Revo SR-1000B User manual
SR-1000B
Video
Shoulder
Support Rig
Thank you for choosing Revo and congratulations
on your purchase of the Revo SR-1000B Video
Shoulder Support Rig
The Revo Video Shoulder Support Rig is a compact
camera stabilization rig that uses a comfortable
foam padded shoulder pad mount and a hand grip to
help you support your camera and keep it steady
when shooting video. The SR-1000B reduces
muscle fatigue, while eliminating distracting camera
movement for smoother, more professional-looking
movies. It can support cameras weighing up to 5.5
pounds.
The SR-1000B is height-adjustable and can be used
on the left or the right shoulder, with a hand grip
that’s detachable and can be used as a stand-alone
support for lightweight cameras. The SR-1000B
weighs just 2.25 pounds.
Warnings
•Please read and follow these instructions, and
keep this manual in a safe place.
•Handle the unit with care.
•Clean the unit with a soft, dry cloth.
•Use only parts provided by the manufacturer.
•Make sure everything is secure before proceeding.
•Make sure the item is intact and that there are no
missing parts.
•Do not exceed the maximum load capacity.
•All photos are for illustrative purposes only.
Components
Stainless steel shoulder
mount frame
Foam shoulder pad
Removable hand grip
Camera baseplate
Shoulder pad mounting plate with
two Allen screws (+ 1 spare)
Shoulder mount frame mounting
plate with one screw
Baseplate mounting plate
with one screw
Camera mounting screw
Allen wrench
One-year Limited Warranty
This Revo product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer
use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later. The
warranty provider’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of
this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by the
warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with
specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Revo Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Revo along with the
RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.revocinegear.com
or call Customer Service at 212-594-2353.
REVO
A Gradus Group Brand
TM
GG1
Revo is a registered trademark of the Gradus Group
© 2016 Gradus Group LLC. All Rights Reserved
Product warranty provided by the Gradus Group.
www.gradusgroup.com
SR-1000B
Video
Shoulder
Support Rig
Thank you for choosing Revo and congratulations
on your purchase of the Revo SR-1000B Video
Shoulder Support Rig
The Revo Video Shoulder Support Rig is a compact
camera stabilization rig that uses a comfortable
foam padded shoulder pad mount and a hand grip to
help you support your camera and keep it steady
when shooting video. The SR-1000B reduces
muscle fatigue, while eliminating distracting camera
movement for smoother, more professional-looking
movies. It can support cameras weighing up to 5.5
pounds.
The SR-1000B is height-adjustable and can be used
on the left or the right shoulder, with a hand grip
that’s detachable and can be used as a stand-alone
support for lightweight cameras. The SR-1000B
weighs just 2.25 pounds.
Warnings
•Please read and follow these instructions, and
keep this manual in a safe place.
•Handle the unit with care.
•Clean the unit with a soft, dry cloth.
•Use only parts provided by the manufacturer.
•Make sure everything is secure before proceeding.
•Make sure the item is intact and that there are no
missing parts.
•Do not exceed the maximum load capacity.
•All photos are for illustrative purposes only.
Components
Stainless steel shoulder
mount frame
Foam shoulder pad
Removable hand grip
Camera baseplate
Shoulder pad mounting plate with
two Allen screws (+ 1 spare)
Shoulder mount frame mounting
plate with one screw
Baseplate mounting plate
with one screw
Camera mounting screw
Allen wrench
One-year Limited Warranty
This Revo product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer
use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later. The
warranty provider’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of
this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by the
warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with
specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Revo Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Revo along with the
RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.revocinegear.com
or call Customer Service at 212-594-2353.
REVO
A Gradus Group Brand
TM
GG1
Revo is a registered trademark of the Gradus Group
© 2016 Gradus Group LLC. All Rights Reserved
Product warranty provided by the Gradus Group.
www.gradusgroup.com
The SR-1000B Shoulder Support Video Stabilizer is
a support that features two-point stabilization using
a shoulder mount and a hand grip.
1
2Attach the shoulder mount frame to the shoulder pad
using the shoulder mount frame mounting plate and
the included shoulder mount frame mounting plate
screw. With the screw in place, you can adjust the
vertical height of the rig by loosening the screw slightly
and moving the shoulder mount frame up or down until
it’s at desired height. Then tighten the mounting screw
securely. Do not overtighten.
Install the shoulder pad mounting plate on to the
shoulder pad using the two included Allen screws and
the included Allen wrench. If the SR-1000B will be on
the right shoulder, place the plate so that the long part
of the plate extends to the right of the screws. If the
left shoulder will be holding the support, the long part
of the plate should extend to the left of the screws.
3Attach the camera baseplate to the shoulder mount
frame using the baseplate mounting plate and the
baseplate mounting plate screw. After the baseplate is
mounted to the shoulder mount frame, you can adjust
the baseplate by loosening the screw and sliding the
baseplate forwards or back. When the baseplate is in
the correct position, tighten the mounting screw
securely. Do not overtighten.
4Mount the hand grip to the shoulder mount frame by
screwing the end of the hand grip into the hole
provided at the end of the camera baseplate. Align the
hand grip correctly to the hole, which is angled slightly.
Tighten the hand grip securely.
7Adjust the distance of the camera from your eye by
loosening the baseplate mounting screw slightly and
sliding the camera forward or back to the desired
position. Tighten the screw securely. Do not
overtighten.
5Screw the camera mounting screw into the camera
baseplate using one of the holes provided.
8To adjust the vertical position of the camera, loosen
the shoulder mount frame mounting plate screw and
slide the shoulder mount frame up or down to the
desired position. Tighten the screw securely. Do not
overtighten.
When you’re finished shooting, remove the camera
from the shoulder mount.
Visit RevoCinegear.com for more information on
our complete line of video mounting products.
•Slots on end of the shoulder
pad may be used for
additional accessories such as
counterweights and shoulder
straps.
•Hand grip may be used as a
standalone grip for smaller
cameras.
•Threaded holes in camera
baseplate may be used to
mount accesories with the
use of brackets.
6Attach the camera to the baseplate using the camera
mounting screw. Tighten securely.
The SR-1000B Shoulder Support Video Stabilizer is
a support that features two-point stabilization using
a shoulder mount and a hand grip.
1
2Attach the shoulder mount frame to the shoulder pad
using the shoulder mount frame mounting plate and
the included shoulder mount frame mounting plate
screw. With the screw in place, you can adjust the
vertical height of the rig by loosening the screw slightly
and moving the shoulder mount frame up or down until
it’s at desired height. Then tighten the mounting screw
securely. Do not overtighten.
Install the shoulder pad mounting plate on to the
shoulder pad using the two included Allen screws and
the included Allen wrench. If the SR-1000B will be on
the right shoulder, place the plate so that the long part
of the plate extends to the right of the screws. If the
left shoulder will be holding the support, the long part
of the plate should extend to the left of the screws.
3Attach the camera baseplate to the shoulder mount
frame using the baseplate mounting plate and the
baseplate mounting plate screw. After the baseplate is
mounted to the shoulder mount frame, you can adjust
the baseplate by loosening the screw and sliding the
baseplate forwards or back. When the baseplate is in
the correct position, tighten the mounting screw
securely. Do not overtighten.
4Mount the hand grip to the shoulder mount frame by
screwing the end of the hand grip into the hole
provided at the end of the camera baseplate. Align the
hand grip correctly to the hole, which is angled slightly.
Tighten the hand grip securely.
7Adjust the distance of the camera from your eye by
loosening the baseplate mounting screw slightly and
sliding the camera forward or back to the desired
position. Tighten the screw securely. Do not
overtighten.
5Screw the camera mounting screw into the camera
baseplate using one of the holes provided.
8To adjust the vertical position of the camera, loosen
the shoulder mount frame mounting plate screw and
slide the shoulder mount frame up or down to the
desired position. Tighten the screw securely. Do not
overtighten.
When you’re finished shooting, remove the camera
from the shoulder mount.
Visit RevoCinegear.com for more information on
our complete line of video mounting products.
•Slots on end of the shoulder
pad may be used for
additional accessories such as
counterweights and shoulder
straps.
•Hand grip may be used as a
standalone grip for smaller
cameras.
•Threaded holes in camera
baseplate may be used to
mount accesories with the
use of brackets.
6Attach the camera to the baseplate using the camera
mounting screw. Tighten securely.
The SR-1000B Shoulder Support Video Stabilizer is
a support that features two-point stabilization using
a shoulder mount and a hand grip.
1
2Attach the shoulder mount frame to the shoulder pad
using the shoulder mount frame mounting plate and
the included shoulder mount frame mounting plate
screw. With the screw in place, you can adjust the
vertical height of the rig by loosening the screw slightly
and moving the shoulder mount frame up or down until
it’s at desired height. Then tighten the mounting screw
securely. Do not overtighten.
Install the shoulder pad mounting plate on to the
shoulder pad using the two included Allen screws and
the included Allen wrench. If the SR-1000B will be on
the right shoulder, place the plate so that the long part
of the plate extends to the right of the screws. If the
left shoulder will be holding the support, the long part
of the plate should extend to the left of the screws.
3Attach the camera baseplate to the shoulder mount
frame using the baseplate mounting plate and the
baseplate mounting plate screw. After the baseplate is
mounted to the shoulder mount frame, you can adjust
the baseplate by loosening the screw and sliding the
baseplate forwards or back. When the baseplate is in
the correct position, tighten the mounting screw
securely. Do not overtighten.
4Mount the hand grip to the shoulder mount frame by
screwing the end of the hand grip into the hole
provided at the end of the camera baseplate. Align the
hand grip correctly to the hole, which is angled slightly.
Tighten the hand grip securely.
7Adjust the distance of the camera from your eye by
loosening the baseplate mounting screw slightly and
sliding the camera forward or back to the desired
position. Tighten the screw securely. Do not
overtighten.
5Screw the camera mounting screw into the camera
baseplate using one of the holes provided.
8To adjust the vertical position of the camera, loosen
the shoulder mount frame mounting plate screw and
slide the shoulder mount frame up or down to the
desired position. Tighten the screw securely. Do not
overtighten.
When you’re finished shooting, remove the camera
from the shoulder mount.
Visit RevoCinegear.com for more information on
our complete line of video mounting products.
•Slots on end of the shoulder
pad may be used for
additional accessories such as
counterweights and shoulder
straps.
•Hand grip may be used as a
standalone grip for smaller
cameras.
•Threaded holes in camera
baseplate may be used to
mount accesories with the
use of brackets.
6Attach the camera to the baseplate using the camera
mounting screw. Tighten securely.
SR-1000B
Video
Shoulder
Support Rig
Thank you for choosing Revo and congratulations
on your purchase of the Revo SR-1000B Video
Shoulder Support Rig
The Revo Video Shoulder Support Rig is a compact
camera stabilization rig that uses a comfortable
foam padded shoulder pad mount and a hand grip to
help you support your camera and keep it steady
when shooting video. The SR-1000B reduces
muscle fatigue, while eliminating distracting camera
movement for smoother, more professional-looking
movies. It can support cameras weighing up to 5.5
pounds.
The SR-1000B is height-adjustable and can be used
on the left or the right shoulder, with a hand grip
that’s detachable and can be used as a stand-alone
support for lightweight cameras. The SR-1000B
weighs just 2.25 pounds.
Warnings
•Please read and follow these instructions, and
keep this manual in a safe place.
•Handle the unit with care.
•Clean the unit with a soft, dry cloth.
•Use only parts provided by the manufacturer.
•Make sure everything is secure before proceeding.
•Make sure the item is intact and that there are no
missing parts.
•Do not exceed the maximum load capacity.
•All photos are for illustrative purposes only.
Components
Stainless steel shoulder
mount frame
Foam shoulder pad
Removable hand grip
Camera baseplate
Shoulder pad mounting plate with
two Allen screws (+ 1 spare)
Shoulder mount frame mounting
plate with one screw
Baseplate mounting plate
with one screw
Camera mounting screw
Allen wrench
One-year Limited Warranty
This Revo product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer
use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later. The
warranty provider’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of
this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by the
warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with
specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Revo Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Revo along with the
RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.revocinegear.com
or call Customer Service at 212-594-2353.
REVO
A Gradus Group Brand
TM
GG1
Revo is a registered trademark of the Gradus Group
© 2016 Gradus Group LLC. All Rights Reserved
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Table of contents
Other Revo Camera Accessories manuals
Popular Camera Accessories manuals by other brands
Axis
Axis TQ1602-E installation guide
ionGen
ionGen GTX12V315A-E2107-CS200RV Installer's guide
Angler
Angler Muslin Background 2543-W-1024 instructions
Aigis Mechtronics
Aigis Mechtronics HS9349 SERIES Installation and operating instructions
Nikon
Nikon MD-4 instruction manual
APEXEL
APEXEL APL-HB5 user manual
