-top box.
3Go to the RG, press and release the WPS
button 3 times to activate the WPS Process.
4The light next to WPS will blink ORANGE.
5A gear icon will appear indicating the connection sequence is in progress.
6When three horizontal dots appear, the connection has been successful.
7On the front pane of the wireless set-top box, two or more LEDs on the signal
strength indicator will light-up GREEN.
WPS
3
Y Pb Pr
OPTICAL
NETWORK R L
AUDIO
VIDEO OUT
WPS
Set-top box
Power supply unit
AC electrical
outlet
Y Pb Pr
OPTICAL
NETWORK R L
AUDIO
VIDEO OUT
WPS
Set-top box
Power supply unit
AC electrical
outlet
2
1
calix 844
- 

1POWER
Turns the set-top box on or places it in standby.
To restart, press and hold the POWER button for
10 seconds. The LED lights green when on.
2USB PORT
USB connector. (Reserved for future use)
3SIGNAL STRENGTH INDICATOR
Identifies the strength of the wireless connection.
4LINK
Indicates network link status. The light is green.
5HD
Indicates the set-top box is set to an HD resolution.
The light is blue.
6RECORD
Indicates that a recording is in progress.
The light is red.
7IR SENSOR
Receives the infrared signal from the remote
control. The sensor is behind the front panel.
8MENU
Accesses the on-screen menu.
9ARROW KEYS
Access on-screen services & navigate menus.
10 OK
Selects the current item.
1 2 3 4 5 6 7 8 9 10
wireless set-top box
v01.2022
TOLL FREE
(866) 881-4REV
     - & 