
Product Care and Usage
Thank you for choosing Regency.
This piece of furniture was manufactured by Regency Seating Inc. With minimal care, your furniture will provide
you years of quality service. Your satisfaction is important to us. If you need assistance with any of the below
instructions, please contact our customer service department at 866-816-9822 or email us at customerser-
General
Your furniture should be dusted frequently using a soft, dry, lint-free cloth, dusting with the direction of the
wood grain. Do not use chemicals or abrasive materials to clean surfaces. Regency also recommends the use
of desk pads/ mouse pads for high use areas to protect nishes.
Care of Laminate/ Wood/ Veneer Surfaces
Gently wipe the surface to remove any surface dust. Clean with a damp cloth and dry with a lint-free cloth. Do
not use furniture polish that contains waxes and oils. Do not use bleach-based cleaners on laminate as it may
cause discoloration. While laminate is durable and easily cleaned, avoid using hard bristle brushes which may
scratch the laminate surface. Avoid sliding objects over the surface to prevent scratching. The use of coasters
is recommended to prevent stains from liquids.
Care of Metal Surfaces
Wipe smooth powder coat nishes and textured metals with a damp cloth. For stubborn stains and grease
marks, use soap and water.
Care of Leather/ Vinyl Surfaces
Dust only with a clean, dry, lint-free cloth. Do not use polish, wax, or liquid cleaner.
Care of Fabric Surfaces
Regularly clean your fabric with a vacuum or light brush. For spills, use a damp sponge to blot area. Follow up
by blotting with a dry, clean towel. Let air dry. Do not rub or scrub. Heat should never be used when cleaning
spills or stains. It can cause stains to set and become permanent.
Care of Plastic/ Polypropylene Surfaces
Clean with a mild soap-and-water solution applied to a clean, lint-free cloth. Gently wipe the surface to remove
any surface dust. Wipe dry with a new, clean, lint-free microber cloth
Care of Hardware
Regularly tighten all nuts, bolts and fasteners. Inspect all joints and ttings to be sure that all are secure. Check
and report missing hardware or loose joints.
Toll Free: 1-866-816-9822
Oce: 330-848-3700
Fax: 1-330-848-6260
2375 Romig Road
Akron, Ohio 44320
United States
Missing Parts? Assembly Questions?