REXON BA-10 User manual
PTT
Jack for earphone and microphone
Power and LED indicator / Phone buon
Micro-USB and Charger
Clothing Clip
Volume Up
Volume Down
Power ON/OFF LED and Tone Indicators
Power switch to power on/o
Press 6 sec to Pairing mode
First e conne, verify that both the host and the wireless
device are in pairing mode
Press and hold the power buon for 6 sec, then into pairing mode,
Blue LED blinks every 1 sec and pairing mode Tone.
Once the devices are paired successfully, a ring indican is played
on the audio device. And blue LED illuminate for 2 sec. then blue Led
Heartbeat: Long OFF and Short ON
Wireless Link and Pairing Indicators
BA-10 is the wireless PTT for two way radio.
By establish a link between BA-10 and wireless adaptor*, communica
securely transmiA-10
!
Overview
Control & Connections
ON/OFF
Pairing
#"-Bluetooth Adaptor
REXON TECHNOLOGY CO.,LTD
Telehone:+886-4-24914141 Fax:+886-4-24912042
Address: 261, Jenhua Rd., Dali Dist, Taichung City 412 Taiwan,
Website: http://www.rexontec.com.tw
E-Mail: [email protected]
Table of contents
