6 DTR_102-02-07-001_EN_f
5.3 Manual setting of the time and date
To set the clock (enter the current date and time), you should:
1) Call the configuration menu by pressing the MENU key.
2) Select the „F1” function using the ↑and ↓keys and confirm it with the →key. →.
3) Using the ↑and ↓ keys, modify the date and the time. Successively enter: the day of the month, the
month, the year, the hour, the minute, and confirm the parameters with the → key.
4) After entering the complete time, the clock will automatically exit the menu.
NOTICE!
A blinking number indicates the time or date parameter which is being modified.
NOTICE!
To ensure that the device makes automatic changes between the daylight saving time and standard time
correctly, it is necessary to properly configure the time zone and to activate taking into account the daylight
saving time.
NOTICE!
When you set the clock on the last Sunday in March or on the last Sunday in October, take into account the
information included in point 6. Daylight saving time.
5.4 Configuration of the presented parameters
To activate/deactivate displaying individual information and to modify the time of its presentation (the clock,
the date, the thermometer), you should:
1) Call the configuration menu by pressing the MENU key.
2) Select the „F2” function using the ↑and ↓keys and confirm it with the →key.
3) To activate displaying the clock (C) set Y using the ↑and ↓keys and confirm it with the → key.
4) Next, using the ↑and ↓ keys, modify the clock display time „Cd” and confirm it with the → key.
5) To activate the display of the date (d) set Y using the ↑and ↓keys and confirm it with the → key.
6) Next, using the ↑and ↓ keys, modify the date display time „dd” and confirm it with the → key.
7) To activate the display of the thermometer (t) set Y using the ↑and ↓keys and confirm it with the →
key.
8) Using the ↑and ↓ keys modify the temperature display time „td” and confirm it with the → key.
9) The clock will return to the main menu; to exit the main menu, press the ← key.
NOTICE!
If the respective parameter of the presentation (the clock, the date or the thermometer) is deactivated by
setting N, the parameter presentation time step will be skipped.
5.5 Configuration of the date format
To change the displayed date format, you should:
1) Call the configuration menu by pressing the MENU key.
2) Select the „F3” function using the ↑and ↓keys and confirm it with the →key.
3) Using the ↑and ↓ keys, select your preferred format of displaying the date and confirm it with the →
key.
dny DD-MM YYYY
ndy MM-DD YYYY
ynd YYYY MM-DD
ydn YYYY DD-MM
dn DD-MM
nd MM-DD
4) The clock will return to the main menu; to exit the main menu, press the ← key.
