RF-Link AVS-5808 User manual

RF-Link
Model: AVS-5808
5.8GHz 8-channel AV System
1. Package Content………………………………………………..……………2
2. Panel Control and Function……...……………………………..……………4
3. Setup Guide…………………..……………………….……….…… ………5
4. Important Safety Information….………………...……..……… ……...……6
1
Contents
2507V58RL080

Check to make sure that all units shown as below are enclosed. If something
missed, please contact your dealer.
1. 5.8GHz Transmitter x 1 2. 5.8GHz Receiver x 1
3. Antennax2 4. BNCtoRCAconnectorx2
4. Accessories
European Standard:
(1)PowerAdapter (230V)x2 (2)RCAtoScartcablex2
USA Standard
(1)PowerAdapter(120V)x2 (2)RCACablex2
5.8GHz Transmitter
5.8GHz Transmitter
1. Package Content
2 3

5.8GHz Transmitter / 5.8GHz Receiver
1 –Channel selector(5CH or 8CH).
8CH→No：0,1 is CH1； 8,9 is CH8
5CH→No：0,1 is CH1； 5,6,7,8,9 is CH5
2 –Video level adjustment
3 –Power indicator light.
4 –Power ON/OFF switch.
5 –DC power input.
6 –Audio jack left (white).
7 –Video jack BNC connector.
8 –Audio jack right (red).
9 –Antenna SMAconnector.
To enjoy a life of wireless video and audio, just connect the transmitter to any
A/V source you like and connect the receiver to a TV, monitor or speaker in
another location.
□ Transmitter
□ Receiver
NOTE: Make sure the ON/OFF switch is in the 「OFF」position before connection
3. Setup Guide2. Panel Control and Function
Connect one end of the RCA cable (or scart cable) to the audio and video jacks,
and connect the other end to a source device via its “AV output”.
1. Connect the DC plug of the adapter to the DC jack, and connect the power
1Connect one end of the RCA cable (or scart cable) to the audio and video jacks,
and connect the other end to a TV (or monitor, speakers) via its “AV input”.
1. Connect the DC plug of the adapter to the DC jack, and connect the power
supply to an outlet.
54

To prevent fire or shock hazard, do not expose this product to rain and
moisture. For example: do not use near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or nearby a swimming pool. To avoid electric
shock, do not take apart this product, provided as an accessory. This product
should be operated only under power supply. Do not overload wall outlets and
extension outlets as this can result in the risk of fire or electric shock.
4. Important Safety Information
□ NOTE:
This equipment has been tested and found to comply with the limits regulated
by FCC and CE. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction, may cause harmful interference
to radio communications. The change or modifications no expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment. To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the device exceeding the
RF exposure requirements and void user’s authority to operate the device.
6