RGBlink RGB-RD-UM-ASK nano E005 User manual

ASK nano User Manual
1
ASK nano
Wireless Presentation and Collaboration System
USER MANUAL
Article No: RGB-RD-UM-ASK nano E005
Revision No: V1.5

ASK nano User Manual
2
Content
Declarations.....................................................................................................................................................................3
FCC/Warranty..........................................................................................................................................................3
Operators Safety Summary.....................................................................................................................................4
Installation Safety Summary................................................................................................................................... 4
Chapter 1 Your Product...................................................................................................................................................5
1.1 In the Box.......................................................................................................................................................... 5
1.2 Product Overview............................................................................................................................................. 6
1.2.1 Interface................................................................................................................................................. 6
Chapter 2 Install Your Product........................................................................................................................................ 8
2.1 Pairing of TX and RX.......................................................................................................................................... 8
2.2 Receiver Installation..........................................................................................................................................8
2.3 Transmitter Installation.....................................................................................................................................9
Chapter 3 Use Your Product..........................................................................................................................................10
3.1 Homepage.......................................................................................................................................................10
3.2 Computer Screen Projection by TX.................................................................................................................10
3.3 Phone Screen Projection.................................................................................................................................11
3.3.1 Apple.................................................................................................................................................... 11
3.3.2 Android.................................................................................................................................................11
3.4 Examples Demonstration of Screen Projection..............................................................................................13
3.5 MENU.............................................................................................................................................................. 14
2.1.1 Add Wireless Network......................................................................................................................... 15
3.1.2 Switch the Language............................................................................................................................16
3.1.3 Screen Position.................................................................................................................................... 16
3.1.4 Airplay Mode........................................................................................................................................16
3.1.5 Meeting Invitation............................................................................................................................... 17
Chapter 4 Order Codes................................................................................................................................................. 18
4.1 Product Code...................................................................................................................................................18
Chapter 5 Support .......................................................................................................................................................19
5.1 Contact Us....................................................................................................................................................... 19
Chapter 6 Appendix...................................................................................................................................................... 20
6.1 FAQ.................................................................................................................................................................. 20
6.2 Specification....................................................................................................................................................21
6.3 Accessory Supplement....................................................................................................................................23
6.4 Terms & Definitions.........................................................................................................................................23
6.5 Revision History...............................................................................................................................................29

ASK nano User Manual
3
Thank you for choosing our product!
This User Manual is designed to show you how to use this video processor quickly and make use
of all the features. Please read all directions and instructions carefully before using this product.
Declarations
FCC/Warranty
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area may cause harmful interference, in which case the user will be responsible for
correcting any interference.
Guarantee and Compensation
RGBlink provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms
of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage
incurred during transport, as well as for material and manufacturing faults. RGBlink must be informed
immediately in writing of any complains.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and
software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified
notice of compliant, RGBlink can repair the fault or provide a replacement at its own discretion within an
appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a
reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating
to compensation for direct or indirect damage, and also damage attributed to the operation of software as
well as to other service provided by RGBlink, being a component of the system or independent service,
will be deemed invalid provided the damage is not proven to be attributed to the absence of properties
guaranteed in writing or due to the intent or gross negligence or part of RGBlink.
If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if
the goods are handled incorrectly, in particular if the systems are
commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not
agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in
the guarantee coverage are system failures which are attributed to programs or special electronic circuitry
provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to
the guarantee provided by RGBlink either.
The environmental conditions as well as the servicing and maintenance regulations specified in this
manual must be complied with by the customer.

ASK nano User Manual
4
Operators Safety Summary
The general safety information in this summary is for operating personnel.
Do Not Remove Covers or Panels
There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous
voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover
installed.
Power Source
This product is powered by USB on TX end and DC 5V at RX end.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Installation Safety Summary
Safety Precautions
For all ASK nano installation procedures, please observe the following important safety and handling
rules to avoid damage to yourself and the equipment.
To protect users from electric shock, ensure that the chassis connects to earth via the ground wire
provided in the AC power Cord.
The AC Socket-outlet should be installed near the equipment and be easily accessible.
Unpacking and Inspection
Before opening ASK nano processor shipping box, inspect it for damage. If you find any damage, notify
the shipping carrier immediately for all claims adjustments. As you open the box, compare its contents
against the packing slip. If you find any shortages, contact your sales representative.
Once you have removed all the components from their packaging and checked that all the listed
components are present, visually inspect the system to ensure there was no damage during shipping. If
there is damage, notify the shipping carrier immediately for all claims adjustments.
Site Preparation
The environment in which you install your ASK nano should be clean, properly lit, free from static, and
have adequate power, ventilation, and space for all components.

ASK nano User Manual
5
Chapter 1 Your Product
1.1 In the Box
ASK nano Meet Set(TX*2+RX*1)
ASK nano Starter Set(TX*1+RX*1)
Type C - HDMI
Adapter*1
micro USB
Cable*2
HDMI
Adapter(female
tot female)*1
2.4G Wireless
Cable*1
HDMI
Cable(male to
female)*1
micro USB
Cable*2
2.4G Wireless
Cable*1
HDMI
Cable(male to
female)*1
Note: For Type C to HDMI Adapter,Type C(F) port connected with a charger can supply power to computer
or phone which connect with Type C(M) port.(Details refer to Appendix 6.3)

ASK nano User Manual
6
1.2 Product Overview
ASK nano is an intuitive and high efficiency wireless presentation and collaboration system that enables any
meeting participant to simply share the content from their laptop, mobile phone, or tablet on the projector or
large screen wirelessly, no APP required, no set up, no messy cables, just touch and share.
ASK nano also supports multicast, which is a group communication, where video transmission from one
transmitter is addressed to a group of receivers simultaneously.
ASK nano System Connection Diagram
1.2.1 Interface

ASK nano User Manual
7
TX Illumination
1
HDMI interface, connect display or projector
2
Projection key
3
Indicator light
4
Micro USB Power interface
RX Illumination
1
HDMI interface,connect display or projector
2
Mode switch key,switch TX/DLNA/AirPlay Mode
and Miracast Mode
3
Indicator light
4
Micro USB power interface
Indicator light
TX
Illumination
Light Red
TX is opening
Flash Blue
Waiting for the connection
Static Purple
Successful connection and projection
RX
Illumination
Flash Blue
RX is power on and ready for projection

ASK nano User Manual
8
Chapter 2 Install Your Product
2.1 Pairing of TX and RX
Before delivery, each ASK nano set has been paired , but when extra TX are required, following steps are the
method for users to finish TX/RX pairing.
(1) If you want to determine whether TX and RX have been paired:
①Powered on RX and TX(power RX up firstly),connect RX to HDMI port of the display;
②TX and RX will be pairing automatically and the indicator will turn into purple after 5 seconds.
(2) If you want to re-pair the paired ones:
①Powered on RX and TX(power RX up firstly),connect RX to HDMI port of the display;
②Press the TX button for 5 seconds to clear the previous pairing information;
③Re-plug TX and wait for 2 seconds,the indicator of TX will turn from red to blue,and the corresponding screen
on the RX will display “TX paired OK”;
④After successful pairing, the indicator light on the TX will turn into static purple.
2.2 Receiver Installation
1.Power on the RX via microUSB to USB cable and power adapter.
2.Connect RX’s HDMI port big screen, TV or projector.
Note: TX will auto pair to the closest RX,so once you will do the pairs,please make sure the dedicated RX to be
closed to be paired TX.
Note: RX must be Powered on.Power adapter should be supported by users.

ASK nano User Manual
9
2.3 Transmitter Installation
1. Connect the TX’s HDMI port to the PC’s HDMI port.
2. The light turns from red to flashing blue when TX is ready for projection.
3. Touch the projection key and the indicator light turns static purple,which means the projection is successful.
Note:If projection is unsuccessful,unplug the TX, and supply power to TX’s HDMI port via microUSB-USB cable
and power adapter,then connect TX’s HDMI port to the PC’s HDMI port again,touch the projection key to project.

ASK nano User Manual
10
Chapter 3 Use Your Product
3.1 Homepage
After RX is connected to big screen, the screen enters homepage,which will be set in English by default. Users can
switch the language to English in web page menu.(please refer to 3.5<Menu>)
You can find the the hotspot and password in top left corner as shown in the figure below;
RX hotspot name : ASK nano-XXXXXX; Password : 12345678;
3.2 Computer Screen Projection by TX
1. Connect TX’s HDMI port to Windows or macOS computer’s HDMI port,the indicator on TX will turn from red to
flash blue several seconds later,then touch the projection key to project when it is static purple.
2. If it is unsuccessful to project,you can unplug TX from computer and power on it,and the indicator light will
turn form red to flashing blue after several seconds.Touch the projection key lightly, the screen of the computer
will be projected to the big screen of RX.Touch the key again to stop projection.