Revo EPH-6 User manual

EPH-6
Remote Controlled
Electronic
Panoramic Head
for Smartphones and Cameras

Thank you for choosing Revo.
The Revo EPH-6 is an electronic panoramic head that adds up
to 360° of continuous panning for video or time-lapse
photography. This panning head is ideal for novice and
intermediate photographers and videographers. It can be used
on any flat surface, or mounted on a tripod or camera slider,
to add stunning cinematic effects to your projects.
The panoramic head allows the selection of 90°, 180°, and
360° panning angles at speeds of 15, 30, or 60 minutes.
This is ideal for real-time video or time-lapse photography
with cameras or smartphones that have time-lapse or interval
capture functionality. It’s operated by the included remote that
can control the unit at up to 30 feet away. The head also
offers Bluetooth compatibility so you can trigger a
smartphone camera from the remote.
Pan: 6 lb. (2.7 kg) Tilt: 3 lb. (1.4 kg)
Vertical: 3 lb. (1.4 kg) Inverted: 3 lb. (1.4 kg)
Charge time: 2 hr. Operation time: 4 hr.
Standby mode: 8 hr.
Height: 2.3” (5.8 cm) Diameter: 3.7” (9.4 cm)
1 lb. (0.45 kg)Weight:
Android 3.0 and later, iOS 4.0 and later
Maximum load:
Power:
Dimensions:
Bluetooth:
Panoramic Head
Remote Control
Power:
Operating range:
Dimensions (L×W×H):
Weight (with battery):
CR2025 3 V Lithium Battery
Up to 30”(9.1 m)
3.3” × 1.5”× 0.2” (8.4 × 3.8 × 0.5 cm)
0.5 oz. (14.2 g)
Specifications

Overview
Rotator
Bubble level
1/4”-20 mount
Rotation angle
indicators
IR receiver
Angle
indicators
Bottom base
USB port
Charging
indicator
Mounting socket
(with bushing)
Power switch
Power
indicator
Stop Shutter
Time selectors
Direction selectors
Angle selectors
Battery
compartment
Time
indicator
90°180°360°
15'
30'
60'

Mounting the Panoramic Head and Attaching a Camera
The EPH-6 can be used on a tabletop, mounted on a tripod,
or mounted on a slider. To use the panoramic head on a
tripod or slider, follow these steps:
Note: The mounting socket comes with a preinstalled 3/8” to 1/4”
reducer bushing. If the tripod or slider mounting post is 3/8”,
unscrew the bushing to mount the panoramic head.
1. Align the mounting socket of the panoramic head with
the mounting post of a tripod or slider, and carefully
screw the panoramic head onto the mounting post. Make
sure the panoramic head is flush with the base of the
tripod or slider.
2. Use the bubble level to orient the head with the horizon.
Alternate #1: The panoramic head can be mounted onto a
ballhead or a video head. Mount the head onto the tripod or
slider before following the instructions to mount the
panoramic head.
Alternate #2: A ballhead can be placed on top of the
panoramic head, and a camera mounted to the ballhead.
This setup can vary the angle during rotation.
3. Align the camera’s mounting socket with the 1/4”
mounting post.
4. Screw the camera onto the panoramic head, and make
sure the bottom of the camera is flush with the rotator.
Operating the Panoramic Head
Note: Make sure that the IR receiver on the panoramic head and
the IR transmitter on the remote are facing each other and there is
no obstruction of the line of sight.
1. Move the power switch to the On position.

2. Select the angle and speed setting on the remote control. The
LEDs will indicate your selections on the panoramic head.
3. Select the panning direction on the remote control. The
angle and speed LEDs will blink to indicate that the
rotator is moving.
To discontinue operation, press the stop button on the
remote.
Using Bluetooth
The panoramic head is Bluetooth compatible. To trigger your
smartphone camera via the remote control, follow these steps:
1. Turn on the panoramic head. The power LED will flash to
indicate that it is searching for a Bluetooth device.
2. Open the Bluetooth preferences on your phone, and
select REVO EPH-6 in the device list. Wait until the
phone indicates that Bluetooth is connected.
3. Open the camera app on your smartphone.
4. Point the remote control at the panoramic head, and
press the shutter button. This will trigger the phone’s
camera.
Charging the Panoramic Head
When the battery is low, the blue power indicator will flash
quickly.
1. Plug the Micro-B USB connector into the USB port of the
Panoramic head.
2. Plug the Standard-A USB connector into a powered USB
port on a computer or into a USB wall charger. The
power indicator will glow red. When it’s fully charged, the
indicator will turn off.

GG1
REVO
A Gradus Group Brand
TM
Precautions
• Please read and follow these instructions, and keep this manual in a safe place.
• Don’t turn the rotator by hand. Doing so can damage the motor.
•Keep this unit away from water and any flammable gases or liquids.
• Clean the unit with only a soft, dry cloth.
• Make sure the item is intact and that there are no missing parts.
• Do not exceed the maximum load capacity.
•Do not attempt to disassemble or repair the equipment—doing so will void the
warranty, and Revo will not be responsible for any damage.
• All images are for illustrative purposes only.
One-Year Limited Warranty
This REVO product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a
period of one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by the
warranty provider. If the product has been discontinued, the warranty provider
reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This
warranty provides you with specific legal rights, and you may also have
additional rights that vary from state to state.
To obtain warranty coverage, contact the Revo Customer Service
Department to obtain a return merchandise authorization (“RMA”) number,
and return the defective product to Revo along with the RMA number and
proof of purchase. Shipment of the defective product is at the purchaser’s
own risk and expense.
For more information or to arrange service, visit www.revocinegear.com or call
Customer Service at 212-594-2353.
REVO is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved.
Product warranty provided by the Gradus Group.
www.gradusgroup.com