Revo PHR-6 User manual

Overview
Stop
PHR-6
Time
selectors
Direction
selectors
Shutter
Angle
selectors
Battery
compartment
90°180°360°
15'
30'
60'
CR2025 3 V
lithium battery
GG1

Using the remote with the EPH-6
1. Slide the battery compartment out to install
a new battery. Make sure to note the “+” icon
on the compartment to install the battery
with the correct orientation.
2. Select the panning angle and the panning
speed first. The corresponding LEDs will light
up on the panoramic head.
3. Press one of the direction selectors. The
panoramic head will immediately begin to
move. The angle and speed LEDs will blink
to indicate that the head is in motion.
To discontinue panning, press the stop button.
Angle and speed selections will be retained.
To resume panning, press the appropriate
direction selector.
The trigger button
This button triggers the camera on a
Bluetooth-connected smartphone. Refer to the
manual that came with the EPH-6 for
instructions on how to pair a Bluetooth device
with the panoramic head.